QA Craftsman Oral Interview CORRECT
100%
What are the duties and responsibilities of craftsman? - ANSWERPerform all
maintenance
Fill out QA forms correctly
Initiate DFS FO NUC/NON-NUC
Ensure TMDE are in proper usage
What is the fundamental rule of all maintenance? - ANSWERTechnical specifications
must be met at all times
Explain a potential loss of cleanliness - ANSWERMinimal (Water) VS Significant
(JP5 Leak)
What are the craftsman's responsibilities involving TMDE? - ANSWERCurrent
calibration stickers/records attached, but not calibrated/tested TMDE will be
tagged/serviced immediately
Production, acceptance, testing
Name and define the different types of cleanliness we deal with. - ANSWERReactor
plant
Steam plant
Oxygen systems
Commercial
What must a craftsman do when an UNSAT condition is found during maintenance?
- ANSWERStop work process and report to superior (WCS)
Explain "Counter Torque". - ANSWEROpposition to rotational force
Explain the process for tightening multi fastener assemblies. - ANSWERUse a star
pattern
Prior to using Weight Handling Equip, what inspections must be done? - ANSWERAll
weight handling equipment, fittings, fixtures shall be tested and marked or tagged to
indicate completion of test prior to being placed into service.
List and explain at least 4 margin symbols. - ANSWERR= Steps requiring
verification/inspection (Radiological controls)
S= Steps in FMA procedure requiring verification by member of ship's force
C= Steps requiring cleanliness inspection by craftsman
I= Steps requiring inspection by QAI of NDT inspector
What are you required to do every time you sign as a craftsman. - ANSWERSign
with signature, print name, date
What is a WAF, and when do we use them? - ANSWERWork authorization form
100%
What are the duties and responsibilities of craftsman? - ANSWERPerform all
maintenance
Fill out QA forms correctly
Initiate DFS FO NUC/NON-NUC
Ensure TMDE are in proper usage
What is the fundamental rule of all maintenance? - ANSWERTechnical specifications
must be met at all times
Explain a potential loss of cleanliness - ANSWERMinimal (Water) VS Significant
(JP5 Leak)
What are the craftsman's responsibilities involving TMDE? - ANSWERCurrent
calibration stickers/records attached, but not calibrated/tested TMDE will be
tagged/serviced immediately
Production, acceptance, testing
Name and define the different types of cleanliness we deal with. - ANSWERReactor
plant
Steam plant
Oxygen systems
Commercial
What must a craftsman do when an UNSAT condition is found during maintenance?
- ANSWERStop work process and report to superior (WCS)
Explain "Counter Torque". - ANSWEROpposition to rotational force
Explain the process for tightening multi fastener assemblies. - ANSWERUse a star
pattern
Prior to using Weight Handling Equip, what inspections must be done? - ANSWERAll
weight handling equipment, fittings, fixtures shall be tested and marked or tagged to
indicate completion of test prior to being placed into service.
List and explain at least 4 margin symbols. - ANSWERR= Steps requiring
verification/inspection (Radiological controls)
S= Steps in FMA procedure requiring verification by member of ship's force
C= Steps requiring cleanliness inspection by craftsman
I= Steps requiring inspection by QAI of NDT inspector
What are you required to do every time you sign as a craftsman. - ANSWERSign
with signature, print name, date
What is a WAF, and when do we use them? - ANSWERWork authorization form
