ASE B6 Test exam 2023 with 100% correct answers

What is the difference between a unitized frame and a uni-body? There is no difference. In a uni-body or unitized vehicle, the frame and body are incorporated into a single welded structure. Should exhaust damaged systems be welded and repaired, or replaced all together? Replaced. Exhaust gases contain poisonous carbon monoxide and leaks could create dangerous conditions for passengers. The "Inside Out" sequence refers to... Calculating Labor times SAI refers to... An angle in the suspension system - the steering axis inclination. This can be measured using wheel alignment equipment. Incorrect SAI contributes to poor handling. Using a tram gauge an appraiser can easily detect a ________ condition. "Sway". With a tram gauge, it is easy to take linear measurements, such as point-to-point measurements across the front cage of a car. Appraiser A says all brake fluid should be drained and replaced when replacing a caliper on the left front of a six-month old car. Appraiser B saya all that is required is refilling the brake fluid and bleeding the system. Who is right? A, B, Both A & B, Neither A or B? Appraiser B only. Although brake fluid does become contaminated with moisture over time, this is not likely on a 6 month old car. Clean up time in reference to salvage parts means to.... Remove the oil and grease from the parts. The painting is a separate billable expense. Appraiser A says storage charges are calculated per day at the prevailing market rate. Appraiser B says they are calculated at the shop's posted rate. Who is right? A, B, A & B, neither A or B? Appraiser B only. The shop in possession of the vehicle can charge whatever they want, although most insurance companies will only pay for charges that correspond to reasonable market prices. Appraiser A Says the factory E-coat corrosion protection must be replaced anytime it is damaged in a collision. Appraiser B says the E-coat must be restored to a level equivalent to that created at the factory. Who is right? A, B, A & B, neither A or B? Both A & B. The factory E-coat must always be replaced when damaged and it must be done to a level equivalent with the factory work. "Set up and measure" refers to what? The dollar allowance for the time a technician needs to mount a vehicle on a repair system to measure length, width from center-line and height from the datum plane.