Spectrum Charter New Hire Final Pt.II Questions and Answers 100% Correct
Convert 2.2mV to V - ANSWER-.0022V
Try not to Amplify the: - ANSWER-Modem
Two things that can be used to reference while drilling - ANSWER-Doors and Windows
Why do we bond cable to common ground at electrical service entrance - ANSWER-
Prevent electrical hazards
Tag bond wire at bond ends if not visible form location - ANSWER-Bonding point, and Tap
Minimum Bond Wire Length - ANSWER-Bond Wire must not be smaller than 12 in
Purpose of Gromit at Tap Port - ANSWER-Protect from moisture and weathering
Purpose of a power inserter - ANSWER-Alternative way to power amplifier
Mobile home trailer beam clamp is used when: - ANSWER-No grounding available or it's more than 30ft away
Device used to complete the bonding process on a galvanized conduit - ANSWER-
Galvanized bonding strap
4 approved bonding solutions - ANSWER-Strap, IBT, Split bolt, and Power Clamp
Primary bonding solution - ANSWER-IBT
Wiring scenario sometimes called a loop system - ANSWER-Daisy chain
Lines from outlet to single location - ANSWER-Home run
What would be technicians responsibility during installation and there is damage - ANSWER-TV-check, Notifying customer, DOJ notate account, call supervisor
Conditions to leave Attic or not enter - ANSWER-Mold, Frayed lines, Critters, and evidence of critters (droppings)
Convert 2.2mV to V - ANSWER-.0022V
Try not to Amplify the: - ANSWER-Modem
Two things that can be used to reference while drilling - ANSWER-Doors and Windows
Why do we bond cable to common ground at electrical service entrance - ANSWER-
Prevent electrical hazards
Tag bond wire at bond ends if not visible form location - ANSWER-Bonding point, and Tap
Minimum Bond Wire Length - ANSWER-Bond Wire must not be smaller than 12 in
Purpose of Gromit at Tap Port - ANSWER-Protect from moisture and weathering
Purpose of a power inserter - ANSWER-Alternative way to power amplifier
Mobile home trailer beam clamp is used when: - ANSWER-No grounding available or it's more than 30ft away
Device used to complete the bonding process on a galvanized conduit - ANSWER-
Galvanized bonding strap
4 approved bonding solutions - ANSWER-Strap, IBT, Split bolt, and Power Clamp
Primary bonding solution - ANSWER-IBT
Wiring scenario sometimes called a loop system - ANSWER-Daisy chain
Lines from outlet to single location - ANSWER-Home run
What would be technicians responsibility during installation and there is damage - ANSWER-TV-check, Notifying customer, DOJ notate account, call supervisor
Conditions to leave Attic or not enter - ANSWER-Mold, Frayed lines, Critters, and evidence of critters (droppings)
