NIMS MMS UPDATED 2026 EXAM SCRIPT QUESTIONS AND
ANSWERS GRADED A+
✔✔What feature of a thread is checked with a thread micrometer? - ✔✔pitch diameter
✔✔Dial bore gages are used to measure: - ✔✔holes
✔✔To indicate an angled surface & make that surface parallel to a surface plate, a
machinist uses: - ✔✔sine plate
✔✔What sizes of gage pins are needed for a dimension o 9/32 + or - 1/64 inches -
✔✔.297/.266
✔✔A measure of dispersion that uses the largest and smallest measurements of a
sampling is the: - ✔✔Range
✔✔What is the range of the following sampling: ( 0.345, 0.382, 0.353, 0.380, 0.377)? -
✔✔0.037
✔✔Which of the following is not found on an X-bar and R control chart? - ✔✔Capability
ratio
✔✔The acronym MSDS means: - ✔✔Material Safety Data Sheet
✔✔Which of the following colors is not found on an HMIS label? - ✔✔Green
✔✔The threshold limit value ( TLV) is defined as - ✔✔the safe limit of unprotected
exposure to a material
✔✔MSDS information on new chemicals and materials found in the workplace can be
reviewed at - ✔✔Right to Know seminars and classes Safety seminars
✔✔The acronym HMIS stands for: - ✔✔Hazardous Materials Information System
✔✔the acronym for the government agency that regulates safety is called... - ✔✔OSHA
✔✔Oily rags and wipes are stored in a red fireproof can with a lid to prevent - ✔✔fires
through spontaneous combustion
✔✔The first course of action to take if a material (solid) becomes lodged in the eye is to
- ✔✔pull the top lid over the bottom lid
ANSWERS GRADED A+
✔✔What feature of a thread is checked with a thread micrometer? - ✔✔pitch diameter
✔✔Dial bore gages are used to measure: - ✔✔holes
✔✔To indicate an angled surface & make that surface parallel to a surface plate, a
machinist uses: - ✔✔sine plate
✔✔What sizes of gage pins are needed for a dimension o 9/32 + or - 1/64 inches -
✔✔.297/.266
✔✔A measure of dispersion that uses the largest and smallest measurements of a
sampling is the: - ✔✔Range
✔✔What is the range of the following sampling: ( 0.345, 0.382, 0.353, 0.380, 0.377)? -
✔✔0.037
✔✔Which of the following is not found on an X-bar and R control chart? - ✔✔Capability
ratio
✔✔The acronym MSDS means: - ✔✔Material Safety Data Sheet
✔✔Which of the following colors is not found on an HMIS label? - ✔✔Green
✔✔The threshold limit value ( TLV) is defined as - ✔✔the safe limit of unprotected
exposure to a material
✔✔MSDS information on new chemicals and materials found in the workplace can be
reviewed at - ✔✔Right to Know seminars and classes Safety seminars
✔✔The acronym HMIS stands for: - ✔✔Hazardous Materials Information System
✔✔the acronym for the government agency that regulates safety is called... - ✔✔OSHA
✔✔Oily rags and wipes are stored in a red fireproof can with a lid to prevent - ✔✔fires
through spontaneous combustion
✔✔The first course of action to take if a material (solid) becomes lodged in the eye is to
- ✔✔pull the top lid over the bottom lid
