10/19/25, 2:00 PM OSHA 510 Exam
OSHA 510 Actual Exam Newest / OSHA 510 Exam
Preparation /OSHA 510 Practice Exam With Complete
180+ Questions And Correct Answers| Brand New
Version!
OSHA stands for Occupational Safety and Health Administration
1. fall
2. caught-in
OSHA's focus four injuries are: 3. struck by
4. electrical
OSHA's mission is to _____ and save lives and prevent injuries
_.
OSHA Form 301 is the _____ Injury and Illness Report
OSHA Form 300 is the Log of Work-Related Injuries and Illnesses
___________________ _.
OSHA Form 300A is the summary
annual ______________ of
Work-Related Injuries and
Illnesses.
Form 301 and 300 must be 7; receiving information that a recordable case has occurred.
filled out within
__ days of _.
The OSHA 300A must be February 1st to April 30th
certified by a company
executive and posted in a
prominent location from _.
All records must be 5
maintained for _____ years.
A PLHCP is _. physician or other licensed health care professional
/ 1/1
3
, 10/19/25, 2:00 PM OSHA 510 Exam
For a count of days on OSHA after; 180
forms, ALL
calendar days are counted
starting the day
_____ the injury takes place with a
cap of _____ days.
An injury or illness is an abnormal
________________ condition
or
disorder.
Dusts, fumes and mists are weight per unit of volume (mg/m^3)
measured in
Gasses and Vapors are volume of contaminant per volume of air sampled (ppm)
measured in
PEL Permissable Exposure Limits
TLV Threshold Limit Value
TLV-TWA Time Weighted Average and last for 8 hours/day or 40-hour week
TLV-STEL Short-Term Exposure Limit and lasts for few 15-minute time periods
TLV-C Ceiling value and should never be exceeded
The maximum travel 100 feet
distance for any point of the
protected area to the
nearest fire extinguisher
shall not exceed __
All hand and power tools, safe condition with proper storage and regular maintenance
whether paid for by the
employer or employee, shall
be in a
__
Whenever practicable, all arc shielded
welding and cutting
operations shall be __ to
protect
employees and other
persons working in the
vicinity.
Failure to inspect for oil or fire or explosion
grease on
regulator fittings, valves, or
/ 2/1
3
OSHA 510 Actual Exam Newest / OSHA 510 Exam
Preparation /OSHA 510 Practice Exam With Complete
180+ Questions And Correct Answers| Brand New
Version!
OSHA stands for Occupational Safety and Health Administration
1. fall
2. caught-in
OSHA's focus four injuries are: 3. struck by
4. electrical
OSHA's mission is to _____ and save lives and prevent injuries
_.
OSHA Form 301 is the _____ Injury and Illness Report
OSHA Form 300 is the Log of Work-Related Injuries and Illnesses
___________________ _.
OSHA Form 300A is the summary
annual ______________ of
Work-Related Injuries and
Illnesses.
Form 301 and 300 must be 7; receiving information that a recordable case has occurred.
filled out within
__ days of _.
The OSHA 300A must be February 1st to April 30th
certified by a company
executive and posted in a
prominent location from _.
All records must be 5
maintained for _____ years.
A PLHCP is _. physician or other licensed health care professional
/ 1/1
3
, 10/19/25, 2:00 PM OSHA 510 Exam
For a count of days on OSHA after; 180
forms, ALL
calendar days are counted
starting the day
_____ the injury takes place with a
cap of _____ days.
An injury or illness is an abnormal
________________ condition
or
disorder.
Dusts, fumes and mists are weight per unit of volume (mg/m^3)
measured in
Gasses and Vapors are volume of contaminant per volume of air sampled (ppm)
measured in
PEL Permissable Exposure Limits
TLV Threshold Limit Value
TLV-TWA Time Weighted Average and last for 8 hours/day or 40-hour week
TLV-STEL Short-Term Exposure Limit and lasts for few 15-minute time periods
TLV-C Ceiling value and should never be exceeded
The maximum travel 100 feet
distance for any point of the
protected area to the
nearest fire extinguisher
shall not exceed __
All hand and power tools, safe condition with proper storage and regular maintenance
whether paid for by the
employer or employee, shall
be in a
__
Whenever practicable, all arc shielded
welding and cutting
operations shall be __ to
protect
employees and other
persons working in the
vicinity.
Failure to inspect for oil or fire or explosion
grease on
regulator fittings, valves, or
/ 2/1
3
