CM 2215 OSHA 510 Study Guide
Protect safety and health of America's workers - Answer-OSHA's mission is to
11(c) - Answer-The right of the worker to seek safety and health on the job site without fear of
punishment can be found in Section___ of the OSH Act
lower morale and increased training costs - Answer-Results of workplace injuries and illnesses may
include
specific industry - Answer-Horizontal standards apply when a condition is not covered by a ___ ___
standard
consistent - Answer-The purpose of OSHA directives, including Enforcement and Compliance Directives
(CPL), is to ensure ___ OSHA regulations
cited violation - Answer-OSHA requires that employers certify that abatement is complete for each ___
its workers - Answer-Creating employer failed to inform employees, other than ___, of damaged
guardrail would result in a "creating" employer receiving a citation under OSHA's multi-employer
citation policy for damaging a guardrail exposing all employees to a fall hazard.
opening, walk through/around, closing - Answer-In addition to the presentation of credentials, the
inspection process includes the ___ conference, the ___ inspection, and the ___ conference.
, partial - Answer-As a result of a work-related illness or injury, days the employee was only able to work a
___ shift would be classified as restricted work activity (not including the day the illness or injury began).
100 - Answer-In OSHA Record keeping, an incidence rate is the number of recordable injuries or illness
per ___ full-time workers.
following - Answer-Managers should be an example by knowing and ___ the rules employees are
expected to follow to demonstrate management leadership and commitment to safety and health
competent - Answer-The two main components of an employer's accident and prevention
responsibilities required by 1926.20(b) a safety and health program and jobsite inspections by a ___
person.
100 - Answer-The maximum travel distance from any point of the protected area to the nearest fire
extinguisher shall not exceed ___ feet
visible - Answer-Accident prevention signs such as; danger, caution, and exit signs shall be ___ when
work is being performed.
3.5 - Answer-When stopping a fall, a personal fall arrest system, shall bring an employee to a complete
stop and limit the maximum deceleration distance to ___ feet.
maintained - Answer-All hand and power tools, whether paid for by the employer or employee, shall be
___ in a safe condition.
qualified - Answer-A person who has a recognized degree, certificate, or professional standing or who
has demonstrated his/her ability to solve problems relating to specific work is a ___ person.
sheilded - Answer-Whenever practicable, all arc welding and cutting operations shall be ___ to protect
employees and other persons working in the vicinity
Protect safety and health of America's workers - Answer-OSHA's mission is to
11(c) - Answer-The right of the worker to seek safety and health on the job site without fear of
punishment can be found in Section___ of the OSH Act
lower morale and increased training costs - Answer-Results of workplace injuries and illnesses may
include
specific industry - Answer-Horizontal standards apply when a condition is not covered by a ___ ___
standard
consistent - Answer-The purpose of OSHA directives, including Enforcement and Compliance Directives
(CPL), is to ensure ___ OSHA regulations
cited violation - Answer-OSHA requires that employers certify that abatement is complete for each ___
its workers - Answer-Creating employer failed to inform employees, other than ___, of damaged
guardrail would result in a "creating" employer receiving a citation under OSHA's multi-employer
citation policy for damaging a guardrail exposing all employees to a fall hazard.
opening, walk through/around, closing - Answer-In addition to the presentation of credentials, the
inspection process includes the ___ conference, the ___ inspection, and the ___ conference.
, partial - Answer-As a result of a work-related illness or injury, days the employee was only able to work a
___ shift would be classified as restricted work activity (not including the day the illness or injury began).
100 - Answer-In OSHA Record keeping, an incidence rate is the number of recordable injuries or illness
per ___ full-time workers.
following - Answer-Managers should be an example by knowing and ___ the rules employees are
expected to follow to demonstrate management leadership and commitment to safety and health
competent - Answer-The two main components of an employer's accident and prevention
responsibilities required by 1926.20(b) a safety and health program and jobsite inspections by a ___
person.
100 - Answer-The maximum travel distance from any point of the protected area to the nearest fire
extinguisher shall not exceed ___ feet
visible - Answer-Accident prevention signs such as; danger, caution, and exit signs shall be ___ when
work is being performed.
3.5 - Answer-When stopping a fall, a personal fall arrest system, shall bring an employee to a complete
stop and limit the maximum deceleration distance to ___ feet.
maintained - Answer-All hand and power tools, whether paid for by the employer or employee, shall be
___ in a safe condition.
qualified - Answer-A person who has a recognized degree, certificate, or professional standing or who
has demonstrated his/her ability to solve problems relating to specific work is a ___ person.
sheilded - Answer-Whenever practicable, all arc welding and cutting operations shall be ___ to protect
employees and other persons working in the vicinity
