1. What is a result of workplace Lower morale and increased costs
injuries and illnesses?
2. What is OSHA's mission? Protect safety and health of workers
3. What is 11(c) of the OSHA Act? Whistleblower protection
4. What is the difference between Horizontal standards generally apply to
a horizontal and vertical stan- all industries----vertical standards apply to
dard? specific industries---- if a condition is not
covered under a vertical standard, it may
revert back to the horizontal standard.
5. What is a CPL, STD or other Documents to clarify OSHA standards and
Directive? hopefully ensure consistent enforcement of
the standards.
6. What is OSHA'S multi-employ- On sites where more than one employer is
er policy? working, this policy address possible cita-
tions to employers who expose their em-
ployees to a hazard; create a hazard; have
control of a hazard; or have the ability to
correct a hazard.
7. What is "abatement"... must the Employer must abate (correct) all finalized
employer abate citations? citations.
8. What are the four parts to an Present credentials, opening conference,
OSHA inspection? walk-around, and closing conference.
9. For the 300 Log, if a worker Restricted
could only work a partial day...
what type of case is that?
10. What is an incidence rate? The number of recordable injuries and ill-
nesses per 100 full-time workers.
11. What are good examples of Lead by example; know and follow the
management leadership? rules; and provide resources for safety.
1/9
, 12. What is a proactive approach of Regular reviews of company policies and
identifying and correcting haz- procedures to make improvements.
ards in a workplace?
13. What is a floor hole? A gap or opening measuring 2 inches or
more.
14. As a general rule, fall pro- 4 feet
tection must be provided at
feet or more... in gener-
al industry workplaces?
15. When is a ladder safety system Fixed ladders requiring a climb of > 24 feet.
required on a fixed ladder?
16. In planning for emergency ex- The specific number of personnel... provide
its... what is an important con- an adequate number of exit routes.
sideration ?
17. When can an employer orally When they have 10 or fewer employees.
communicate the Emergency
Action Plan?
18. For Class A Fires, extinguish- 75 Feet
ers must be located within
feet of the employee?
19. What determine different cate- Flashpoint and boiling point
gories of flammable liquids?
20. What are the three basic means Devices, guards, and location.
of safeguarding machinery?
21. In machine guarding, what is Point where cutting, shaping, boring, or
meant by "point of operation? forming is accomplished.
22. What are common hazards as- Nip points and rotating parts.
sociated with conveyors?
23. Yes
2/9
injuries and illnesses?
2. What is OSHA's mission? Protect safety and health of workers
3. What is 11(c) of the OSHA Act? Whistleblower protection
4. What is the difference between Horizontal standards generally apply to
a horizontal and vertical stan- all industries----vertical standards apply to
dard? specific industries---- if a condition is not
covered under a vertical standard, it may
revert back to the horizontal standard.
5. What is a CPL, STD or other Documents to clarify OSHA standards and
Directive? hopefully ensure consistent enforcement of
the standards.
6. What is OSHA'S multi-employ- On sites where more than one employer is
er policy? working, this policy address possible cita-
tions to employers who expose their em-
ployees to a hazard; create a hazard; have
control of a hazard; or have the ability to
correct a hazard.
7. What is "abatement"... must the Employer must abate (correct) all finalized
employer abate citations? citations.
8. What are the four parts to an Present credentials, opening conference,
OSHA inspection? walk-around, and closing conference.
9. For the 300 Log, if a worker Restricted
could only work a partial day...
what type of case is that?
10. What is an incidence rate? The number of recordable injuries and ill-
nesses per 100 full-time workers.
11. What are good examples of Lead by example; know and follow the
management leadership? rules; and provide resources for safety.
1/9
, 12. What is a proactive approach of Regular reviews of company policies and
identifying and correcting haz- procedures to make improvements.
ards in a workplace?
13. What is a floor hole? A gap or opening measuring 2 inches or
more.
14. As a general rule, fall pro- 4 feet
tection must be provided at
feet or more... in gener-
al industry workplaces?
15. When is a ladder safety system Fixed ladders requiring a climb of > 24 feet.
required on a fixed ladder?
16. In planning for emergency ex- The specific number of personnel... provide
its... what is an important con- an adequate number of exit routes.
sideration ?
17. When can an employer orally When they have 10 or fewer employees.
communicate the Emergency
Action Plan?
18. For Class A Fires, extinguish- 75 Feet
ers must be located within
feet of the employee?
19. What determine different cate- Flashpoint and boiling point
gories of flammable liquids?
20. What are the three basic means Devices, guards, and location.
of safeguarding machinery?
21. In machine guarding, what is Point where cutting, shaping, boring, or
meant by "point of operation? forming is accomplished.
22. What are common hazards as- Nip points and rotating parts.
sociated with conveyors?
23. Yes
2/9
