CTS PREP EXAM/126 QUESTIONS AND
ANSWERS
The HDTV aspect ratio is expressed as: - -1.78:1
-When conducting a site survey at an active construction site what should
you confirm FIRST before arriving onsite? - -Required PPE to be onsite.
-A field service technician replaces a piece of AV equipment on the client
LAN but notices it's not getting proper IP address. What's the most likely
issue? - -The new piece of equipment needs to have its MAC registered.
-After presenting a proposal to a client, confirming that all objections are
answered and that the final buying decision will be made at an internal
meeting, what is the next step? - -Communicate regularly, until a decision is
made
-During discussions with an Architect, a _________ may be most useful when
reviewing drawings. - -Scale
-The minimum load safety rating for mounting audio visual equipment
is:MAYBE - -5:1
-When installing an audiovisual system, a user connects a laptop to an HDMI
distribution amplifier with two monitors connected. The first monitor shows
the laptop screen without any difficulty, the second monitor does not. The
likely cause is - -EDID
-When surveying a room before the start of the job, which of the following is
NOT important? - -The color of the conference room walls
-A client requires a new boardroom. The sales person and engineer are sent
to the premises to survey the facility and discuss the opportunity with the
client. This process is best described as a ____ - -Needs Analysis
-A quick and accurate means to estimate dimensions of a commercial space
during a site inspection would be to _____? - -Count the number of ceiling
tiles in a drop tile installation
-What is NOT an example of typical safety equipment you'd have readily
available for a site visit? MAYBE - -NOT Tools with nonslip handles
-An installed audio system should be AT LEAST __________ above the ambient
noise floor. - -25 dB
, -A client requires a front projection system. What drawings should be
requested from the client to select the appropriate lens? - -reflected ceiling
plans and elevations
-Which of the following is NOT an objective of training end users and support
staff on the operation of an AV system. - -Eliminate the need for a service
contract
-In an auditorium, sightlines for the audience viewing a screen space can be
improved by: - -Providing staggered or stepped seating arrangements
-The Architect, Engineers and Consultants are all members of the _________. -
-Design Team
-After a site visit you realize you forgot to measure the room length. You did
measure the width as 35 feet and ceiling height as 8 feet. Knowing from
other documentation that the room's total area is 980 square feet, what
might the length be? - -28ft
-A customer reports that they can't log into the web controls of an AV
device. What is the FIRST thing that you should do?MAYBE - -NOT Tell the
customer to engage their corporate IT department
-A dimmer rack with a constant load capability is powering twenty-four
incandescent lights during a stage production. The dimmer rack is running
on a steady 230 VAC supply and averaging approximately 98 amps draw.
Suddenly the line voltage drops to 211 VAC. Calculate the expected
amperage draw. - -90 amps
-As part of integrating your solution your client indicates that they have
certain technologies enabled on their network that allows defined and
flagged traffic to reach its source destination based upon the priority of the
traffic. What does the client have enabled on their network? MAYBE - -NOT
Access Control Lists (ACLs)
-What does a Work Breakdown Structure (WBS) address? - -Products and
services as they relate to work done on a project
-A customer reports that, after a water leak in their conference room, the
projector won't turn on. What should the service technician do FIRST? - -
Inspect each system component for water damage
-An owner representative contests an invoice that was mailed after an
emergency service call which had determined the problem was "operator
error". Which of the following is *least* likely to prevent this type of
ANSWERS
The HDTV aspect ratio is expressed as: - -1.78:1
-When conducting a site survey at an active construction site what should
you confirm FIRST before arriving onsite? - -Required PPE to be onsite.
-A field service technician replaces a piece of AV equipment on the client
LAN but notices it's not getting proper IP address. What's the most likely
issue? - -The new piece of equipment needs to have its MAC registered.
-After presenting a proposal to a client, confirming that all objections are
answered and that the final buying decision will be made at an internal
meeting, what is the next step? - -Communicate regularly, until a decision is
made
-During discussions with an Architect, a _________ may be most useful when
reviewing drawings. - -Scale
-The minimum load safety rating for mounting audio visual equipment
is:MAYBE - -5:1
-When installing an audiovisual system, a user connects a laptop to an HDMI
distribution amplifier with two monitors connected. The first monitor shows
the laptop screen without any difficulty, the second monitor does not. The
likely cause is - -EDID
-When surveying a room before the start of the job, which of the following is
NOT important? - -The color of the conference room walls
-A client requires a new boardroom. The sales person and engineer are sent
to the premises to survey the facility and discuss the opportunity with the
client. This process is best described as a ____ - -Needs Analysis
-A quick and accurate means to estimate dimensions of a commercial space
during a site inspection would be to _____? - -Count the number of ceiling
tiles in a drop tile installation
-What is NOT an example of typical safety equipment you'd have readily
available for a site visit? MAYBE - -NOT Tools with nonslip handles
-An installed audio system should be AT LEAST __________ above the ambient
noise floor. - -25 dB
, -A client requires a front projection system. What drawings should be
requested from the client to select the appropriate lens? - -reflected ceiling
plans and elevations
-Which of the following is NOT an objective of training end users and support
staff on the operation of an AV system. - -Eliminate the need for a service
contract
-In an auditorium, sightlines for the audience viewing a screen space can be
improved by: - -Providing staggered or stepped seating arrangements
-The Architect, Engineers and Consultants are all members of the _________. -
-Design Team
-After a site visit you realize you forgot to measure the room length. You did
measure the width as 35 feet and ceiling height as 8 feet. Knowing from
other documentation that the room's total area is 980 square feet, what
might the length be? - -28ft
-A customer reports that they can't log into the web controls of an AV
device. What is the FIRST thing that you should do?MAYBE - -NOT Tell the
customer to engage their corporate IT department
-A dimmer rack with a constant load capability is powering twenty-four
incandescent lights during a stage production. The dimmer rack is running
on a steady 230 VAC supply and averaging approximately 98 amps draw.
Suddenly the line voltage drops to 211 VAC. Calculate the expected
amperage draw. - -90 amps
-As part of integrating your solution your client indicates that they have
certain technologies enabled on their network that allows defined and
flagged traffic to reach its source destination based upon the priority of the
traffic. What does the client have enabled on their network? MAYBE - -NOT
Access Control Lists (ACLs)
-What does a Work Breakdown Structure (WBS) address? - -Products and
services as they relate to work done on a project
-A customer reports that, after a water leak in their conference room, the
projector won't turn on. What should the service technician do FIRST? - -
Inspect each system component for water damage
-An owner representative contests an invoice that was mailed after an
emergency service call which had determined the problem was "operator
error". Which of the following is *least* likely to prevent this type of
