CPCS Test Exam Questions And Answers Verified 100% Correct

CPCS Test Exam Questions And Answers Verified 100% Correct Lift FOUR factors that could cause a loss of vision to the plant driver - ANSWER -Dirty windows Wet weather Strong sunlight Broken mirrors What should a marshaller consider when guiding road transport vehicles compared to site based plant - ANSWER -road vehicles have poorer off-road abilities What should the marshaller take into account when positioning an item of plans which is able to slew in a confined area - ANSWER -Counter weight does not collide with structures or crest crush zone Name THREE things that should be checked both prior to and DURING operations when guiding plant on BROWNFIELD site - ANSWER -Soft ground due to contamination Voids Hazardous materials If the marshaller is guiding an item of plant or a vehicle near to the edge of an excavation/tipping zone for tipping a load, what control measures must they ensure are in place? - ANSWER -Barriers Edge protection Stop blocks A) What should the marshaller check before they start to guide and assist an item of plant that is being repositioned ? B)what is the general rule for the positioning of the cab on a 360° slew type machine when travelling? C)when would there be an exception to this rule ? - ANSWER -A) the machine is set up correctly for travel B) facing the direction of travel C) only when the operator can't face the direction of travel When deciding to Marshall a reversing vehicle what TWO considerations should be made to the Marshaller position - ANSWER -1)Keep out of moving path 2)Keep eye contact with operator What's factors could affect the movement of plant or vehicles during wet weather compared to try weather - ANSWER -Reduced traction and steering and less visibility A) What's should be considered before anyone unlatches and opens any tailgates to unload ? B) before easing the body ? - ANSWER -A) Need to make sure everyone is clear B) Make sure the load won't jam possibly causing it to tip If an item of plant or vehicle is turning on a slope, what could possibly cause the machine to overturn? - ANSWER -Speed of machine Turning up/down slope Condition of the slope Describe the six actions that the marshaller should undertake when a delivery vehicle arrives on site to be unloaded at a different area - ANSWER -Approach the vehicle Make a communication system Find the route Control the vehicle to unloading area Guide to position Keep area clear Name FOUR possible causes where the marshaller capabilities could be exceeded - ANSWER -New work Unauthorised movement Traffic plan change Weather conditions If a delivery vehicle has to shunt backwards and forward when reversing into a site from the public highway, what danger could occur? - ANSWER -Pedestrians and traffic fail to to understand movement and continue to go Name FIVE items that should be found within traffic management plan - ANSWER -Entry to/from site Site routes One way systems Pedestrian walkways Holding areas What procedure would a marshaller follow if an emergency vehicle needs to be directed? - ANSWER -All vehicle movement stops and ensure the ways clear and assist with movement if required What checks must be taken if site conditions change overnight - ANSWER -Check the site allows movement of vehicles depending on type and weight of the vehicle When marshalling plant and vehicles in a given area, what should the marshaller anticipate? - ANSWER -Other traffic and pedestrians Give FOUR reasons that may cause an item of plant to tip over sideways - ANSWER -Deep potholes Uneven ground Turning too quickly Heavy load