GOLDEN ORCHIDS STORE.

ASVAB Auto and Shop information Exam Questions and Answers Mixture of Gas and Air (the fuel mixture) - Answer-What does the Internal Combustion engine burn? 1. Intake 2. Compression 3. Power 4. Exhaust - Answer-What are the 4 strokes that make up a cycle? (in car engine) Intake - Answer-This valve opens as the connecting rod pulls the piston down, drawing the gas/air mix into the cylinder Compression - Answer-The valves are closed. The connecting rod pushes the piston up, compressing...

CLT-LANA Exam Study Guide Stage 0 CVI - Answer-No symptoms, norm protein Stage I cvi - Answer-Mild edema, normal protein, norm lymph vessels, phlebolymphodynamic insufficiency Stage 2 cvi - Answer-Mod symptoms ( pigmentation, viscosity, pain), high protein, vessels morphologically changed, TC reduced, phlebolymphostatic insufficiency Stage 3 cvi - Answer-Severe symptoms( hypoxia, necrosis, pain), very high protein load, lymph vessels morphologically change, TC reduced, severe phlebolympho...

ASE Bundled Exams Questions and Answers

ASE Test Prep - A5 Brakes - Practice Test #1 Questions and Answers A restricted brake hose on the right side. - Answer-A vehicle pulls to the right after the brake pedal is released. This could be caused by: A. A restricted brake hose on the right side. B. A faulty metering valve. C. A cut master cylinder piston seal. D. A restricted brake hose on the left side. Neither A nor B - Answer-Technician A says that brake drag can be caused by a seized star wheel adjuster. Technician B says th...

ASE T5 Suspension & Steering Practice Test #1 Questions and Answers |100% Pass A device that is used on suspensions to primarily absorb energy and dampen suspension oscillation is called: A. An equalizer bracket. B. A torque rod. C. A spring. D. A shock absorber. - Answer-Answer A is incorrect. An equalizer bracket is used to mount and house the equalizer. Answer B is incorrect. The torque arm is used to control axle rotational forces and to maintain and adjust axle alignment. Answer...

ASE Study Guide with Complete Solutions An engine makes a knocking noise with the transmission in DRIVE. The knocking noise is not heard in PARK or NEUTRAL. Which of these could be the cause? A)Excessive main bearing clearance B)Low oil pressure C)A cracked flexplate D)A broken piston ring - Answer-C)A cracked flexplate An engine is overheating and has white smoke coming from the tail pipe. The cooling system is pressure tested and will not hold pressure. This could be caused by: A) ...

Free ASE Study Guide Practice Test Questions and answers True or False. Chlorine was found to do damage to the ozone layer? - Answer-True True or False. Different refrigerant are ok to be mixed together. Pressure characteristics are a little bit different but should not matter. - Answer-False. High pressure characteristics between R12 and R134a vary considerably. Will result in high head pressure and high system. A vehicle has poor air conditioning performance. The customer has added R134a...

ASE Practice Test 1 Questions and answers 100% Pass

ASE P2 A Exam Study Guide with complete solutions Accessories - Answer-Parts that add to the appearance or performance of a vehicle Accounts Receivable - Answer-Money due from customers Accumulator - Answer-Part of an air conditioning system that contains a desiccant that absorbs moisture from the refrigerant Active accounts - Answer-Current customers who make frequent purchases Active stock - Answer-Merchandise in the store that is readily available for sale to customer Air conditioning...

ASE MLR practice Questions and Answers |100% Pass a vehicles right front wheel has a growling noise that increases with vehicle speed. most likely cause is: - Answer-a worn out wheel bearing will cause a growl that increases with speed. White colored exhaust is billowing from the tailpipe of a vehicle. Which of the following is correct? A. It has worn piston rings. B. It has a leaking head gasket. C. It has worn valve seals. D. It has a leaking fuel injector. - Answer-Answer B is correc...

ASE MLR Certification Test Questions and Answers|100% Pass Both A and B - Answer-Technician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? A only - Answer-The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B ...

ASE G1 Maintenance and Lt. Repair Practice Test Questions and Answers

ASE Diesel Practice Test Questions and Answers When a diesel engine is operated under a load, coolant continually comes out of the radiator overflow and there are bubbles in the radiator. Which of these is the most likely cause? (A) Too much coolant in the cooling system (B) A clogged radiator (C) A stuck-open thermostat (D) Compression leakage into the cooling system - Answer-D A diesel engine has excessive black smoke when started in the morning. Which of these could be the cause? (A...

ASE Collision Repair and Refinish Tests Questions and Answers Painter A says that metal conditioner should be used under plastic filler to assure proper adhesion. Painter B says that metal conditioner should be used under plastic filler only if rust is present. Who is right? (A) A only (C) Both A and B (B) B only (D) Neither A nor B - Answer-* (D) Neither A nor B Painter A says that primer-surfacer will dry faster if it is sprayed in several coats with flash time between coats. Painter ...

ASE certification study guide with complete solutions Spark plugs are being replaced on a v6 engine. Which of the following should be performed before removing the boot? - Answer-Twist the boot 1/2 a turn Technician A days that a positive crankcase ventilation (pvc) system reduces vehicle emissions. Tech B says that a pvc system helps increase crankcase pressure. Who is correct? - Answer- Tech A Tech A says that secondary ignition wires should be inspected when replacing spark plugs. Tech...

ASE Certification Practice Test - Auto Electrical Systems Questions and Answers 1. Technician A says an automotive power mirror system's horizontal control motor operates the up-and-down movement of the mirror glass.Technician B says an automotive power mirror system's gear reduction decreases output torque.Who is right? A only. B only. Both A and B. Neither A nor B. - Answer-Neither A nor B. 2. A crimp connector must be replaced. Technician A twists the wire strands before insert...

ASE Certification Exam Questions and answers Both b and c - Answer-Coolant should be tested for ________. Proper color Freezing point (temperature) Specific Gravity Both b and c Both technician a and b - Answer-Two technicians are discussing a compression test. Technician A says that the engine should be cranked over with the pressure gauge installed for "4 puffs." Technician B says that the maximum difference between the highest reading cylinder and the lowest reading cylinder s...

ASE Brakes T4 Practice Test #1 Questions and Answers Which of the following could cause the brakes on a truck to wear too fast? A. Glazed Drums B. Wrong linings installed C. Low air pressure in the service tanks D. Governor cut-out pressure too high - Answer-Answer A is incorrect. Glazed drum linings are hard and do not wear. They also do not stop the truck. Answer B is correct. The wrong lining for the application may be the problem. Answer C is incorrect. Low air pressure in the tanks...

ASE BRAKES Exam #1 Practice Questions and Answers A - Answer-A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - Answer-A vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power steering fluid D. An overtight...

ASE B6 Test - Damage Analysis & Estimating Exam Questions and Answers What is the difference between a unitized frame and a uni-body? - Answer-There is no difference. In a uni-body or unitized vehicle, the frame and body are incorporated into a single welded structure. Should exhaust damaged systems be welded and repaired, or replaced all together? - Answer-Replaced. Exhaust gases contain poisonous carbon monoxide and leaks could create dangerous conditions for passengers. The "Inside...