CHST EXAM TEST BANK 2025
QUESTIONS AND CORRECT
ANSWERS
A safety consultant needs to determine the total weight of petroleum diesel in
a 100,000-gallon cylindrical tank, using a density of 6.943 pounds per gallon
as provided in the safety data sheet.
What is the mass, in pounds, of the petroleum diesel when the tank is at full
capacity?
A) 694,000
B) 700,943
C) 700,694
D) 694,300
D) 694,300
Eye and face protection equipment used to protect against hazards shall meet
the requirements specified in:
a. ANSI Z87.1
b. ANSI Z89.1
c. ANSI Z41.1
d. ANSI Z244.1
,A) ANSI Z87.1
What methods should an employer employ to access the effectiveness of an
emergency response plan?
a. Regularly conduct disaster training.
b. Conduct drills or exercises.
c. Organize fire drills with a focus on speed and offer rewards for
winning employees.
d. Review historical company data on disaster-related fatalities and injuries.
B) Conduct drills and exercises
Your company is installing a new process that uses a chemical rinse that was
not previously used in the company. What should your first action be to
evaluate the health hazards.
a. Make sure the room has 6 air changes and hour
b. Order PPE before the work starts.
c. Conduct Air Sampling
d. Review the SDS.
D) Review the SDS
,When selecting proper gloves for chemical materials handling, it is important
to understand the chemical breakthrough rating for the type of chemical that
the employee may come into contact with. The chemical ratings are E, G, F,
and P.
What is the meaning of the "P" chemical breakthrough rating? Please select
one of the following options:
a. Poly-coated, highly recommended (breakthrough times greater than 8 hours)
b. Perforated, not designed for chemical exposure (breakthrough times less than
1 hour)
c. Performance, highly recommended (breakthrough times greater than 8 hours)
d. Poor, not recommended (breakthrough times less than 1 hour)
D) Poor, not recommended (breakthrough time less than 1 hour)
What is typically the primary focus of vulnerability assessments?
a. Terrorism
b. Waste Disposal
c. Earthquakes
d. Floods
A) Terrorism
Only employers with or fewer employees may communicate an
Emergency Action Plan orally to employees. 1910.38a
a. 10
b. 25
, c. 50
d. 100
A) 10
Under incident command, the command staff positions include:
A. Public Information Officer, Chief Executive Officer, Safety Officer
B. Safety Officer, Public Information Officer, And Liaison Officer,
C. Operations Section Chief, Logistics Section Chief, Planning Section
Chief, And Finance Section Chief
D. Planning, Operations, Support Officers
B) Safety Officer, Public Information Officer, and Liaison Officer
What formula should be used to calculate the free fall distance (FF) when the
anchor point is positioned above the harness attachment point?
A) FF = Lanyard
B) FF = Lanyard x Distance between attachment and anchor point
C) FF = Lanyard - Distance between attachment and anchor point
D) FF = Lanyard + Distance between attachment and anchor point
C) FF = Lanyard - Distance between attachment and anchor point
QUESTIONS AND CORRECT
ANSWERS
A safety consultant needs to determine the total weight of petroleum diesel in
a 100,000-gallon cylindrical tank, using a density of 6.943 pounds per gallon
as provided in the safety data sheet.
What is the mass, in pounds, of the petroleum diesel when the tank is at full
capacity?
A) 694,000
B) 700,943
C) 700,694
D) 694,300
D) 694,300
Eye and face protection equipment used to protect against hazards shall meet
the requirements specified in:
a. ANSI Z87.1
b. ANSI Z89.1
c. ANSI Z41.1
d. ANSI Z244.1
,A) ANSI Z87.1
What methods should an employer employ to access the effectiveness of an
emergency response plan?
a. Regularly conduct disaster training.
b. Conduct drills or exercises.
c. Organize fire drills with a focus on speed and offer rewards for
winning employees.
d. Review historical company data on disaster-related fatalities and injuries.
B) Conduct drills and exercises
Your company is installing a new process that uses a chemical rinse that was
not previously used in the company. What should your first action be to
evaluate the health hazards.
a. Make sure the room has 6 air changes and hour
b. Order PPE before the work starts.
c. Conduct Air Sampling
d. Review the SDS.
D) Review the SDS
,When selecting proper gloves for chemical materials handling, it is important
to understand the chemical breakthrough rating for the type of chemical that
the employee may come into contact with. The chemical ratings are E, G, F,
and P.
What is the meaning of the "P" chemical breakthrough rating? Please select
one of the following options:
a. Poly-coated, highly recommended (breakthrough times greater than 8 hours)
b. Perforated, not designed for chemical exposure (breakthrough times less than
1 hour)
c. Performance, highly recommended (breakthrough times greater than 8 hours)
d. Poor, not recommended (breakthrough times less than 1 hour)
D) Poor, not recommended (breakthrough time less than 1 hour)
What is typically the primary focus of vulnerability assessments?
a. Terrorism
b. Waste Disposal
c. Earthquakes
d. Floods
A) Terrorism
Only employers with or fewer employees may communicate an
Emergency Action Plan orally to employees. 1910.38a
a. 10
b. 25
, c. 50
d. 100
A) 10
Under incident command, the command staff positions include:
A. Public Information Officer, Chief Executive Officer, Safety Officer
B. Safety Officer, Public Information Officer, And Liaison Officer,
C. Operations Section Chief, Logistics Section Chief, Planning Section
Chief, And Finance Section Chief
D. Planning, Operations, Support Officers
B) Safety Officer, Public Information Officer, and Liaison Officer
What formula should be used to calculate the free fall distance (FF) when the
anchor point is positioned above the harness attachment point?
A) FF = Lanyard
B) FF = Lanyard x Distance between attachment and anchor point
C) FF = Lanyard - Distance between attachment and anchor point
D) FF = Lanyard + Distance between attachment and anchor point
C) FF = Lanyard - Distance between attachment and anchor point
