Prüfung

Test Bank for Mathematics for Machine Technology, 9th Edition by John C. Peterson

Bewertung

Verkauft

seiten

428

Klasse

A+

Hochgeladen auf

09-03-2025

geschrieben in

2024/2025

Test Bank for Mathematics for Machine Technology, 9e 9th Edition by John C. Peterson, Kathleen A. McGarry, Robert D. Smith. All Units (Unit 1 to 84) are included with answers. Section I: COMMON FRACTIONS AND DECIMAL FRACTIONS. 1. Introduction to Common Fractions and Mixed Numbers. 2. Addition of Common Fractions and Mixed Numbers. 3. Subtraction of Common Fractions and Mixed Numbers. 4. Multiplication of Common Fractions and Mixed Numbers. 5. Division of Common Fractions and Mixed Numbers. 6. Combined Operations of Common Fractions and Mixed Numbers. 7. Introduction to Decimal Fractions. 8. Rounding Decimal Fractions and Equivalent Decimal and Common Fractions. 9. Addition and Subtraction of Decimal Fractions. 10. Multiplication of Decimal Fractions. 11. Division of Decimal Fractions. 12. Powers. 13. Roots. 14. Table of Decimal Equivalents and Combined Operations of Decimal Fractions.. 15. Achievement Review Section One. Section II: RATIO, PROPORTION, AND PERCENTAGE. 16. Ratio and Proportion. 17. Direct and Inverse Proportions. 18. Introduction to Percents. 19. Basic Calculations of Percentages, Percents, and Rates. 20. Percent Practical Applications. 21. Achievement Review Section Two Section III: LINEAR MEASUREMENT: CUSTOMARY (ENGLISH) AND METRIC. 22. Customary (English) Units of Measure. 23. Metric Units of Linear Measure. 24. Degree of Precision and Greatest Possible Error, Absolute Error, and Relative Error. 25. Tolerance, Clearance, and Interference. 26. Customary and Metric Steel Rules. 27. Customary Vernier Calipers and Height Gages. 28. Metric Vernier Calipers and Height Gages. 29. Digital Calipers and Height Gages. 30. Customary Micrometers. 31. Metric Vernier Micrometers. 32. Digital Micrometers. 33. Customary and Metric Gage Blocks. 34. Achievement Review Section Three. Section IV: FUNDAMENTALS OF ALGEBRA. 35. Symbolism and Algebraic Expressions. 36. Signed Numbers. 37. Algebraic Operations of Addition, Subtraction, and Multiplication. 38. Algebraic Operations of Division, Powers, and Roots. 39. Introduction to Equations. 40. Solution of Equations by the Subtraction, Addition, and Division Principles of Equality. 41. Solution of Equations by the Multiplication, Root, and Power Principles of Equality. 42. Solution of Equations Consisting of Combined Operations and Rearrangement of Formulas. 43. Applications of Formulas to Cutting Speed, Revolutions Per Minute, and Cutting Time. 44. Applications of Formulas to Spur Gears. 45. Achievement Review Section FOUR. Section V: FUNDAMENTALS OF PLANE GEOMETRY. 46. Lines and Angular Measure. 47. Protractors- Simple Semicircular and Vernier. 48. Types of Angles and Angular Geometric Principles. 49. Introduction to Triangles. 50. Geometric Principles for Triangles and Other Common Polygons. 51. Introduction to Circles. 52. Arcs and Angles of Circles, Tangent Circles. 53. Fundamental Geometric Constructions. 54. Achievement Review Section Five. Section VI: GEOMETRIC FIGURES: AREAS AND VOLUMES. 55. Areas of Rectangles, Parallelograms, and Trapezoids. 56. Areas of Triangles. 57. Areas of Circles, Sectors, and Segments. 58. Volumes of Prisms and Cylinders. 59. Volumes of Pyramids and Cones. 60. Volumes of Spheres and Composite Solid Figures. 61. Achievement Review Section Six. Section VII: TRIGONOMETRY. 62. Introduction to Trigonometric Functions. 63. Analysis of Trigonometric Functions. 64. Basic Calculations of Angles and Sides of Right Triangles. 65. Simple Practical Machine Applications. 66. Complex Practical Machine Applications. 67. The Cartesian Coordinate System. 68. Oblique Triangles: Law of Sines and Law of Cosines. 69. Achievement Review Section Seven. Section VIII: COMPOUND ANGLES. 70. Introduction to Compound Angles. 71. Drilling and Boring Compound-Angular Holes: Computing Angles of Rotation and Tilt Using Given Lengths. 72. Drilling and Boring Compound-Angular Holes: Computing Angles of Rotation and Tilt Using Given Angles. 73. Machining Compound-Angular Surfaces: Computing Angles of Rotation and Tilt. 74. Computing Angles Made by the Intersection of Two Angular Surfaces. 75. Computing Compound Angles on Cutting and Forming Tools. 76. Achievement Review Section Eight. Section IX: COMPUTER NUMERICAL CONTROL: (CNC). 77. Introduction to Computer Numerical Control (CNC). 78. Control Systems, Absolute Positioning, Incremental Positioning. 79. Location of Points: Polar Coordinate System. 80. Binary Numeration System. 81. Hexadecimal Numeration System. 82. BCD (Binary Coded Decimal) Numeration Systems. 83. An Introduction to G- and M-Codes for CNC Programming 84. Achievement Review Section 9.

