CTS 2025 |438 questions with accurate answers
A medical center needs to install a display for diagnostic imagery, the
space should be designed according to which viewing category.
Ans✓✓✓ Analytical Decision Making
If an AV professional believes that an AV system requires its own
VLAN, what information must be communicated to the AV
professional's IT counterparts? Ans✓✓✓ Why the VLAN is necessary
Question: 100
In the OSI model, cabling and patchbays are elements of _____.
Response:
A. Layer 2, the Data Link layer
B. Layer 4, the Transport layer
C. Layer 1, the Physical layer
D. Layer 3, the Network layer Ans✓✓✓ Answer: C
Question: 101
How should the AV company respond if a client requests changes in the
project that end up increasing
the cost of completing the project?
Response:
,A. Ask the client to agree to a CO that describes the changes to the
project agreement and the
additional costs.
B. Perform the requested additional work to ensure that the client is
satisfied.
C. Never perform any work that was not agreed to within the original
work contract.
D. Remove another element of the project to keep the final cost the
same. Ans✓✓✓ Answer: A
Question: 102
Once approved, what does the AV concept design/program report
become the basis for?
Response:
A. Identifying required AV system components
B. Purchasing and installing the AV system components
C. Developing more detailed AV system design documents and cost
estimates
D. Additional discussions of AV needs Ans✓✓✓ Answer: C
Question: 103
,Which of the following is not a recommended approach to minimize
ambient light levels within a room?
Response:
A. Use lighter-colored finishes on walls
B. Use focused task lighting
C. Install lighting controls such as dimmers
D. Treat windows for light infiltration Ans✓✓✓ Answer: A
Question: 104
Which of the following cost descriptions provides a general budget for
the AV system for use within the
AV concept design/program report?
Response:
A. System quote
B. System estimate
C. Opinion of probable cost
D. System 'ballpark' Ans✓✓✓ Answer: C
Question: 105
Which of the following can interfere with an IR control?
Response:
A. Quality of the device
, B. Strength of the power source
C. Shadows and darkness
D. Bright sunshine or fluorescent lighting Ans✓✓✓ Answer: D
Question: 106
What should be the first step in troubleshooting a failure in an AV
system?
Response:
A. Determine the possible failure points
B. Determine which components are fully operational
C. Review a system diagram depicting interconnections and signal flow
D. Clearly identify the failure symptoms Ans✓✓✓ Answer: D
Question: 107
What is required to set an IP address manually on a network?
Response:
A. IP address and device name
B. Subnet mask and gateway
C. Subnet mask and DNS server
D. IP address and subnet mask Ans✓✓✓ Answer: D
A medical center needs to install a display for diagnostic imagery, the
space should be designed according to which viewing category.
Ans✓✓✓ Analytical Decision Making
If an AV professional believes that an AV system requires its own
VLAN, what information must be communicated to the AV
professional's IT counterparts? Ans✓✓✓ Why the VLAN is necessary
Question: 100
In the OSI model, cabling and patchbays are elements of _____.
Response:
A. Layer 2, the Data Link layer
B. Layer 4, the Transport layer
C. Layer 1, the Physical layer
D. Layer 3, the Network layer Ans✓✓✓ Answer: C
Question: 101
How should the AV company respond if a client requests changes in the
project that end up increasing
the cost of completing the project?
Response:
,A. Ask the client to agree to a CO that describes the changes to the
project agreement and the
additional costs.
B. Perform the requested additional work to ensure that the client is
satisfied.
C. Never perform any work that was not agreed to within the original
work contract.
D. Remove another element of the project to keep the final cost the
same. Ans✓✓✓ Answer: A
Question: 102
Once approved, what does the AV concept design/program report
become the basis for?
Response:
A. Identifying required AV system components
B. Purchasing and installing the AV system components
C. Developing more detailed AV system design documents and cost
estimates
D. Additional discussions of AV needs Ans✓✓✓ Answer: C
Question: 103
,Which of the following is not a recommended approach to minimize
ambient light levels within a room?
Response:
A. Use lighter-colored finishes on walls
B. Use focused task lighting
C. Install lighting controls such as dimmers
D. Treat windows for light infiltration Ans✓✓✓ Answer: A
Question: 104
Which of the following cost descriptions provides a general budget for
the AV system for use within the
AV concept design/program report?
Response:
A. System quote
B. System estimate
C. Opinion of probable cost
D. System 'ballpark' Ans✓✓✓ Answer: C
Question: 105
Which of the following can interfere with an IR control?
Response:
A. Quality of the device
, B. Strength of the power source
C. Shadows and darkness
D. Bright sunshine or fluorescent lighting Ans✓✓✓ Answer: D
Question: 106
What should be the first step in troubleshooting a failure in an AV
system?
Response:
A. Determine the possible failure points
B. Determine which components are fully operational
C. Review a system diagram depicting interconnections and signal flow
D. Clearly identify the failure symptoms Ans✓✓✓ Answer: D
Question: 107
What is required to set an IP address manually on a network?
Response:
A. IP address and device name
B. Subnet mask and gateway
C. Subnet mask and DNS server
D. IP address and subnet mask Ans✓✓✓ Answer: D
