Hazmat Certification Practice Exam (100 Questions)

1


Hazmat Certification Practice Exam (100 Questions)

Section 1: Hazmat Awareness & First Responder Roles (Questions 1–20)

1. A reference book intended to be carried in every emergency vehicle in the United States
is the:
A. IFSTA First Responder Manual
B. NIOSH Handbook of Hazardous Materials
C. DOT Emergency Response Guidebook
D. NFPA Fire Protection Handbook


2. What is the primary role of a HAZMAT Awareness level responder?
A. To perform containment and mitigation operations
B. To lead the incident command structure
C. To recognize, isolate, and notify authorities of a hazardous materials incident
D. To conduct advanced decontamination procedures
Answer: C

3. Which U.S. federal agency is primarily responsible for regulating the transportation of
hazardous materials?
A. Environmental Protection Agency (EPA)
B. Occupational Safety and Health Administration (OSHA)
C. Department of Transportation (DOT)
D. Federal Emergency Management Agency (FEMA)
Answer: C

4. How many hazard classes are defined by the U.S. DOT for hazardous materials?
A. 7
B. 8
C. 9
D. 10
Answer: C

5. Which hazard class includes materials that may cause or enhance combustion of other
materials?
A. Class 3: Flammable Liquids
B. Class 4: Flammable Solids
C. Class 5: Oxidizers and Organic Peroxides
D. Class 8: Corrosives
Answer: C

6. What does a placard with a flame symbol on an orange or red background indicate?
A. Class 2: Non-flammable Gas

,2


B. Class 3: Flammable Liquid
C. Class 4: Flammable Solid
D. Class 9: Miscellaneous
Answer: B

7. Which document provides immediate guidance for first responders during the initial
phase of a hazardous materials incident?
A. Material Safety Data Sheet (MSDS)
B. Emergency Response Guidebook (ERG)
C. OSHA Hazard Communication Standard
D. EPA Risk Management Plan
Answer: B

8. What information is typically found in the yellow-bordered pages of the ERG?
A. Table of initial isolation and protective action distances
B. List of materials by name in alphabetical order
C. Guide numbers for specific hazardous materials
D. Index of materials by four-digit ID number
Answer: D

9. Which NFPA 704 diamond color represents health hazards?
A. Red
B. Blue
C. Yellow
D. White
Answer: B

10. What does the acronym "PEL" represent in occupational health and safety?
A. Permissible Exposure Limit
B. Primary Exposure Level
C. Protective Equipment Level
D. Personal Exposure Limit
Answer: A

11. The presence of a skull and crossbones symbol on a shipping label indicates:
A. Flammable hazard
B. Corrosive hazard
C. Toxic/Poison hazard
D. Radioactive hazard
Answer: C

12. What is the primary hazard of a Class 5.1 material?
A. Toxicity
B. Oxidation

, 3


C. Flammability
D. Radioactivity
Answer: B

13. What does the term "flash point" refer to?
A. The temperature at which a solid melts
B. The lowest temperature at which a liquid gives off enough vapor to ignite
C. The temperature at which a gas becomes flammable
D. The point at which an explosion occurs
Answer: B

14. What is the standard DOT hazard class for compressed gases?
A. Class 1
B. Class 2
C. Class 3
D. Class 4
Answer: B

15. An explosion hazard is indicated by which hazard class number?
A. 1
B. 2
C. 3
D. 5
Answer: A

16. Which of the following is a primary route of entry for hazardous materials into the
human body?
A. Inhalation
B. Ingestion
C. Absorption
D. All of the above
Answer: D

17. When responding to a HAZMAT incident, where should the Incident Command Post
(ICP) be established?
A. Downwind and uphill from the incident
B. Downwind and downhill from the incident
C. Upwind and uphill from the incident
D. Directly at the incident scene
Answer: C

18. What action should a First Responder Awareness individual take upon discovering a
HAZMAT spill?
A. Attempt to patch the leak to prevent further spillage