NIMS CNC OPERATOR TEST QUESTIONS &VERIFIED ANSWERS ALREADY GRADED A+ 2023/2024

. What button below would you push to manually input and physically execute programming commands? - ANS- . What considerations should you take into account when adding soluble oil to a CNC machine? - ANS0. What is the code for program stop? - ANS-M00 3. What button would you press to view the distance to go while running a program? - ANSA part dimension states that the depth of a bored hole must be within .001" (+/- .0005). When machining the first part how should the TLO (tool length offset) be set? - ANSA print calls out a finished part length of 3.25 inches. How long would you cut the stock for each part if you leave 1/8" for sizing? - ANSGiven an 18 ¾" length of stock, how many 2 ½'" pieces can be cut from it? - ANS-7.5 (18.75/2.5) How often should you check the lubrication levels on a machine? - ANS-Daily If you were boring a hole specified at 2.125" deep with a tolerance of +/-.001 and measured the part at 2.122" deep, what would you add or subtract from the Tool length offset to bore the hole to proper depth? - ANSOn a blueprint, what do you call a dimension in a box (boxed dimension)? - ANS-Base On a standard CNC lathe, what is the axis that controls length? - ANS-Z On a standard CNC lathe, what is the axis that controls the diameter? - ANS-x Standing in front of