CONSTRUCTION SITE FIRE SAFETY
MANAGER RADIANT TEST QUESTIONS
WITH CORRECT ANSWERS | EXPERT
VERIFIED
1. Which of the following liquids must be bonded when transferred into
a container under normal conditions - ANSWER ✔ Class I liquids
2. It is best practice that the CSFSM inspects the standpipe system.
Which of the following statement is incorrect? - ANSWER ✔ The
OS&Y valve(s) shall be in the closed position and chained
3. Typically, the size of a fire extinguisher signage should be ______ -
ANSWER ✔ 10" x 7"
4. Who shall be called to request a flammable and combustible gas and
liquids permit inspection? - ANSWER ✔ District Office
5. A single storage location for flammable gas may not exceed ______
SCF - ANSWER ✔ 3500
, 6. The location of fire extinguishers shall be outlined in the ______ Plan
- ANSWER ✔ Site Specific Safety
7. It is best practice for all subcontractors to submit a/an
______verifying all tanks have been properly tested - ANSWER ✔
Affidavit
8. The construction site fire guard is required to walk arears of the job
site each hour from ______ and ______ following each day where hot
work operations were performed - ANSWER ✔ 1500, 2300
9. It is a best practice that any floor heater used in a shanty shall be
______ filled. - ANSWER ✔ Oil
10. All workers on site must receive Project Safety - Fire Prevention
Orientation. All workers should be retrained every ______ -
ANSWER ✔ 6 months
11. Each storage location for flammable gases shall not exceed 3,500
SCF in total storage. Each standard cylinder contains 300 SCF of
flammable gas. The maximum amount of cylinders you may store in
one storage location is - ANSWER ✔ 11
MANAGER RADIANT TEST QUESTIONS
WITH CORRECT ANSWERS | EXPERT
VERIFIED
1. Which of the following liquids must be bonded when transferred into
a container under normal conditions - ANSWER ✔ Class I liquids
2. It is best practice that the CSFSM inspects the standpipe system.
Which of the following statement is incorrect? - ANSWER ✔ The
OS&Y valve(s) shall be in the closed position and chained
3. Typically, the size of a fire extinguisher signage should be ______ -
ANSWER ✔ 10" x 7"
4. Who shall be called to request a flammable and combustible gas and
liquids permit inspection? - ANSWER ✔ District Office
5. A single storage location for flammable gas may not exceed ______
SCF - ANSWER ✔ 3500
, 6. The location of fire extinguishers shall be outlined in the ______ Plan
- ANSWER ✔ Site Specific Safety
7. It is best practice for all subcontractors to submit a/an
______verifying all tanks have been properly tested - ANSWER ✔
Affidavit
8. The construction site fire guard is required to walk arears of the job
site each hour from ______ and ______ following each day where hot
work operations were performed - ANSWER ✔ 1500, 2300
9. It is a best practice that any floor heater used in a shanty shall be
______ filled. - ANSWER ✔ Oil
10. All workers on site must receive Project Safety - Fire Prevention
Orientation. All workers should be retrained every ______ -
ANSWER ✔ 6 months
11. Each storage location for flammable gases shall not exceed 3,500
SCF in total storage. Each standard cylinder contains 300 SCF of
flammable gas. The maximum amount of cylinders you may store in
one storage location is - ANSWER ✔ 11
