auto mech. safety test with Questions and
100% Correct Answers
When using an air impact wrench, be sure to use an extra thick socket, called an
___ socket. - Answer Impact
Rubber tipped ___ work at. Air pressure dash work at a shop air pressure -
Answer Blow guns
Position - - - - as close to the grinding wheel as possible - Answer Rest
Stand in the - - when starting the grinder - Answer Side
When - - sheet metal or large pieces of metal on a drill press, make sure they are
clamped to the worktable - Answer Drilling
A - - it has a tendency to grab the work when it just begins to break through the
middle - Answer Drill
Do not __to someone who is operating a machine - Answer talk
compressed ___ can penetrate skin in must be used cautiously - Answer Air
Always use a ___ on the tang of a file - Answer Handel
, Always wear ___ protection when using hammers, chisels, pullers, batteries, air
conditioning machinery, compressed air and other hazardous situations - Answer
Eye
Mushroom punches or chisels should be _______ before use - Answer
Regrounded\dressed
Before opening a radiator test for pressure in the system by ___ the top radiator
hose - Answer Squeezing
Electric cooling fans should be ____ before working around them - Answer
Disconnected
Of the wiring for ground on commercial and household electrical wiring is ____. -
Answer Green
A HEPA vacume is a special vacume for ____ - Answer Asbestoes
If caustic liquid gets into your eyes flush with ___ especially under The eyelids -
Answer Water
The information sheet about a hazardous material is called a material safety ___
___ (msds) - Answer Data sheet
So not attempt to put out a gasoline fire with ___ - Answer Water
100% Correct Answers
When using an air impact wrench, be sure to use an extra thick socket, called an
___ socket. - Answer Impact
Rubber tipped ___ work at. Air pressure dash work at a shop air pressure -
Answer Blow guns
Position - - - - as close to the grinding wheel as possible - Answer Rest
Stand in the - - when starting the grinder - Answer Side
When - - sheet metal or large pieces of metal on a drill press, make sure they are
clamped to the worktable - Answer Drilling
A - - it has a tendency to grab the work when it just begins to break through the
middle - Answer Drill
Do not __to someone who is operating a machine - Answer talk
compressed ___ can penetrate skin in must be used cautiously - Answer Air
Always use a ___ on the tang of a file - Answer Handel
, Always wear ___ protection when using hammers, chisels, pullers, batteries, air
conditioning machinery, compressed air and other hazardous situations - Answer
Eye
Mushroom punches or chisels should be _______ before use - Answer
Regrounded\dressed
Before opening a radiator test for pressure in the system by ___ the top radiator
hose - Answer Squeezing
Electric cooling fans should be ____ before working around them - Answer
Disconnected
Of the wiring for ground on commercial and household electrical wiring is ____. -
Answer Green
A HEPA vacume is a special vacume for ____ - Answer Asbestoes
If caustic liquid gets into your eyes flush with ___ especially under The eyelids -
Answer Water
The information sheet about a hazardous material is called a material safety ___
___ (msds) - Answer Data sheet
So not attempt to put out a gasoline fire with ___ - Answer Water
