TOPGRADE

Crane Safety Practice Test Questions 2024. A crane can lift its maximum rated weight when: - correct answer the boom is at it minimum length and minimum radius What must be done to protect workers from a crane's swing radius? - correct answer barricade the crane's swing radius Which of the following is not a major cause of crane accidents? - correct answer lack of fuel A crane must maintain a minimum of ________feet from a live 50 kV power line during hoisting operations. - correct a...

Crane Signal Person Training Set One Correctly Answered Exam 2024. During all crane movements, Asme B30.5 states that communication shall be maintained : - correct answer Continuously OSHA's standard method hand signals would be located in : - correct answer OSHA 1926.1400 Appendix A According to ASME B30.5 where must a hand signal chart be posted? - correct answer Posted conspicuously When using voice signals according to ASME B30.5, who must be present for the Pre-lift discussion? -...

Crane Written Exam 2024. Which of the following OSHA regulations govern suspended personnel platforms? - correct answer OSHA According to ASME B30.3, the prohibited zone for power lines that are 60 kV is? - correct answer 15 ft. According to ASME B30.3, load hoist rotation resistant wire rope has a design factor of: - correct answer 5 to 1 According to ASME B30.3, when lifting a suspended personnel platform the design factor for the rigging hardware is: - correct answer 5 to 1 Acco...

Crane Study Guide Test factors that determine crane capacity - correct answer 1. weight of crane 2. strength of components 3. stability 6x25 wire rope is what class wire rope? - correct answer 6 x 19 List 4 causes of bird caging - correct answer 1. Sudden release of tension 2. Sheaves too tight 3. Torsional unbalance 4. Shock loading What is the % efficiency of a Flemish eye? - correct answer 90% What is duty cycle? - correct answer Performing a duty with a crane that is const...

General Crane Safety Written Exam 2024. The minimum crane team for a mobile crane on outriggers would consist of- A) The Crane Operator, Rigger Supervisor, and Crane Rigger B) The Crane Operator, Crane Supervisor, Rigger Supervisor, and Crane Rigger C) The Crane Operator, Crane Supervisor, and Crane Rigger D) The Crane Operator and Rigger-in-Charge E) The Crane Operator, Crane Walker, and Crane Rigger - correct answer C) The Crane Operator, Crane Supervisor, and Crane Rigger When ope...

General Crane Safety Practice Test Questions And Answers 2024. The minimum crane team for a mobile crane on outriggers would consist of- A) The Crane Operator, Rigger Supervisor, and Crane Rigger B) The Crane Operator, Crane Supervisor, Rigger Supervisor, and Crane Rigger C) The Crane Operator, Crane Supervisor, and Crane Rigger D) The Crane Operator and Rigger-in-Charge E) The Crane Operator, Crane Walker, and Crane Rigger - correct answer C) The Crane Operator, Crane Supervisor, and Cra...

General Crane Safety Review Exam Questions 2024.The minimum crane team for a mobile crane on outriggers would consist of- A) The Crane Operator, Rigger Supervisor, and Crane Rigger B) The Crane Operator, Crane Supervisor, Rigger Supervisor, and Crane Rigger C) The Crane Operator, Crane Supervisor, and Crane Rigger D) The Crane Operator and Rigger-in-Charge E) The Crane Operator, Crane Walker, and Crane Rigger - correct answer C) The Crane Operator, Crane Supervisor, and Crane Rigger Whe...

Hoisting Safety Ch. 1 Review Practice Questions 2024. Cranes are used for what in the construction industry? - correct answer The offloading of construction materials from delivery vehicles, to transport materials around a jobsite for fabrication or processing, and set finished components in place. The largest types of cranes are typically used for which industry? - correct answer Construction Can separate training and/or certification be required for each job for rigging, hoisting and si...

Mobile Crane Safety Prep Exam Questions 2024.Unless the manufacturers state otherwise, truck cranes generally have no lifting capacity over which area ? - correct answer The front Working radius is defined as the distance from the : - correct answer Center of Rotation of the crane to the center of gravity of the load. If a bold line is shown on a load chart, the capacities below the line : - correct answer Are based on the stability of the crane Rough terrain crane capacities are genera...

