©THESTAR 2024/2025 ALL RIGHTS RESERVED 12:43 PM.
MSSC Quality Practices & Measurement
Exam Questions With Correct Answers
100% Verified.
Which type of feature is parallel to the surface being dimensioned? - Answer✔Dimension line
The three standard views of an object are __________. - Answer✔Top, front, right side
Which type of lines are used to show the counterbored hole in the part? - Answer✔Hidden lines
The number of views in a drawing __________. - Answer✔Is the fewest number that shows all
of the features and dimensions
Which of the following steps is NOT used in the glass box method? - Answer✔Rotate object in
glass box.
What type of drawing is shown? - Answer✔Multiview
The dimensions of raw material supplied by metal suppliers are described by the __________. -
Answer✔Stock size
Which of these requires a computer? - Answer✔CAD
An isometric drawing is a type of __________. - Answer✔Pictorial drawing
In the graphic shown, the two circles are __________. - Answer✔Concentric
Dimensions are used to specify the __________ and location of the features of an object. -
Answer✔Size
What feature in the figure shown is a Chamfer? - Answer✔D
A __________ dimension is described in inches per foot. - Answer✔Shaft taper
What is the order of precedence of lines in a drawing? - Answer✔Object, Hidden, Center
Which of the following is not one of the six rules for dimensioning an object? -
Answer✔Dimension hidden lines
1
, ©THESTAR 2024/2025 ALL RIGHTS RESERVED 12:43 PM.
Engineers sometimes use a __________ to measure angles on a drawing. - Answer✔Protractor
What dimension is indicated in this graphic? - Answer✔Height
There are 60 minutes of arc in one __________. - Answer✔Degree
In manufacturing, a blueprint is also called what? - Answer✔A technical drawing
The distance across the flats of the hex head shown in the part drawing is __________ inches. -
Answer✔2 ¼
The length of the part shown in the drawing is __________ inches. - Answer✔9 ¾
Which type best describes the line indicated in the graphic? - Answer✔Object Line
Which of the following bolts is a grade 2? - Answer✔A
The hole shown in the graphic is a __________ hole. - Answer✔Counterbore
What are the two types of assembly drawings? - Answer✔Exploded and basic
A sectional view __________. - Answer✔All of the above
Which of the following is not used to specify a threaded fastener? - Answer✔Minor diameter
Two types of threads are __________. - Answer✔Internal and external
In the assembly drawing shown, part 3 screws into part __________. - Answer✔4
The material that will be used to create the gear is indicated in the part drawing's title block to
be __________. - Answer✔Cast iron
In a threaded fastener assembly what is designed to protect the threads? - Answer✔Shank
Manufacturing workers can use a calibrated torque wrench to __________. - Answer✔Measure
the proper amount of torque
The part of a drawing that indicates that the drawing has the most up to date information on it
is __________. - Answer✔Drawing revision level
What type hole is shown in the figure? - Answer✔Counterbored
The minor diameter of a screw thread is measured at the __________. - Answer✔Root of screw
thread
Section lines in a sectional view are __________. - Answer✔All of the above
2
, ©THESTAR 2024/2025 ALL RIGHTS RESERVED 12:43 PM.
To establish on a drawing that 1/4 inch equals 1 inch, the designer would write __________. -
Answer✔1/4=1
Metals treated by __________ processes become soft. - Answer✔Annealing
Where would you look in a title block to see if there has been changes? - Answer✔Revision
number
Section lines on a blueprint indicate __________. - Answer✔A surface that has been cut
A screw with fine thread is represented on a drawing with what designation? - Answer✔UNF
What is the depth of the countersink in the image? - Answer✔0.12 inches
What is placed at the arrowheads of the cutting plane line to identify the cutting plane with the
proper sectional view? - Answer✔Capital letter
Assembly drawings rely on reference letters or numbers to __________. - Answer✔Identify the
individual parts
If a feature on a drawing is drawn 3 inches long and the scale is 1:4, what is the actual
dimension on the object? - Answer✔12"
The specifications for the length of produced parts is 5.146 inches with a tolerance of ± 0.005. Is
a part that has been produced at 5.140 inches out of spec? - Answer✔Yes, it is out of spec
Which dimension on a production drawing has the most accuracy? - Answer✔The one with the
most "tolerance" decimal places
A datum feature symbol can be connected to __________. - Answer✔Any of the above
The graphic shown is an example of __________ dimensioning. - Answer✔Baseline
If 4 percent of 1200 production pieces are out of spec, how many are out of spec? - Answer✔48
A part measuring 2.54 inches is out of spec if the specification is __________. - Answer✔2.00 ±
.53
A running fit is also called a(n) __________. - Answer✔Sliding fit
Form, profile, orientation, location and runout are shown by __________. - Answer✔GD&T
If a drawing shows a part with a diameter of 1.275 ± .003, what is the minimum and maximum
size allowed? - Answer✔1.272, 1.278
3
MSSC Quality Practices & Measurement
Exam Questions With Correct Answers
100% Verified.
