Vivint Smart Home Pro Final Exam With Complete And Verified Solutions

Vivint Smart Home Pro Final Exam With Complete And Verified Solutions 12-24v - answerWhat is the input voltage range of the Doorbell Cam? 16.5 VAC - answerWhat is the output voltage of the transformer used to power the SkyControl panel? true - answerTrue or False: When programming a sensor into the sky panel you can type in the serial number or "learn" it in by triggering the device 2 - answerWhen programming a DW21, which loop number is used? 1 2 3 beans and wire caps - answerWhich of the following materials can you use to group multiple ground terminals in a takeover module: Solder String Wire Caps Duct Tape Beans True - answerT or F: When installing the firefighter, it is required to test the customer's existing smoke detectors 3/4" - answerWhen installing a DW21, what size bit should you use to drill the hole for the sensor? 1/2" 3/8" 3/4" 1" True - answerT or F: When installing the TAKE-345, you must ensure that the transformer is supplying power to the power supply before the battery. True - answerT or F: You are required to test signals from all secondary keypads and key fobs even though they are not detection devices False - answerT or F: When running power to the TAKE-345 polarity does not apply - answerWhat is the correct height at which to install the PIR2? 7 ft At least 5 ft At least 7 ft At 7.5 ft How would you program a CO3 if mounted on a hallway wall? Loop 1 Zone 8 Loop 1 Zone 14 Loop 3 Zone 4 Loop 1 Zone 4 - answer When installing a DW21 into a metal door frame, with a wooden door, what should you be sure to use? Metal Drill bit A DW11 should be used on all metal door frames 3/4" insulated magnet Eye goggles - answer True - answerT or F: Panic Pendants are programmed as an audible alarm T or F: The Firefighter may be installed next to a stand-alone battery-powered smoke detector - answer Which of the following zone/sensor types are correct when programming an SMKT3? Type 9 - Freeze Detect Type 7 - Freeze Detect Type 9 - Heat detect Type 6 - heat detect type 1 - heat detect type 8 - freeze detect type 5 - smoke detect type 7 - smoke detect type 9 - smoke detect - answer When installing a DW21 where is the appr