ANSWERS!!
The smaller diameter cone of the NOMAD Pro 2, combined with the use of DC
power, and primary shielding greatly reduce a patient X-ray exposure. -
ANSWERTrue
X-ray locks in NOMAD Pro 2 automatically engage after 2 hours of inactivity. -
ANSWERFalse
Because NOMAD Pro 2 shielding limits the exposure, it is permissible to have other
people
in the exam room during exposures without any precautions. - ANSWERFalse
The NOMAD Pro 2 should be routinely cleaned using disinfectant wipes, or some
other non acetone cleaner to maintain cleanliness. - ANSWERTrue
The backscatter shield is adjustable to accommodate positioning devices and other
special needs but if the backscatter shield is adjusted, additional precautions are
required. - ANSWERTrue
If the NOMAD Pro 2 has been dropped, it should be returned to Aribex for an
evaluation. - ANSWERTrue
An exposure can be prematurely terminated for any reason by releasing the trigger
at any time during the exposure. - ANSWERTrue
The NOMAD Pro 2 should normally be held with two hands for stability whenever
possible. - ANSWERTrue
The Handset can be left on the Charging Cradle after reaching a full charge without
harming the batteries. - ANSWERTrue
The Handset should be detached from the NOMAD Pro 2 at the end of each day's
use. - ANSWERTrue
Do not ____ the NOMAD Pro 2 until the patient and film/ sensor are positioned and
ready to avoid unintended firing of the NOMAD Pro 2. - ANSWERENABLE / READY
When there is not enough battery charge left to take an exposure, the charge
indicator bars will fade away and the ____ alarm message appears on the screen,
and the NOMAD Pro 2 will not allow an exposure to begin. - ANSWERRECHARGE
HANDSET
If left unused NOMAD Pro 2 will automatically shut down after approximately
______________ minute(s). The NOMAD Pro 2 can also be turned off by pressing
the POWER button. - ANSWER3 minutes