CM 2501
Louisiana State University
Hier vind je de beste samenvattingen om te slagen voor CM 2501. Er zijn o.a. samenvattingen, aantekeningen en oefenvragen beschikbaar.
Alle 8 resultaten
Sorteer op:
-
Tentamen (uitwerkingen)
Module 9: Cranes, Derricks, Hoists, Elevators and Converyors Questions and Answers.
-
---1januari 20262025/2026A+
- cranes and derricks installed on floating surfaces must have a ____ placed where it can be easily seen by the proctors. - Answer Boom angel indicator 
 
when is it acceptable to use a personnel platform to raise and lower workers - Answer Other means of access would be more dangerous or impossible. 
 
Which of the following is an example of conditions that may limit the load rating of a crane? - Answer The crane is not on level ground 
 
The ____ oversees and directs all crane ...
-
€10,39 Meer Info
TestSolver9
-
Tentamen (uitwerkingen)
Module 4 and 5 Resources Test Questions with Accurate Answers 2025-2026 Updated.
-
---6januari 20262025/2026A+
- In which chapter of the NEC® will you find the installation requirements for conduit? - Answer Chapter 3 
 
The maximum number of degrees allowed between pull points in a conduit run is 360 degrees. - Answer 360 
 
Offsets and saddles ___________. - Answer must be included when calculating total degrees between pull points 
 
Would 4" rigid metal conduit be bent using a mechanical bender? - Answer no 
 
The maximum size IMC that can be bent using a portable mechanical...
-
€11,01 Meer Info
TestSolver9
-
Tentamen (uitwerkingen)
CM 2501 - Hebert - Test 1 And Test 2 Questions and Answers.
-
---4januari 20262025/2026A+
- live - Answer Gravity load that can be removed from a structure such as people and furniture. 
 
dead - Answer Gravity load that cannot be removed from a structure such as walls and floors. 
 
wind - Answer Lateral load caused by _____ that varies in intensity with the building's height, location, and shape. 
 
earthquake - Answer Lateral load that impacts buildings at grade level and acts in a "shaking" manner upon the superstructure. 
 
thermal - Answer T...
-
€10,57 Meer Info
TestSolver9
-
Tentamen (uitwerkingen)
CM 2501 Quizzes 1-4 Tests with All Correct Answers 2025-2026 Updated.
-
---3januari 20262025/2026A+
- An arch is best suited for what type of stress? - Answer Compression 
 
The weight of the materials that a structure is built with are considered to be _____ loads. - Answer Dead 
 
Under typical loading, ______ stress is the primary stress. - Answer Bending 
 
At the time the book was written, what was the largest hall in the world? - Answer Superdome 
 
Did Da Vinci or Galileo have a better understanding of the behavior of a beam under a load? - Answer Da Vinci 
 ...
-
€10,13 Meer Info
TestSolver9
-
Tentamen (uitwerkingen)
CM 2501 - Hebert - Final Exam Questions All Answered Correct Graded A+.
-
---5januari 20262025/2026A+
- live - Answer Gravity load that can be removed from a structure such as people and furniture. 
 
dead - Answer Gravity load that cannot be removed from a structure such as walls and floors. 
 
wind - Answer Lateral loads caused by _____ vary in intensity with the building's height, location, and shape. 
 
earthquake - Answer Lateral load that impacts buildings at grade level and acts in a "shaking" manner upon the superstructure. 
 
thermal - Answer Type of...
-
€10,57 Meer Info
TestSolver9
-
Tentamen (uitwerkingen)
CM 2501 final Questions and Answers.
-
---2januari 20262025/2026A+
- false - Answer arches are always considered to be in tension 
 
false - Answer bending stress is the primary type of stress seen in a typical arch 
 
false - Answer the units of a moment are a force times a distance squared 
 
resultant - Answer the ____ is a single vector that is an equal replacement of a group of vectors that has the same external effect 
 
compressive - Answer _____ stress is the main stress typically associated with columns 
 
1 - Answer a...
-
€10,13 Meer Info
TestSolver9
-
Tentamen (uitwerkingen)
CM 2501 Exam 1 And Exam 2 Questions and Answers 2025-2026 Updated.
-
---4januari 20262025/2026A+
- live loads - Answer loads that include people and most movable objects. an example is snow even though it is usually handled as a separate type of load. 
 
dead loads - Answer loads that include the structure itself and most immovable objects. 
 
tension - Answer pulling apart 
this type of stress is usually evenly distributed across the structural element, making the resisting of this type of stress very efficient. 
 
compression - Answer crushing or smashing together 
t...
-
€10,57 Meer Info
TestSolver9
-
Tentamen (uitwerkingen)
Chapter 9,11 Test Questions and Correct Answers.
-
---4januari 20262025/2026A+
- 1. Each construction activity on a project has a relatively short duration. T/F - Answer 1. True 
 
2. Most construction activities occur where the general public does not have access to them. T/F - Answer 2. False 
 
3. Some legal issues exist when employing a drug testing and substance abuse program. T/F - Answer 3. True 
 
4. All states require that safety communications be conveyed to employees in a variety of ways. T/F - Answer 4. True 
 
5. All injuries and illnesse...
-
€10,57 Meer Info
TestSolver9