EWRB

EWRB Theory Exam Prep Complete with Latest Questions and A+ Graded Verified Answers What is the minimum value of the permitted test result for the insulation resistance test of a three-phase, 400V, mains cable? 1MΩ When carrying out testing on a low voltage electrical installation, which document details the tests and checks required to be carried out? AS/NZS 3000 What is the minimum or maximum test result value you would consider acceptable for an Earth Continuity test? 1Ω or less Stat...

EWRB Theory Exam Prep ACTUAL QUESTIONS AND CORRECT ANSWERS What is the minimum value of the permitted test result for the insulation resistance test of a three-phase, 400V, mains cable? - CORRECT ANSWERS1MΩ When carrying out testing on a low voltage electrical installation, which document details the tests and checks required to be carried out? - CORRECT ANSWERSAS/NZS 3000 What is the minimum or maximum test result value you would consider acceptable for an Earth Continuity test? ...

EWRB THEORY EXAM QUESTIONS WITH CORRECT ANSWERS LATEST UPDATE 2025 What does BJT stand for? - Answers Bipolar Junction Transistor What does the transducer do? - Answers converts energy from one form to another State one factor that determines voltage drop - Answers Length of cable State one reason why a class 1 electrical appliance is set at a maximum of 1 ohm - Answers It prevents the touch voltages rising to dangerous levels State the test voltage used for carrying out an insulation resis...

ELECTRICAL THEORY PRACTICE TEST EXAM QUESTIONS AND ANSWERS WITH ACTUAL SOLUTIONS VERIFIED Voltmeter A high resistance is connected in series with the internal coil of a galvanometer to make? If a transformer ratio is 20/1, what does it mean for the secondary? The primary voltage is 20 times greater than that of the secondary. If a motor enclosure is designed to contain sparks or flashes that could ignite surrounding vapors or gases, then the enclosure is considered to be which of the follow...

EWRB THEORY PREP - LOTO EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS VERIFIED LOTO Lock Out Tag Out examples for protective /isolating device Disconnect Switch, MCB, Line valves LOTO tags must _____ the employee IDENTIFY employee LOTO devices shall be standard 1,2,3 1, colour 2, shape 3, size LOTO procedures can only b performed by ______ authorized employees 4 stored energy sources include 1, springs 2, hydraulics 3, tension 4, electricity purpose of LOTO To prevent the...

EWRB THEORY PREP - MCBS EXAM QUESTIONS WITH ANSWERS 100% GUARANTEED PASS LATEST UPDATE types of MCB trips thermal magnetic thermal tripping bi-metal strip, used for overload currents protection magnetic tripping magnetic inductor, used for short circuit protection reset procedure reset to OFF reset to ON arc containment includes horns carry current to chute, allow arc to jump out arc chute lengthens distance for arc to travel oil suppresses arc splitter plates split the arc arc c...

EWRB ELECTRICAL REGULATIONS EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS GRADED A++ Section 1 of 3000 iis about? Fundamental Principles Section 2 of 3000 is about? Control and Protection Section 3 of 3000 is about? Wiring Systems Section 4 of 3000 is about

EWRB THEORY PREP RCD SPECS EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS GRADED A++ RCD type AC detects and prevents imbalances in AC RCD personal protection (type ii) 30mA, 300ms RCD property protection (PRCD) 300mA

EWRB EXAM 49 QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS GRADED A++ State the main reason why a large industrial electrical installation has a higher prospective short circuit current (PSSC) than a domestic electrical installation. The fault loop impedance is lower Because the distribution transformer is close to the installation or on-site A CT metering circuit is measuring the consumption of an industrial electrical installation at near to full load. The CT secondary must be shortcircu...

EWRB EXAM QUESTIONS 63 AND ANSWERS WITH COMPLETE SOLUTIONS LATEST UPDATE In New Zealand, the standard distribution system has the neutral conductor connected to the earth at the main switchboard on all low voltage installations. What name is given to this type of system? Multiple Earthed Neutral or MEN system. State the test voltage used for carrying out an insulation resistance test on three-phase, 400V, electrical equipment incorporating MIMS elements. 500v dc State one reason why the r...