MSSC - Safety Certification Advanced Test Questions 2024. What are the fourteen Subindustries of Manufacturing - correct answer Chemicals Computers & Electronic Products Electrical Equipment & Appliances Food & Beverage Furniture Machinery Nonmetallic Minerals Petroleum & Coal Products Plastics & Rubber Production Primary and Fabricated Metals Printing Textile, Textile Products, Apparel & Leather Transportation Equipment Wood & Paper Moving and storage of materials is the conce...

NAVFAC P-307 Final Exam Questions And Answers 2024. The basic operational and rigging safety requirements for CAT 3 crane operations are identified in the...... - correct answer NAVFAC P-307 The purpose of the NAVFAC P-307 is to... - correct answer Ensure optimum service life Maintain safety and reliability Ensure safe crane and rigging operations Provide standards for crane operations and rigging Training can be found in Section 14 of the NAVFAC P-307. - correct answer False NAVFAC...

OSHA 30 - Cranes Exam Questions Correctly Answered 2024. Definition of a crane? - correct answer Hoise, lower, and horizontally move a suspended load 3 crane functions? - correct answer - Mobile - Tower - Overhead/gantry

OSHA 30 Crane Safety Mobile Cranes- Construction Cleanup Study Guide Exam 2024. Which of the following images is a wheel-mounted crane? - correct answer image 2 While mechanical failure results in some accidents, ___ is the most common cause of crane and hoist accidents? - correct answer Human error The majority of deaths that occur are not the crane operator, but other workers in the area. The leading cause of these deaths is electrocution form contact with _____. - correct answer Power ...

Osha 30 Crane safety Final Exam Prep Questions & Answers ards for crane safety can be found in - correct answer a. 29 cfr 19 subpart cc which of the following is an employer requirement - correct answer d. all of the above you must assure your crane is stable by each except - correct answer b on-board seismograph load charts must - correct answer b. indicate rated lifting capacity ad be visible to operator an annual inspection of each crane is - correct answer d all of the above c...

OSHA 30- Crane Safety Practice Test 2024. Which two cranes typically use a lattice boom? - correct answer Truck mounted, crawler Lattice sections cannot be added or removed on truck mounted boom cranes - correct answer False Tag lines are quite hard to put into place - correct answer False Standards for crane safety can be found in - correct answer 29 CFR An annual inspection of each crane: - correct answer Is required by OSHA. Must be documented. Is typically kept with the crane ...

OSHA 30 Overhead Crane Safety - Rigging Selection And Use Review Practice Questions 2024.Match the left to the right: - correct answer Load Movement - Causes an increased force, as much as three times the normal load force, due to dynamic loading Tying knots - May reduce the capacity of the sling by up to eighty percent. Unbalanced load - Can create a greater force on the sling than the actual weight of the load itself. Which of the following can have a negative impact on a sling and affect...

OSHA 30 Overhead Crane Safety - Safe Crane Operation Correctly Answered Exam Questions 2024. Nick, an overhead crane operator, needs to move a load. Following good housekeeping procedures, he checked his intended path and found it cluttered. What should Nick do? - correct answer Clear the aisle way first and make sure it's in good repair. Maria is an overhead crane operator. Which of the following are pre-planning steps she should take before she starts making a lift? - correct answer Check...

OSHA Cranes Study Guide Exam Questions 2024. Multi-Employer Citation Policy cites the following employers - correct answer Controlling, exposing, creating, correcting Crane types covered: - correct answer Crawler, barge, mobile, straddle, industrial, tower Crane types excluded: - correct answer Concrete pumps, backhoes, forklifts, drilling rigs, helicopters A crane is basically: - correct answer a piece of equipment with a hoist line that goes up and down A signal person must be: - ...

Rigging Practices Final Exam Questions 2024. A load chart range diagram can best be used to help identify: - correct answer net capacity for mobile crane working at maximum radius, exceeding what percentage of the cranes capacity requires the radius to be verified? - correct answer 80% the minimum depth of thread engagement for a 1/2 in eyebolt into steel object is? - correct answer 3/4 in when tying knots in synthetic rope lashing, the rated load is increased by 50% ? - correct answer...

Signal Person Training Course Study Guide Practice Test 2024. During all crane movements, ASME B30.5 states that communication shall be maintained: - correct answer Continuously If the communication is disrupted at any time while the crane is in operation, the operator Shall: - correct answer Stop all crane movements OSHA's Standard hand signals would be located in: - correct answer OSHA 1926.1400 Appendix A According to ASME B30.5, prior to qualifying all signals persons must be test...