FDNY
FDNY Fire Academy
Fire Quiz Quiz Practice Test WITH
Academy
Practice
CORRECT Test QUESTIONS AND 100% SOLVED
ANSWERS WITH 100% COMPLETE SOLUTION
1. How much does a full set of personal protective equipment weigh?
Forty pounds
Seventy-five pounds
Fifty pounds
Thirty pounds
2. What is the time duration for a PASS device to reach full alarm after
activation?
25 seconds
45 seconds
32 seconds
20 seconds
3. What is the actual strength of LSR as stated in the quiz?
150 ft length
6,000 lbs breaking strength
600 lbs working load
9,000 lbs actual strength
4. Describe the primary purpose of using an SCBA during firefighting
operations.
The primary purpose of using an SCBA is to protect firefighters
,from heat exposure.
The primary purpose of using an SCBA is to provide firefighters
with a supply of breathable air in hazardous environments.
, The primary purpose of using an SCBA is to allow firefighters to
communicate effectively.
The primary purpose of using an SCBA is to enhance visibility in
smoke-filled areas.
5. The Life Saving training rope is incorrectly described in which choice?
The maximum number of times the Life Saving training rope can be
used is 100 per end, for a total of 200 slides
One end of the Life Saving training rope shall be identified by tape
affixed to the hook
A history of every Life saving training rope shall be maintained on
the Training Rope Record Card (RP-101)
Life Saving training rope may be used at heights to a maximum of
four stories
6. Describe the significance of the working load limit in relation to LSR.
The working load limit is the length of the LSR.
The working load limit indicates the maximum load that LSR can
safely handle during use.
The working load limit is irrelevant to firefighting equipment.
The working load limit is the breaking strength of LSR.
7. Describe the implications of incorrectly resetting a Pak alert at full alarm in
a firefighting scenario.
Incorrectly resetting a Pak alert could lead to a failure in
communication and safety during an emergency.
Resetting a Pak alert is not critical to firefighting operations.
Resetting a Pak alert is only necessary during training.
A Pak alert can be reset without any consequences.
, 8. In a fire safety assessment, if a building is classified as Class 3, what specific
precautions should firefighters take when responding to a fire in that
structure?
Firefighters should focus on protecting adjacent buildings only.
Firefighters should avoid using water to suppress the fire.
Firefighters should prioritize rapid evacuation and use aggressive
fire suppression techniques due to the structure's non-fireproof
nature.
Firefighters can use standard procedures as the structure is
fireproof.
9. Which situation is classified as a Mayday in firefighting protocols?
Fear of collapse
Fire spreading
Water loss
Collapse occurred
10. Which is the type 3 classification of building construction?
non combustable construction
fire restive construction
ordinary construction
wood frame
11. What is the recommended location for flaking the hose when the hallway
becomes untenable?
Not above fire floor
Floor above
Roof
FDNY Fire Academy
Fire Quiz Quiz Practice Test WITH
Academy
Practice
CORRECT Test QUESTIONS AND 100% SOLVED
ANSWERS WITH 100% COMPLETE SOLUTION
1. How much does a full set of personal protective equipment weigh?
Forty pounds
Seventy-five pounds
Fifty pounds
Thirty pounds
2. What is the time duration for a PASS device to reach full alarm after
activation?
25 seconds
45 seconds
32 seconds
20 seconds
3. What is the actual strength of LSR as stated in the quiz?
150 ft length
6,000 lbs breaking strength
600 lbs working load
9,000 lbs actual strength
4. Describe the primary purpose of using an SCBA during firefighting
operations.
The primary purpose of using an SCBA is to protect firefighters
,from heat exposure.
The primary purpose of using an SCBA is to provide firefighters
with a supply of breathable air in hazardous environments.
, The primary purpose of using an SCBA is to allow firefighters to
communicate effectively.
The primary purpose of using an SCBA is to enhance visibility in
smoke-filled areas.
5. The Life Saving training rope is incorrectly described in which choice?
The maximum number of times the Life Saving training rope can be
used is 100 per end, for a total of 200 slides
One end of the Life Saving training rope shall be identified by tape
affixed to the hook
A history of every Life saving training rope shall be maintained on
the Training Rope Record Card (RP-101)
Life Saving training rope may be used at heights to a maximum of
four stories
6. Describe the significance of the working load limit in relation to LSR.
The working load limit is the length of the LSR.
The working load limit indicates the maximum load that LSR can
safely handle during use.
The working load limit is irrelevant to firefighting equipment.
The working load limit is the breaking strength of LSR.
7. Describe the implications of incorrectly resetting a Pak alert at full alarm in
a firefighting scenario.
Incorrectly resetting a Pak alert could lead to a failure in
communication and safety during an emergency.
Resetting a Pak alert is not critical to firefighting operations.
Resetting a Pak alert is only necessary during training.
A Pak alert can be reset without any consequences.
, 8. In a fire safety assessment, if a building is classified as Class 3, what specific
precautions should firefighters take when responding to a fire in that
structure?
Firefighters should focus on protecting adjacent buildings only.
Firefighters should avoid using water to suppress the fire.
Firefighters should prioritize rapid evacuation and use aggressive
fire suppression techniques due to the structure's non-fireproof
nature.
Firefighters can use standard procedures as the structure is
fireproof.
9. Which situation is classified as a Mayday in firefighting protocols?
Fear of collapse
Fire spreading
Water loss
Collapse occurred
10. Which is the type 3 classification of building construction?
non combustable construction
fire restive construction
ordinary construction
wood frame
11. What is the recommended location for flaking the hose when the hallway
becomes untenable?
Not above fire floor
Floor above
Roof
