Masonry ICC study |71 questions| with correct answers
Control joints are considered joints that will ..... shortening, shrinkage and/or reduction in the length of the wall. A. Coordinate B. Accommodate C. Reduce D. Control CORRECT ANSWER Answer B. Accommodate A standard hook can be a 180° turn plus an extension of at least ..... bar diameters, but not less than ..... inches at the free end of the bar A. 4,2.25 B. 4,2.5 C. 2.2.75 D. 2,3 CORRECT ANSWER Answer B. 4bar diameters or 2.5 inches The cleanout opening at the bottom of a masonry wall is a minimum of ..... A. 3 inches in any direction B. 4 inches by 4 inches C. 32 inches D. 2 inches in any direction CORRECT ANSWER Answer A. 3" in any direction The minimum length of saw-cut prisms shall be ..... inches
Escuela, estudio y materia
- Institución
- Masonry ICC
- Grado
- Masonry ICC
Información del documento
- Subido en
- 27 de febrero de 2023
- Número de páginas
- 20
- Escrito en
- 2022/2023
- Tipo
- Examen
- Contiene
- Preguntas y respuestas
Temas
-
control joints are considered joints that will shortening
-
shrinkage andor reduction in the length of the wall a coordinate b accommodate c reduce d control correct answer answer b ac
Documento también disponible en un lote