DCASE Unit 1
What is CG-4 ? - ANS-The Engineering and Logistics Directorate
What is CG-41 ? - ANS-Office of Aeronautical Engineering
What is CG-43 ? - ANS-Office of Civil Engineering
What is CG-44 ? - ANS-Office of Logistics
What is CG-45 ? - ANS-Office of Naval Engineering
What does CG-45 oversee ? - ANS-SFLC and CG Yard
What is CG-451 ? - ANS-Program Management division of CG-45
What is CG-452 ? - ANS-Naval Projects Division of CG-45
Where does DCASE fall under ? - ANS-CG Liaison to US Navy Damage Control (US
Navy Directorate N-79) falls under CG-452
What is CG-46 ? - ANS-Office of Engineering Management
What is CG-47 ? - ANS-Office of Environmental Management
What does SFLC stand for ? - ANS-Surface Forces Logistics Center
What does SFLC do ? - ANS-Provide depot level maintenance, engineering, supply,
logistics, and information services to support CG missions
How many product lines does SFLC have and what are they? - ANS-5
IBCTPL - Ice Breaker, Buoy and Construction Tender Product Line (86 Hulls in total, all
'black hulls' and 'red hulls' longer than 65' (Not POLAR STAR / SEA))
MECPL - Medium Endurance Cutter PL (All WMEC 210' and WMEC 270' cutters and
USCGC EAGLE)
LREPL - Long Range Enforcer PL (All WHEC 378', WMSL 419', POLAR SEA, POLAR
STAR and ALEX HALEY)
PBPL - Patrol Boat PL (115+ Hulls, all WPB 87', WPB 110' and all FRC's)
SBPL - Small Boat Product Line (>1,800 Boats over 49 classes)
, Who is ultimately responsible for DC response ? - ANS-The CO who delegates down
What evolutions require CO approval? - ANS-Flooding / sealing a space, IDLH Entry,
Casualty Power, securing equipment under certain details ***Not all inclusive***
What is a MOU/A ? - ANS-Memorandum of Understanding/Agreement
What are MOU/A used for? - ANS-Agreement to have local fire dept. respond in case of
emergency normally so cutter can have smaller duty sections
What is the difference btw Qualified and Certified welders? - ANS-"Qualified" -
applicable to welders, inspectors, and weld procedure specifications, and indicates that
a minimum level of acceptability to a known standard or rule has been satisfied
"Certified" - Certification indicates that the welder or inspector has written proof of
qualification by testing
What is a critical weld? - ANS-"Critical Welds" - Welds in structure, piping, pressure
vessels and machinery, whose failure could threaten life, structural integrity, watertight
integrity, or asset interoperability
What is the difference between a critical and non-critical weld? - ANS-Critical welds,
upon failure, can cause serious harm or death to personnel as well as large scale
damage to structures or equipment. Non-critical welds will not cause severe injury or
damage if they fail
When are you allowed to deviate from specifications ? - ANS-ONLY in emergencies
How long after a deviation from specifications do you have to notify SFLC? Who should
you contact? - ANS-4 hours
PL Engineering Branch Chief and ESD-NAME-NAV ARCH
How long do you have to begin work to return to specifications? - ANS-within 14 days of
return to port
What status does your unit into when not within specification compliance ? - ANS-"C'
Status
How many Sections of the DC Closure Log are there ? What are they? - ANS-3
What is CG-4 ? - ANS-The Engineering and Logistics Directorate
What is CG-41 ? - ANS-Office of Aeronautical Engineering
What is CG-43 ? - ANS-Office of Civil Engineering
What is CG-44 ? - ANS-Office of Logistics
What is CG-45 ? - ANS-Office of Naval Engineering
What does CG-45 oversee ? - ANS-SFLC and CG Yard
What is CG-451 ? - ANS-Program Management division of CG-45
What is CG-452 ? - ANS-Naval Projects Division of CG-45
Where does DCASE fall under ? - ANS-CG Liaison to US Navy Damage Control (US
Navy Directorate N-79) falls under CG-452
What is CG-46 ? - ANS-Office of Engineering Management
What is CG-47 ? - ANS-Office of Environmental Management
What does SFLC stand for ? - ANS-Surface Forces Logistics Center
What does SFLC do ? - ANS-Provide depot level maintenance, engineering, supply,
logistics, and information services to support CG missions
How many product lines does SFLC have and what are they? - ANS-5
IBCTPL - Ice Breaker, Buoy and Construction Tender Product Line (86 Hulls in total, all
'black hulls' and 'red hulls' longer than 65' (Not POLAR STAR / SEA))
MECPL - Medium Endurance Cutter PL (All WMEC 210' and WMEC 270' cutters and
USCGC EAGLE)
LREPL - Long Range Enforcer PL (All WHEC 378', WMSL 419', POLAR SEA, POLAR
STAR and ALEX HALEY)
PBPL - Patrol Boat PL (115+ Hulls, all WPB 87', WPB 110' and all FRC's)
SBPL - Small Boat Product Line (>1,800 Boats over 49 classes)
, Who is ultimately responsible for DC response ? - ANS-The CO who delegates down
What evolutions require CO approval? - ANS-Flooding / sealing a space, IDLH Entry,
Casualty Power, securing equipment under certain details ***Not all inclusive***
What is a MOU/A ? - ANS-Memorandum of Understanding/Agreement
What are MOU/A used for? - ANS-Agreement to have local fire dept. respond in case of
emergency normally so cutter can have smaller duty sections
What is the difference btw Qualified and Certified welders? - ANS-"Qualified" -
applicable to welders, inspectors, and weld procedure specifications, and indicates that
a minimum level of acceptability to a known standard or rule has been satisfied
"Certified" - Certification indicates that the welder or inspector has written proof of
qualification by testing
What is a critical weld? - ANS-"Critical Welds" - Welds in structure, piping, pressure
vessels and machinery, whose failure could threaten life, structural integrity, watertight
integrity, or asset interoperability
What is the difference between a critical and non-critical weld? - ANS-Critical welds,
upon failure, can cause serious harm or death to personnel as well as large scale
damage to structures or equipment. Non-critical welds will not cause severe injury or
damage if they fail
When are you allowed to deviate from specifications ? - ANS-ONLY in emergencies
How long after a deviation from specifications do you have to notify SFLC? Who should
you contact? - ANS-4 hours
PL Engineering Branch Chief and ESD-NAME-NAV ARCH
How long do you have to begin work to return to specifications? - ANS-within 14 days of
return to port
What status does your unit into when not within specification compliance ? - ANS-"C'
Status
How many Sections of the DC Closure Log are there ? What are they? - ANS-3