Mehr anzeigen Weniger lesen

Hochschule

Mathematics

Kurs

Mathematics

Ups! Dein Dokument kann gerade nicht geladen werden. Versuch es erneut oder kontaktiere den Support.

Urheberrechtsverletzung melden

Schule, Studium & Fach

Hochschule: Mathematics
Kurs: Mathematics

Dokument Information

Hochgeladen auf: 9. märz 2025
Anzahl der Seiten: 428
geschrieben in: 2024/2025
Typ: Prüfung
Enthält: Fragen & Antworten

Themen

mathematics
machine
technology
9th
edition
john
peterson
multiple choice
mcqs
question bank
quiz bank
9e
test bank

Inhaltsvorschau

UNIT 01 - Introduction to Common Fractions and Mixed Numbers
1. Reduce 40/8 to lowest terms.
a. 3
b. 4
c. 5
d. 6
ANSWER: c
POINTS: 1
REFERENCES: Fractional Parts
QUESTION TYPE: Multiple Choice
HAS VARIABLES: False
LEARNING OBJECTIVES: LO 1-1 - Express fractions in lowest terms.
KEYWORDS: Bloom's Taxonomy: Apply
DATE CREATED: 12/23/2024 1:42 AM
DATE MODIFIED: 1/10/2025 3:39 AM

2. Express 14/9 as a mixed number.
a. 1 5/9
b. 1 2/9
c. 1 4/9
d. 2 1/9
ANSWER: a
POINTS: 1
REFERENCES: Expressing Improper Fractions as Mixed Numbers
QUESTION TYPE: Multiple Choice
HAS VARIABLES: False
LEARNING OBJECTIVES: LO 1-4 - Express improper fractions as mixed numbers.
KEYWORDS: Bloom's Taxonomy: Apply
DATE CREATED: 12/23/2024 1:42 AM
DATE MODIFIED: 12/24/2024 1:40 AM

3. Which of the following is the improper fraction representation of the mixed number 3 2/5?
a. 15/5
b. 13/5
c. 17/5
d. 18/5
ANSWER: c
POINTS: 1
REFERENCES: Expressing Mixed Numbers as Improper Fractions
QUESTION TYPE: Multiple Choice
HAS VARIABLES: False
LEARNING OBJECTIVES: LO 1-3 - Express mixed numbers as improper fractions.
KEYWORDS: Bloom's Taxonomy: Understand

Page 1

,Name: Class: Date:

UNIT 01 - Introduction to Common Fractions and Mixed Numbers

DATE CREATED: 12/23/2024 1:43 AM
DATE MODIFIED: 12/24/2024 1:40 AM

4.

A welded support base is cut into four pieces as shown in the accompanying figure. What fractional part of the total length
does the first piece represent? All dimensions are in inches.
a. 1/6
b. 1/4
c. 1/3
d. 1/2
ANSWER: b
POINTS: 1
REFERENCES: Fractional Parts
QUESTION TYPE: Multiple Choice
HAS VARIABLES: False
LEARNING OBJECTIVES: LO 1-1 - Express fractions in lowest terms.
KEYWORDS: Bloom's Taxonomy: Apply
DATE CREATED: 12/23/2024 1:44 AM
DATE MODIFIED: 12/24/2024 1:40 AM

5. Reduce 45/10 to halves.
a. 3/2
b. 5/2
c. 7/2
d. 9/2
ANSWER: d
POINTS: 1
REFERENCES: Fractional Parts
QUESTION TYPE: Multiple Choice
HAS VARIABLES: False
LEARNING OBJECTIVES: LO 1-1 - Express fractions in lowest terms.
KEYWORDS: Bloom's Taxonomy: Apply
DATE CREATED: 12/23/2024 1:46 AM
DATE MODIFIED: 12/24/2024 1:40 AM
Page 2

,Name: Class: Date:

UNIT 01 - Introduction to Common Fractions and Mixed Numbers

6. What is the mixed number form of the improper fraction 22/7?
a. 3 1/7
b. 4 1/7
c. 3 2/7
d. 4 2/7
ANSWER: b
POINTS: 1
REFERENCES: Expressing Improper Fractions as Mixed Numbers
QUESTION TYPE: Multiple Choice
HAS VARIABLES: False
LEARNING OBJECTIVES: LO 1-4 - Express improper fractions as mixed numbers.
KEYWORDS: Bloom's Taxonomy: Understand
DATE CREATED: 12/23/2024 1:47 AM
DATE MODIFIED: 12/24/2024 1:40 AM

