Forklift OSHA Training Exam Questions With Verified Answers

Forklift OSHA Training Exam Questions With Verified Answers It is safe to give someone a ride on your lift truck. - answerFalse Lift trucks use a hydraulic cylinder attached to chains to raise and lower the forks. - answerTrue Wide and long loads are more unstable than other types of loads. - answerTrue Before loading or unloading a trailer at a loading dock, you should: - answer- Inspect the floor of the trailer to ensure that it will support the lift truck and the load. - Chock the wheels of the trailer. - Make sure that dock plates, boards, and ramps are in place and secure. A break pedal that sinks to the floor under continued pressure is in good operating condition. - answerFalse All industrial trucks (lift trucks) are equipped with a clutch. - answerFalse Of the three load positions illustrated above, which is the most stable? - answerTilted back The front wheels of a lift truck serve as the ___ between the weight of the truck and the weight of the load being carried. - answerFulcrum point In order to solve an "Inch Pound Equation", you must use information provided on a truck's data plate. - answerTrue The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift. - answerTrue You can place your hands and feet outside of the operator's compartment, as long as your head and body are protected. - answerFalse Always check the air pressure in tires from the side, not by facing the tread. - answerFalse The load capacity of a truck can be found on its data plate. - answerTrue Which of the following is NOT a type of lift truck? - answerAir-cooled Powered