PRO TOOLS 201 UPDATED EXAMS SCRIPT
QUESTIONS AND ANSWERS RATED A+
✔✔Where do you go to choose a Delay Compensation Setting? - ✔✔Playback Engine
✔✔To reverse the direction of the Scrub Trim tool, press which modifier key? -
✔✔Option
✔✔Which of the following are ways to change the destination drive for a track. A. Click
on the track's current Root Media Folder and select a destination from the pop-up menu
B. Select "Custom Allocation Options" and click the Change button C. Select "Use
round robin allocation for new tracks D. All of the above E. A and B only - ✔✔A. Click on
the track's current Root Media Folder and select a destination from the pop-up menu
✔✔Which of the following will simultaneously AutoMatch all parameters on all tracks? A.
Click the global AutoMatch button in the Automation window B. Command+Click (Mac)
or Ctrl+Click (windows) on the Automation Mode selector on any currently writing track.
C. Command+Click (Mac) or Ctrl+Click (windows) on a Write Enable button in the
Automation window. D. All of the above E. B and C only - ✔✔A. Click the global
AutoMatch button in the Automation window
✔✔To write a new breakpoint to the previous automation value using the Grabber tool,
press... - ✔✔Option+Command
✔✔What is a valid choice for the "After Write Pass, Switch to..." preference? A. Touch
B. Latch C. No change D. All of the above E. None of the above - ✔✔D. All of the above
✔✔Which of the following will scroll a track into view in both the Mix and Edit windows?
A. Right-click the track nameplate in either window and choose "Scroll into View" B.
Shift+Control-Click (Mac) or Shift+Start-Click (Windows) on the track nameplate in
either window C. Shift+Control-Click (Mac) or Shift+Start-Click (Windows) on the track
name in the Track list D. All of the above E. None of the above - ✔✔D. All of the above
, ✔✔The smart tool lets you access which of the following? A. Selector B. Grabber C.
Trim Tool D. Fades E. All of the above - ✔✔E. All of the above
✔✔Which of the following is true of tracks that use explicit voice assignments? A. The
tracks will always be heard in the mix (unless muted) B. The tracks' Voice selectors will
read "Dyn" C. Tracks that share the same voice will share Solo and muted status D.
Playback of tracks that share voices will depend on the track priority E. Each track must
be assigned a separate voice - ✔✔D. Playback of tracks that share voices will depend
on the track priority
✔✔Which of the following is not an Edit Window Scrolling option? A. Page B. Center
Playhead C. Continuous D. Forward and Back E. After Playback - ✔✔D. Forward and
Back
✔✔Where would you set the Current Engine for your session? - ✔✔Playback Engine
dialog box
✔✔To select the Scrub Trim tool, repeatedly press which key? - ✔✔F6
✔✔From which menu can you turn on/off Delay Compensation? - ✔✔Options
✔✔TRUE or FALSE. One or more HD accel cards can be added to a Pro Tools|HD
Native system to increase track count, add I/O capacity, and boost processing power. -
✔✔FALSE
✔✔?? DigiBase includes all of the following browsers, except: A. Workspace browser B.
Project C. Catalogs D. Volume E. File - ✔✔E. File
✔✔?? The following plug-in window shows what type of plug-in? A. A multi-mono TDM
B. A multi-channel TDM C. A multi-mono RTAS D. A multi-channel RTAS E. Insufficient
information to know for sure - ✔✔C. A multi-mono RTAS
✔✔Which of the following methods will deactivate a track? A. Right-click the track name
and choose "Make Inactive" from the pop-up menu. B. Select the track name and
choose "Make inactive" from the Track menu C. Command+Control-Click (Mac) or
Ctrl+Start-click (Windows) on the track type icon in the Mix window D. Click and hold the
track type icon and choose "Make Inactive" from the pop-up menu E. All of the Above -
✔✔E. All of the Above
✔✔?? Where would you configure the reference levels for individual analog inputs on
the HD OMNI? - ✔✔I/O Setup dialog box
QUESTIONS AND ANSWERS RATED A+
✔✔Where do you go to choose a Delay Compensation Setting? - ✔✔Playback Engine
✔✔To reverse the direction of the Scrub Trim tool, press which modifier key? -
✔✔Option
✔✔Which of the following are ways to change the destination drive for a track. A. Click
on the track's current Root Media Folder and select a destination from the pop-up menu
B. Select "Custom Allocation Options" and click the Change button C. Select "Use
round robin allocation for new tracks D. All of the above E. A and B only - ✔✔A. Click on
the track's current Root Media Folder and select a destination from the pop-up menu
✔✔Which of the following will simultaneously AutoMatch all parameters on all tracks? A.