7. Express 4 1/3 as an improper fraction.
ANSWER: 4 1/3 = (4 x 3 + 1)/3 = 13/3
POINTS: 1
REFERENCES: Expressing Improper Fractions as Mixed Numbers
QUESTION TYPE: Subjective Short Answer
HAS VARIABLES: False
STUDENT ENTRY MODE: Basic
LEARNING OBJECTIVES: LO 1-4 - Express improper fractions as mixed numbers.
KEYWORDS: Bloom's Taxonomy: Apply
DATE CREATED: 12/23/2024 1:48 AM
DATE MODIFIED: 12/24/2024 1:40 AM

8. Express 3/8 as thirty-seconds.
a. 6/32
b. 8/32
c. 12/32
d. 16/32
ANSWER: c
POINTS: 1
REFERENCES: Expressing Fractions as Equivalent Fractions
QUESTION TYPE: Multiple Choice
HAS VARIABLES: False
LEARNING OBJECTIVES: LO 1-2 - Express fractions as equivalent fractions.
KEYWORDS: Bloom's Taxonomy: Apply
DATE CREATED: 12/23/2024 1:48 AM
DATE MODIFIED: 12/24/2024 1:40 AM

Page 3

, Name: Class: Date:

UNIT 01 - Introduction to Common Fractions and Mixed Numbers
9. What is the term for a number composed of a whole number and a fraction?
a. Improper fraction
b. Mixed number
c. Decimal
d. Divisor
ANSWER: b
POINTS: 1
REFERENCES: Expressing Mixed Numbers as Improper Fractions
QUESTION TYPE: Multiple Choice
HAS VARIABLES: False
LEARNING OBJECTIVES: LO 1-3 - Express mixed numbers as improper fractions.
KEYWORDS: Bloom's Taxonomy: Understand
DATE CREATED: 12/23/2024 1:48 AM
DATE MODIFIED: 12/24/2024 1:40 AM

10. Express 48/5 as a mixed number.
ANSWER: 48/5 = 48 ÷ 5 = 9 3/5
POINTS: 1
REFERENCES: Expressing Improper Fractions as Mixed Numbers
QUESTION TYPE: Subjective Short Answer
HAS VARIABLES: False
STUDENT ENTRY MODE: Basic
LEARNING OBJECTIVES: LO 1-4 - Express improper fractions as mixed numbers.
KEYWORDS: Bloom's Taxonomy: Apply
DATE CREATED: 12/23/2024 1:49 AM
DATE MODIFIED: 12/24/2024 1:40 AM

Page 4

25,89 €

Vollständigen Zugriff auf das Dokument erhalten:

100% Zufriedenheitsgarantie

Sofort verfügbar nach Zahlung

Sowohl online als auch als PDF

Du bist an nichts gebunden

Lerne den Verkäufer kennen

Tutor247

4,1

(745)

Lerne den Verkäufer kennen

Tutor247 Boston University

Profil betrachten

Folgen

Verkauft

6062

Mitglied seit

3 Jahren

Anzahl der Follower

3560

Dokumente

1120

Zuletzt verkauft

1 Jahren vor

Tutor 24/7

Providing best and accurate study guidance to students since 2011. Swift response to our students 24/7 and Seven days a week. At your service :)

4,1

745 rezensionen

447

124

Kürzlich von dir angesehen.

Warum sich Studierende für Stuvia entscheiden

on Mitstudent*innen erstellt, durch Bewertungen verifiziert

Geschrieben von Student*innen, die bestanden haben und bewertet von anderen, die diese Studiendokumente verwendet haben.

Nicht zufrieden? Wähle ein anderes Dokument

Kein Problem! Du kannst direkt ein anderes Dokument wählen, das besser zu dem passt, was du suchst.

Bezahle wie du möchtest, fange sofort an zu lernen

Kein Abonnement, keine Verpflichtungen. Bezahle wie gewohnt per Kreditkarte oder Sofort und lade dein PDF-Dokument sofort herunter.

“Gekauft, heruntergeladen und bestanden. So einfach kann es sein.”

Alisha Student

Häufig gestellte Fragen

Was bekomme ich, wenn ich dieses Dokument kaufe?

Du erhältst eine PDF-Datei, die sofort nach dem Kauf verfügbar ist. Das gekaufte Dokument ist jederzeit, überall und unbegrenzt über dein Profil zugänglich.

Zufriedenheitsgarantie: Wie funktioniert das?

Unsere Zufriedenheitsgarantie sorgt dafür, dass du immer eine Lernunterlage findest, die zu dir passt. Du füllst ein Formular aus und unser Kundendienstteam kümmert sich um den Rest.

Wem kaufe ich diese Zusammenfassung ab?

Stuvia ist ein Marktplatz, du kaufst dieses Dokument also nicht von uns, sondern vom Verkäufer Tutor247. Stuvia erleichtert die Zahlung an den Verkäufer.

Werde ich an ein Abonnement gebunden sein?

Nein, du kaufst diese Zusammenfassung nur für 25,89 €. Du bist nach deinem Kauf an nichts gebunden.

Kann man Stuvia trauen?

4.6 Sterne auf Google & Trustpilot (+1000 reviews) 45.681 Zusammenfassungen wurden in den letzten 30 Tagen verkauft Gegründet 2010, seit 16 Jahren die erste Adresse für Zusammenfassungen