Utah Permit Test 1 Questions And Answers Rated A+

Utah Permit Test 1 Questions And Answers Rated A+ In Utah, the maximum speed limit on interstate highways is In Utah, the speed limits on rural interstates are currently 75 mph and 80 mph. The area of the freeway beyond the solid white line is meant for The outer edge of the freeway in each direction is marked with a solid white line. Beyond that is the shoulder, which should be used only in an emergency. Never drive or pass on the shoulder. You may pass another vehicle if there is _________ next to your lane. You may pass another vehicle if there is a dashed line (white or yellow) next to your lane. In Utah, when you parallel park your vehicle next to a curb, your vehicle must be within _________ of the curb. When you parallel park your vehicle next to a curb, your vehicle must be within 12 inches of the curb. On a two-lane road, you have moved into the opposing lane to pass another vehicle. You must return to your original lane before any oncoming vehicle comes within _______ of you. Under Utah law, you must not use the opposing lane to pass another vehicle unless you can return to your original lane before any oncoming vehicle can come within 200 feet of you. On a highway, the left lane should be used for The left lane on a highway is used for passing. If a vehicle wants to pass you, you must move safely to the right. Do not increase your speed until the other vehicle has passed you. You are parking next to a curb, facing uphill. Which way should you point your front wheels? When you parallel park facing uphill, you should point your wheels away from the curb and then roll back slightly so that the rear part of the curbside front wheel rests against the curb. Under Utah law, you must dim your headlights whenever you are within _______ of an oncoming vehicle. Under Utah law, you must dim your headlights whenever you are within 500 feet of an oncoming vehicle or within 300 feet of a vehicle you are following. In Utah, fines for speeding in a work (construction) zone are _________ when workers are present. In Utah, fines for speeding in a work (construction) zone are at least doubled when workers are present, but only if there are signs posted to warn drivers about the increased fines. When you approach a stationary emergency vehicle with flashing lights, what must you do? When approaching a stationary emergency vehicle with flashing lights, you must reduce your speed, provide as much space as practical to the emergency vehicle, and if practical and it is safe to do so, make a lane change into a lane away from the emergency vehicle. If two or more vehicles arrive at an intersection at about the same time, If you arrive at an intersection at about the same time as vehicles from other directions, you must yield the right-of- way to the vehicle on the right.