Fire Apparatus Driver/Operator - Pumper
End of Course Exam Questions and
Answers Rated A+
What is the primary function of a pumper in a firefighting operation?
- A) To extinguish fires using foam
- B) To deliver water or foam to the fire scene for suppression purposes
- C) To transport personnel to the scene
✔✔ B) To deliver water or foam to the fire scene for suppression purposes
When should a pumper operator engage the pump?
- A) After the fire has been put out
- B) After the pumper has been properly positioned and a water supply is established
- C) Once all personnel have arrived at the scene
✔✔ B) After the pumper has been properly positioned and a water supply is established
What is the first action to take when arriving at a fire scene?
- A) Unload the fire hoses
- B) Secure a safe parking spot and establish a water supply
1
,- C) Begin firefighting operations immediately
✔✔ B) Secure a safe parking spot and establish a water supply
How should the pumper driver/operator ensure the safety of the crew during travel to the fire
scene?
- A) Speed up to reach the scene quickly
- B) Drive within the speed limits and use warning devices like sirens and lights
- C) Stop at every red light and wait for clearance
✔✔ B) Drive within the speed limits and use warning devices like sirens and lights
What is the purpose of the foam system on a pumper?
- A) To cool down the engine
- B) To apply foam to suppress fires involving flammable liquids or chemicals
- C) To generate additional pressure for water flow
✔✔ B) To apply foam to suppress fires involving flammable liquids or chemicals
How should a pumper operator manage water pressure when using multiple hoses?
- A) Maximize the pressure to increase water flow to all lines
2
,- B) Monitor and adjust pump pressure to ensure sufficient flow for all lines
- C) Shut off some lines to increase pressure for the others
✔✔ B) Monitor and adjust pump pressure to ensure sufficient flow for all lines
What is the purpose of the pressure relief valve on the pumper?
- A) To prevent water contamination
- B) To prevent over-pressurization of the system
- C) To increase water flow during a fire
✔✔ B) To prevent over-pressurization of the system
What should a pumper operator do if the pump starts to lose pressure?
- A) Increase the throttle to compensate
- B) Check for leaks in hoses or connections and adjust the pump pressure
- C) Continue operating the pump at full capacity
✔✔ B) Check for leaks in hoses or connections and adjust the pump pressure
How does a pumper operator improve water flow to the nozzle?
- A) By increasing the pump pressure to match the nozzle's requirements
3
, - B) By reducing the pressure on the pump to avoid damage
- C) By using a different type of nozzle
✔✔ A) By increasing the pump pressure to match the nozzle's requirements
What should the pumper operator do if the pumper’s engine begins to overheat?
- A) Continue operating at full throttle
- B) Stop the pump, allow the engine to cool, and check for mechanical issues
- C) Increase water flow to the pump
✔✔ B) Stop the pump, allow the engine to cool, and check for mechanical issues
What is the recommended procedure for engaging the pumper’s water tank-to-pump valve?
- A) Open the valve quickly to maintain pressure
- B) Ensure that the valve is opened slowly to prevent sudden pressure changes
- C) Keep the valve closed during the entire operation
✔✔ B) Ensure that the valve is opened slowly to prevent sudden pressure changes
How should the pumper operator handle traffic congestion when responding to a fire scene?
- A) Ignore traffic laws to arrive quickly
4
End of Course Exam Questions and
Answers Rated A+
What is the primary function of a pumper in a firefighting operation?
- A) To extinguish fires using foam
- B) To deliver water or foam to the fire scene for suppression purposes
- C) To transport personnel to the scene
✔✔ B) To deliver water or foam to the fire scene for suppression purposes
When should a pumper operator engage the pump?
- A) After the fire has been put out
- B) After the pumper has been properly positioned and a water supply is established
- C) Once all personnel have arrived at the scene
✔✔ B) After the pumper has been properly positioned and a water supply is established
What is the first action to take when arriving at a fire scene?
- A) Unload the fire hoses
- B) Secure a safe parking spot and establish a water supply
1
,- C) Begin firefighting operations immediately
✔✔ B) Secure a safe parking spot and establish a water supply
How should the pumper driver/operator ensure the safety of the crew during travel to the fire
scene?
- A) Speed up to reach the scene quickly
- B) Drive within the speed limits and use warning devices like sirens and lights
- C) Stop at every red light and wait for clearance
✔✔ B) Drive within the speed limits and use warning devices like sirens and lights
What is the purpose of the foam system on a pumper?
- A) To cool down the engine
- B) To apply foam to suppress fires involving flammable liquids or chemicals
- C) To generate additional pressure for water flow
✔✔ B) To apply foam to suppress fires involving flammable liquids or chemicals
How should a pumper operator manage water pressure when using multiple hoses?
- A) Maximize the pressure to increase water flow to all lines
2
,- B) Monitor and adjust pump pressure to ensure sufficient flow for all lines
- C) Shut off some lines to increase pressure for the others
✔✔ B) Monitor and adjust pump pressure to ensure sufficient flow for all lines
What is the purpose of the pressure relief valve on the pumper?
- A) To prevent water contamination
- B) To prevent over-pressurization of the system
- C) To increase water flow during a fire
✔✔ B) To prevent over-pressurization of the system
What should a pumper operator do if the pump starts to lose pressure?
- A) Increase the throttle to compensate
- B) Check for leaks in hoses or connections and adjust the pump pressure
- C) Continue operating the pump at full capacity
✔✔ B) Check for leaks in hoses or connections and adjust the pump pressure
How does a pumper operator improve water flow to the nozzle?
- A) By increasing the pump pressure to match the nozzle's requirements
3
, - B) By reducing the pressure on the pump to avoid damage
- C) By using a different type of nozzle
✔✔ A) By increasing the pump pressure to match the nozzle's requirements
What should the pumper operator do if the pumper’s engine begins to overheat?
- A) Continue operating at full throttle
- B) Stop the pump, allow the engine to cool, and check for mechanical issues
- C) Increase water flow to the pump
✔✔ B) Stop the pump, allow the engine to cool, and check for mechanical issues
What is the recommended procedure for engaging the pumper’s water tank-to-pump valve?
- A) Open the valve quickly to maintain pressure
- B) Ensure that the valve is opened slowly to prevent sudden pressure changes
- C) Keep the valve closed during the entire operation
✔✔ B) Ensure that the valve is opened slowly to prevent sudden pressure changes
How should the pumper operator handle traffic congestion when responding to a fire scene?
- A) Ignore traffic laws to arrive quickly
4
