PA state inspection categories Test with Complete Solutions
PA state inspection categories Test with Complete Solutions How should Suspension components be maintained? - Answer-every suspension component shall be in safe operating condition how should steering components be maintained? - Answer-the steering component should be in safe operating conditions the steering wheel shall have a minimum outside diameter of ?? - Answer-13 inches a passenger car manufactured after June 30, 1967 and designated as a 1968 or later model shall be equipped with what? - Answer-service brake system with rupture failure design that doesn't not result in complete brake loss brake lines shall be approved for use as - Answer-brake lines what shall a vehicle specified in this chapter be equipped with? - Answer-parking brake what should a parking brake be adequate to hold the vehicle on? - Answer-ice or snow on a 20% grade a radial ply tire shall not be used on? - Answer-the same axle as a belted or bias tire different types of tires - Answer-different types of tires shall not be used on the same axle unless in the event of an emergency Non-Pneumatic tires - Answer-only if originally equipped by the manufacturer and or an antique vehicle ice grips or studs - Answer-may not be equipped if they have projections greater than 2/32nds tires and rims - Answer-must meet or beat manufacturer specs spacers can be no thicker than - Answer-1/4 inch what head lamp system should your vehicle be equipped with - Answer-two or four head lamp system low beam candle watts must be brighter than? - Answer-7500
Schule, Studium & Fach
- Hochschule
- PA state inspection
- Kurs
- PA state inspection
Dokument Information
- Hochgeladen auf
- 30. märz 2024
- Anzahl der Seiten
- 4
- geschrieben in
- 2023/2024
- Typ
- Prüfung
- Enthält
- Fragen & Antworten
Themen
-
pa state inspection
-
pa state inspection categories
-
pa state inspection categories test