Basic Corrosion Course for Operators
Exam Actual Questions and Answers
2026
Which of the following is NOT a component of a corrosion cell? -
correct answer ✅Paint
Which CPC publication provides a list of approved CICs for Army
Ground Equipment and instructions on how to apply them? -
correct answer ✅TB 43-0213
CIC application frequency depends on which of the following? -
correct answer ✅All of the above
According to ISO 9223:2012, which corrosivity classification is the
highest (representing the highest possible level of corrosion)? -
correct answer ✅CX
CARC coatings can be applied from which of the following? -
correct answer ✅All of the above
Which corrosion type occurs when two different types of metals are
in contact with each other in the presence of moisture? -
correct answer ✅Galvanic Corrosion
, Basic Corrosion Course for Operators
Exam Actual Questions and Answers
2026
True or False: Corrosion only occurs on metals. -
correct answer ✅false
Which of the following steps is NOT a part of the Mitigation via Spot
Painting process? -
correct answer ✅Welding
Which of the following is a COMMON type of corrosion on Army
Ground Equipment? -
correct answer ✅Crevice Corrosion
The following image is an example of which stage of corrosion? -
correct answer ✅Stage 4
Which of the following is the recommended cleaning method for
Operators by the TACOM CPC Program? -
correct answer ✅Fresh water rinsing using a pressure washer at or
below 1,200 psi
Exam Actual Questions and Answers
2026
Which of the following is NOT a component of a corrosion cell? -
correct answer ✅Paint
Which CPC publication provides a list of approved CICs for Army
Ground Equipment and instructions on how to apply them? -
correct answer ✅TB 43-0213
CIC application frequency depends on which of the following? -
correct answer ✅All of the above
According to ISO 9223:2012, which corrosivity classification is the
highest (representing the highest possible level of corrosion)? -
correct answer ✅CX
CARC coatings can be applied from which of the following? -
correct answer ✅All of the above
Which corrosion type occurs when two different types of metals are
in contact with each other in the presence of moisture? -
correct answer ✅Galvanic Corrosion
, Basic Corrosion Course for Operators
Exam Actual Questions and Answers
2026
True or False: Corrosion only occurs on metals. -
correct answer ✅false
Which of the following steps is NOT a part of the Mitigation via Spot
Painting process? -
correct answer ✅Welding
Which of the following is a COMMON type of corrosion on Army
Ground Equipment? -
correct answer ✅Crevice Corrosion
The following image is an example of which stage of corrosion? -
correct answer ✅Stage 4
Which of the following is the recommended cleaning method for
Operators by the TACOM CPC Program? -
correct answer ✅Fresh water rinsing using a pressure washer at or
below 1,200 psi
