F60 Fire Guard
A fire watch must be ________________________during any hot work operation -
ANS-maintained/be present
\A hot work program authorization is required for any project conducted on premises
involving hot work operations. Hot work program authorization is NOT issued by the
FDNY,
it must be signed and issued by the______________, and it must be available for
inspection by any representative of the Fire Department during the performance of
the
work, and for ________________ - ANS-responsible person（责任人）,
48 hours after the work is complete.
\A pre-hot work check must be conducted at least ____________ and must verify the
following:
1. The ______________ is in good working order.
2. The hot work area is clear of __________________.
(1) __________ rule for cutting or welding operation
(2) __________ rule for other hot work operation - ANS-once per day,
hot work equipment ,
combustibles and flammable solids,
35 feet ,
25 feet
\All permits are _______________, and any change in occupancy, operation,
tenancy or
ownership requires that_____________ - ANS-not transferable,
a new permit be issued.
\At least one portable fire extinguisher with a minimum _________________ rating
shall be provided and readily accessible within a ______________travel distance of
the location where hot work is performed and where the fire guards are positioned. -
ANS-2-A:20-B:C ,
30 feet
\Citywide permit
The quantity of hazardous materials being temporarily stored and used does not
exceed _______________, or ______________ of any other flammable liquid, and
__________of any combustible liquid. - ANS-5 gallons of gasoline,
250 gallons,
300gallons
\Citywide permit authorizes the permit holder to store, handle, use or sell hazardous
materials,
or conduct an operation on a _______________
, The duration of such activity at any individual location does not exceed
___________ and_________ Periods of activity - ANS-citywide basis,
30 calendar days,
all hazardous materials removed from the location at the end of the workday
\F-60 certificates of fitness fire guard is required - ANS-to perform the fire watch for
torch
operations at
(a) construction sites,
(b) on any rooftop,
(c) in any building or
structure, when the torch operation is conducted by a person holding a citywide
permit for torch operations
\Fire detection systems it should
_________________during hot work operation
___________ of the alarm is disabled, operator's __________ , and the
_____________ alarm is reenabled must notify to the central station, need to log
book each time u do this.
fire watch man, suffer ______________ must be provided when alarm is disabled -
ANS-disabled the fire alarm ,
date n time,
name n number,
date n time ,
any impariment/hurt
\FIRE GUARD - ANS-你好吗， 我过得不错哦
A person holding a Certificate of Fitness for such purposes, who is trained in
and responsible for maintaining a fire watch and performing such fire safety duties as
may
be prescribed by the commissioner.
\FIRE WATCH - ANS-(An Action) A temporary measure intended to ensure
continuous and systematic
surveillance of a building or portion thereof by 1+ qualified individuals for the
purposes of identifying and controlling fire hazards, detecting early signs of fire,
raising an
alarm of fire, and notifying the department.
\For any CNG or LPG torch operation, This is to make sure that there are no
smoldering fires in the building.
the first inspection shall be conducted _____________after completion of torch
operations;
the second inspection ________ after completion of torch operations. - ANS-30
minutes ，
1 hour
A fire watch must be ________________________during any hot work operation -
ANS-maintained/be present
\A hot work program authorization is required for any project conducted on premises
involving hot work operations. Hot work program authorization is NOT issued by the
FDNY,
it must be signed and issued by the______________, and it must be available for
inspection by any representative of the Fire Department during the performance of
the
work, and for ________________ - ANS-responsible person（责任人）,
48 hours after the work is complete.
\A pre-hot work check must be conducted at least ____________ and must verify the
following:
1. The ______________ is in good working order.
2. The hot work area is clear of __________________.
(1) __________ rule for cutting or welding operation
(2) __________ rule for other hot work operation - ANS-once per day,
hot work equipment ,
combustibles and flammable solids,
35 feet ,
25 feet
\All permits are _______________, and any change in occupancy, operation,
tenancy or
ownership requires that_____________ - ANS-not transferable,
a new permit be issued.
\At least one portable fire extinguisher with a minimum _________________ rating
shall be provided and readily accessible within a ______________travel distance of
the location where hot work is performed and where the fire guards are positioned. -
ANS-2-A:20-B:C ,
30 feet
\Citywide permit
The quantity of hazardous materials being temporarily stored and used does not
exceed _______________, or ______________ of any other flammable liquid, and
__________of any combustible liquid. - ANS-5 gallons of gasoline,
250 gallons,
300gallons
\Citywide permit authorizes the permit holder to store, handle, use or sell hazardous
materials,
or conduct an operation on a _______________
, The duration of such activity at any individual location does not exceed
___________ and_________ Periods of activity - ANS-citywide basis,
30 calendar days,
all hazardous materials removed from the location at the end of the workday
\F-60 certificates of fitness fire guard is required - ANS-to perform the fire watch for
torch
operations at
(a) construction sites,
(b) on any rooftop,
(c) in any building or
structure, when the torch operation is conducted by a person holding a citywide
permit for torch operations
\Fire detection systems it should
_________________during hot work operation
___________ of the alarm is disabled, operator's __________ , and the
_____________ alarm is reenabled must notify to the central station, need to log
book each time u do this.
fire watch man, suffer ______________ must be provided when alarm is disabled -
ANS-disabled the fire alarm ,
date n time,
name n number,
date n time ,
any impariment/hurt
\FIRE GUARD - ANS-你好吗， 我过得不错哦
A person holding a Certificate of Fitness for such purposes, who is trained in
and responsible for maintaining a fire watch and performing such fire safety duties as
may
be prescribed by the commissioner.
\FIRE WATCH - ANS-(An Action) A temporary measure intended to ensure
continuous and systematic
surveillance of a building or portion thereof by 1+ qualified individuals for the
purposes of identifying and controlling fire hazards, detecting early signs of fire,
raising an
alarm of fire, and notifying the department.
\For any CNG or LPG torch operation, This is to make sure that there are no
smoldering fires in the building.
the first inspection shall be conducted _____________after completion of torch
operations;
the second inspection ________ after completion of torch operations. - ANS-30
minutes ，
1 hour
