Engineering Design Questions and Correct Answers

1



Engineering Design Questions and
Correct Answers

You do not need to wear eye protection when using a power drill.
Ans✅✅: False


At the end of each lab you should leave things where they are.
Ans✅✅: False


You should take off jewelry when using power tools.
Ans✅✅: True


You should tie back dangling long hair before operating power tools.
Ans✅✅: True


You may operate a power tool when others are standing nearby.
Ans✅✅: False


You cannot play run or throw objects in the lab.
Ans✅✅: True


You do not need to wash your hands after soldering.
Ans✅✅: False


You should keep your hands away from any spinning or rotating tools.
Ans✅✅: True


When you unplug a tool you should pull the electrical cord.
Pretest - Stuvia US

, 2


Ans✅✅: False


You should never leave a running machine unattended.
Ans✅✅: True


You can multitask by operating a power tool and doing something else at the
same time.
Ans✅✅: False


Only solder in a well-ventilated area.
Ans✅✅: True


Heat transfers rapidly through thin metals.
Ans✅✅: True


Do not use electric guns or irons while standing in wet areas.
Ans✅✅: True


Electricity can cause fires.
Ans✅✅: True


Battery chargers should be connected or disconnected only when the charger is
off and the caps are in place.
Ans✅✅: True


You do not need to take off rings or other jewelry while working with batteries.
Ans✅✅: False


Never apply resin paint or other finishing material near areas used for
soldering, or other hot work.


Pretest - Stuvia US