1
STATE FARM ESTIMATICS EXAM (TRUE/FALSE) - ACTUAL
EXAM 2026/2027 | EXPERT VERIFIED | MOST TESTED | 50
VERIFIED Q&A | COMPLETE RATIONALES | PASS
GUARANTEED - A+ GRADED
TRUE/FALSE QUESTION 1
Statement: A "square" in roofing terminology is equal to 100 square feet.
A. False
B. True
Rationale: A "square" is equal to 100 square feet (10 feet × 10 feet). This is the standard unit of measurement
used in roofing to quantify material quantities. Roofing materials are typically priced and ordered by the
square.
TRUE/FALSE QUESTION 2
Statement: The area of a triangle is calculated by multiplying the base by the height.
A. False
B. True
Rationale: The area of a triangle is calculated by multiplying 0.5 by the base by the height (A = 0.5 × B × H).
Multiplying the base by the height without multiplying by 0.5 would give the area of a rectangle, not a triangle.
TRUE/FALSE QUESTION 3
Statement: A 6/12 pitch roof rises 6 inches for every 12 inches of horizontal run.
A. False
B. True
Rationale: A 6/12 pitch means the roof rises 6 inches vertically for every 12 inches of horizontal run. This is
the standard way to express roof pitch. Higher numbers indicate steeper roofs.
TRUE/FALSE QUESTION 4
Statement: The multiplier for a 12/12 pitch roof is 1.118.
A. False
B. True
, 2
Rationale: The multiplier for a 12/12 pitch roof is 1.414, not 1.118. The multiplier is calculated using the
Pythagorean theorem: √(12² + 12²) ÷ 12 = √288 ÷ 12 = 16.97 ÷ 12 = 1.414. A 12/12 pitch is a 45° angle.
TRUE/FALSE QUESTION 5
Statement: On-center (OC) spacing is the distance from the center of one stud to the center of the next.
A. False
B. True
Rationale: On-center (OC) spacing is the distance from the center of one stud to the center of the next.
Standard OC spacing is 16 inches or 24 inches. This measurement is critical in framing estimates.
TRUE/FALSE QUESTION 6
Statement: Hip roofs have two sloping sides.
A. False
B. True
Rationale: Hip roofs have four sloping sides that meet at a ridge. Gable roofs have two sloping sides. Hip roofs
require more complex estimating because of the angled cuts and triangular sections.
TRUE/FALSE QUESTION 7
Statement: Gable roofs have four sloping sides.
A. False
B. True
Rationale: Gable roofs have two sloping sides that form a triangular gable at each end. Hip roofs have four
sloping sides. Gable roofs are simpler to estimate than hip roofs.
TRUE/FALSE QUESTION 8
Statement: The standard spacing for wall studs is 16 inches OC.
A. False
B. True
Rationale: The most common OC spacing for wall studs is 16 inches. This standard spacing is used in
residential construction. Some walls may be framed at 24 inches OC for non-load-bearing walls.
STATE FARM ESTIMATICS EXAM (TRUE/FALSE) - ACTUAL
EXAM 2026/2027 | EXPERT VERIFIED | MOST TESTED | 50
VERIFIED Q&A | COMPLETE RATIONALES | PASS
GUARANTEED - A+ GRADED
TRUE/FALSE QUESTION 1
Statement: A "square" in roofing terminology is equal to 100 square feet.
A. False
B. True
Rationale: A "square" is equal to 100 square feet (10 feet × 10 feet). This is the standard unit of measurement
used in roofing to quantify material quantities. Roofing materials are typically priced and ordered by the
square.
TRUE/FALSE QUESTION 2
Statement: The area of a triangle is calculated by multiplying the base by the height.
A. False
B. True
Rationale: The area of a triangle is calculated by multiplying 0.5 by the base by the height (A = 0.5 × B × H).
Multiplying the base by the height without multiplying by 0.5 would give the area of a rectangle, not a triangle.
TRUE/FALSE QUESTION 3
Statement: A 6/12 pitch roof rises 6 inches for every 12 inches of horizontal run.
A. False
B. True
Rationale: A 6/12 pitch means the roof rises 6 inches vertically for every 12 inches of horizontal run. This is
the standard way to express roof pitch. Higher numbers indicate steeper roofs.
TRUE/FALSE QUESTION 4
Statement: The multiplier for a 12/12 pitch roof is 1.118.
A. False
B. True
, 2
Rationale: The multiplier for a 12/12 pitch roof is 1.414, not 1.118. The multiplier is calculated using the
Pythagorean theorem: √(12² + 12²) ÷ 12 = √288 ÷ 12 = 16.97 ÷ 12 = 1.414. A 12/12 pitch is a 45° angle.
TRUE/FALSE QUESTION 5
Statement: On-center (OC) spacing is the distance from the center of one stud to the center of the next.
A. False
B. True
Rationale: On-center (OC) spacing is the distance from the center of one stud to the center of the next.
Standard OC spacing is 16 inches or 24 inches. This measurement is critical in framing estimates.
TRUE/FALSE QUESTION 6
Statement: Hip roofs have two sloping sides.
A. False
B. True
Rationale: Hip roofs have four sloping sides that meet at a ridge. Gable roofs have two sloping sides. Hip roofs
require more complex estimating because of the angled cuts and triangular sections.
TRUE/FALSE QUESTION 7
Statement: Gable roofs have four sloping sides.
A. False
B. True
Rationale: Gable roofs have two sloping sides that form a triangular gable at each end. Hip roofs have four
sloping sides. Gable roofs are simpler to estimate than hip roofs.
TRUE/FALSE QUESTION 8
Statement: The standard spacing for wall studs is 16 inches OC.
A. False
B. True
Rationale: The most common OC spacing for wall studs is 16 inches. This standard spacing is used in
residential construction. Some walls may be framed at 24 inches OC for non-load-bearing walls.