Which type of feature is parallel to the surface being dimensioned? - Answer✔Dimension line
The three standard views of an object are __________. - Answer✔Top, front, right side
Which type of lines are used to show the counterbored hole in the part? - Answer✔Hidden lines
The number of views in a drawing __________. - Answer✔Is the fewest number that shows all
of the features and dimensions
Which of the following steps is NOT used in the glass box method? - Answer✔Rotate object in
glass box.
What type of drawing is shown? - Answer✔Multiview
The dimensions of raw material supplied by metal suppliers are described by the __________. -
Answer✔Stock size
Which of these requires a computer? - Answer✔CAD
An isometric drawing is a type of __________. - Answer✔Pictorial drawing
In the graphic shown, the two circles are __________. - Answer✔Concentric
Dimensions are used to specify the __________ and location of the features of an object. -
Answer✔Size
What feature in the figure shown is a Chamfer? - Answer✔D
A __________ dimension is described in inches per foot. - Answer✔Shaft taper
What is the order of precedence of lines in a drawing? - Answer✔Object, Hidden, Center
Which of the following is not one of the six rules for dimensioning an object? -
Answer✔Dimension hidden lines
1
, ©THESTAR 2024/2025 ALL RIGHTS RESERVED 12:43 PM.
Engineers sometimes use a __________ to measure angles on a drawing. - Answer✔Protractor
What dimension is indicated in this graphic? - Answer✔Height
There are 60 minutes of arc in one __________. - Answer✔Degree
In manufacturing, a blueprint is also called what? - Answer✔A technical drawing
The distance across the flats of the hex head shown in the part drawing is __________ inches. -
Answer✔2 ¼
The length of the part shown in the drawing is __________ inches. - Answer✔9 ¾
Which type best describes the line indicated in the graphic? - Answer✔Object Line
Which of the following bolts is a grade 2? - Answer✔A
The hole shown in the graphic is a __________ hole. - Answer✔Counterbore
What are the two types of assembly drawings? - Answer✔Exploded and basic
A sectional view __________. - Answer✔All of the above
Which of the following is not used to specify a threaded fastener? - Answer✔Minor diameter
Two types of threads are __________. - Answer✔Internal and external
In the assembly drawing shown, part 3 screws into part __________. - Answer✔4
The material that will be used to create the gear is indicated in the part drawing's title block to
be __________. - Answer✔Cast iron
In a threaded fastener assembly what is designed to protect the threads? - Answer✔Shank
Manufacturing workers can use a calibrated torque wrench to __________. - Answer✔Measure
the proper amount of torque
The part of a drawing that indicates that the drawing has the most up to date information on it
is __________. - Answer✔Drawing revision level
What type hole is shown in the figure? - Answer✔Counterbored
The minor diameter of a screw thread is measured at the __________. - Answer✔Root of screw
thread
Section lines in a sectional view are __________. - Answer✔All of the above
2
, ©THESTAR 2024/2025 ALL RIGHTS RESERVED 12:43 PM.
To establish on a drawing that 1/4 inch equals 1 inch, the designer would write __________. -
Answer✔1/4=1
Metals treated by __________ processes become soft. - Answer✔Annealing
Where would you look in a title block to see if there has been changes? - Answer✔Revision
number
Section lines on a blueprint indicate __________. - Answer✔A surface that has been cut
A screw with fine thread is represented on a drawing with what designation? - Answer✔UNF
What is the depth of the countersink in the image? - Answer✔0.12 inches
What is placed at the arrowheads of the cutting plane line to identify the cutting plane with the
proper sectional view? - Answer✔Capital letter
Assembly drawings rely on reference letters or numbers to __________. - Answer✔Identify the
individual parts
If a feature on a drawing is drawn 3 inches long and the scale is 1:4, what is the actual
dimension on the object? - Answer✔12"
The specifications for the length of produced parts is 5.146 inches with a tolerance of ± 0.005. Is
a part that has been produced at 5.140 inches out of spec? - Answer✔Yes, it is out of spec
Which dimension on a production drawing has the most accuracy? - Answer✔The one with the
most "tolerance" decimal places
A datum feature symbol can be connected to __________. - Answer✔Any of the above
The graphic shown is an example of __________ dimensioning. - Answer✔Baseline
If 4 percent of 1200 production pieces are out of spec, how many are out of spec? - Answer✔48
A part measuring 2.54 inches is out of spec if the specification is __________. - Answer✔2.00 ±
.53
A running fit is also called a(n) __________. - Answer✔Sliding fit
Form, profile, orientation, location and runout are shown by __________. - Answer✔GD&T
If a drawing shows a part with a diameter of 1.275 ± .003, what is the minimum and maximum
size allowed? - Answer✔1.272, 1.278
3
