Actual Exam (Testing Real Exam Questions) and
Verified Answers (100% Accurate) Get It Right
Save
Practice questions for this set
Learn 1 /7 Study with Learn
An employee is required to bypass a guard or other safety device during
maintenance/ danger zone exists when machinery is operating
Choose an answer
Gauges not accurate to within _______
1 What is a purpose of a control valve 2 percentage of the full scale shall be
recalibrated or replaced?
Name the system that utilizes a plate
Equipment should be locked out/
through which a passes a specific
3 4 tagged out when which of the
amount of foam concentrate at a
following conditions exist?
specific pressure.
, Don't know?
Terms in this set (50)
What is a purpose of a Control Flow to water based fire protection system
control valve
The gauge on the quick the same pressure
opening device shall
indicate _____ as compared
to the gauge on the
system side of the dry
pipe valve?
What type of test shall be Valve status test
provided when a valve is
returned to service to
determine that the valve is
open?
A pipe and its appurtenances on private property/
What is a fire service
Pipe between a source of water and the base of the
main?
system riser
Name the system that Orifice Plate Proportioning
utilizes a plate through
which a passes a specific
amount of foam
concentrate at a specific
pressure.
During an inspection, Corrosion
which of the following
would be identified as a
sprinkler which shall be
replaced?