Click the global AutoMatch button in the Automation window B. Command+Click (Mac)
or Ctrl+Click (windows) on the Automation Mode selector on any currently writing track.
C. Command+Click (Mac) or Ctrl+Click (windows) on a Write Enable button in the
Automation window. D. All of the above E. B and C only - ✔✔A. Click the global
AutoMatch button in the Automation window
✔✔To write a new breakpoint to the previous automation value using the Grabber tool,
press... - ✔✔Option+Command
✔✔What is a valid choice for the "After Write Pass, Switch to..." preference? A. Touch
B. Latch C. No change D. All of the above E. None of the above - ✔✔D. All of the above
✔✔Which of the following will scroll a track into view in both the Mix and Edit windows?
A. Right-click the track nameplate in either window and choose "Scroll into View" B.
Shift+Control-Click (Mac) or Shift+Start-Click (Windows) on the track nameplate in
either window C. Shift+Control-Click (Mac) or Shift+Start-Click (Windows) on the track
name in the Track list D. All of the above E. None of the above - ✔✔D. All of the above
, ✔✔The smart tool lets you access which of the following? A. Selector B. Grabber C.
Trim Tool D. Fades E. All of the above - ✔✔E. All of the above
✔✔Which of the following is true of tracks that use explicit voice assignments? A. The
tracks will always be heard in the mix (unless muted) B. The tracks' Voice selectors will
read "Dyn" C. Tracks that share the same voice will share Solo and muted status D.
Playback of tracks that share voices will depend on the track priority E. Each track must
be assigned a separate voice - ✔✔D. Playback of tracks that share voices will depend
on the track priority
✔✔Which of the following is not an Edit Window Scrolling option? A. Page B. Center
Playhead C. Continuous D. Forward and Back E. After Playback - ✔✔D. Forward and
Back
✔✔Where would you set the Current Engine for your session? - ✔✔Playback Engine
dialog box
✔✔To select the Scrub Trim tool, repeatedly press which key? - ✔✔F6
✔✔From which menu can you turn on/off Delay Compensation? - ✔✔Options
✔✔TRUE or FALSE. One or more HD accel cards can be added to a Pro Tools|HD
Native system to increase track count, add I/O capacity, and boost processing power. -
✔✔FALSE
✔✔?? DigiBase includes all of the following browsers, except: A. Workspace browser B.
Project C. Catalogs D. Volume E. File - ✔✔E. File
✔✔?? The following plug-in window shows what type of plug-in? A. A multi-mono TDM
B. A multi-channel TDM C. A multi-mono RTAS D. A multi-channel RTAS E. Insufficient
information to know for sure - ✔✔C. A multi-mono RTAS
✔✔Which of the following methods will deactivate a track? A. Right-click the track name
and choose "Make Inactive" from the pop-up menu. B. Select the track name and
choose "Make inactive" from the Track menu C. Command+Control-Click (Mac) or
Ctrl+Start-click (Windows) on the track type icon in the Mix window D. Click and hold the
track type icon and choose "Make Inactive" from the pop-up menu E. All of the Above -
✔✔E. All of the Above
✔✔?? Where would you configure the reference levels for individual analog inputs on
the HD OMNI? - ✔✔I/O Setup dialog box
