Miter Saw Safety Test(question with correct answers)2023 passed

Miter Saw Safety Test(question with correct answers)2023 passedHow must the saw blade be held after the cut is finished and before the blade stops rotating? - correct answer Hold it in the down position. What special protection must be observed when using the motorized miter saw outside? - correct answer Connect the saw to a ground fault circuit interrupter (GFCI). How can the saw operator prevent the blade from binding when cutting warped, bowed, or long stock? - correct answer Clamp the stock to the table. When is it safe to remove wood scraps from the cutting zone on the motorized miter saw ? - correct answer While the saw is off and the hand is not on the Off / On switch. Where should the saw blade be positioned when cutting is completed and the operator is leaving the work zone? - correct answer In its safest position Hands or fingers never closer than ________ to the rotating blade when operating the motorized miter saw. - correct answer 6 inches What personal protection equipment should be worn by a motorized miter saw operator? - correct answer Hearing protection, eye protection, and a dust mask The purpose of a trial cut before making the actual cut with the motorized miter saw is to - correct answer see if the saw is cutting properly and is set accurately. Where should the saw blade be aligned when making a cut with the motorized miter saw ? - correct answer Waste side of the marking side