RTV 3543 Test Questions with Correct Answers Latest Update 2025/2026
Tripod, Camera, Monitor, Fiber - Answers In what order should the camera be set up?
Plug in camera fiber, turn on fiber, turn on camera - Answers What is the correct order for
powering on a fiber hut and camera?
Left side of the lens - Answers Where is the 1x/2x extender located on the Panasonic 5000?
Bottom of the zoom control - Answers Where is the return found on the rear controls?
*Just wrong - Answers Which of these is true for a Basketball Event?
White balance, iris - Answers What functions on the camera are controlled by the shading
operator?
5600K - Answers What is the standard color temperature for shooting outdoors?
When the director tells you, throughout the game - Answers When should you adjust camera
settings?
Making all the cameras match - Answers What is the most important job of shading?
RCV bar is full, can open and close iris - Answers How do you know if you have control over the
iris of a camera?
When queued by the Director - Answers When should you bring the faders up and down?
Master is not tracked - Answers What does having a "dead board" mean?
PA - Answers During a Basketball Videoboard Show, what audio output should always be on?
Source faded and master - Answers What fader or faders should be up for a source to be heard?
Both a and b - Answers During an ACCNE show, music is important:
4 in, 2 out - Answers One DreamCatcher system has 6 in/out streams. How does Seminole
Productions configure these streams?
In, Out, Click - Answers What are the steps needed to save a clip?
Play button for full, t bar for variable, etc. - Answers Which of the following is true?
Datalink Server - Answers External data sources are fed into Xpression via:
Sequence - Answers Scenes are duplicated, modified, organized and sent to 'program' in
__________ view/mode.
All three clear graphics - Answers To clear all graphics from the program channels, you press:
Tripod, Camera, Monitor, Fiber - Answers In what order should the camera be set up?
Plug in camera fiber, turn on fiber, turn on camera - Answers What is the correct order for
powering on a fiber hut and camera?
Left side of the lens - Answers Where is the 1x/2x extender located on the Panasonic 5000?
Bottom of the zoom control - Answers Where is the return found on the rear controls?
*Just wrong - Answers Which of these is true for a Basketball Event?
White balance, iris - Answers What functions on the camera are controlled by the shading
operator?
5600K - Answers What is the standard color temperature for shooting outdoors?
When the director tells you, throughout the game - Answers When should you adjust camera
settings?
Making all the cameras match - Answers What is the most important job of shading?
RCV bar is full, can open and close iris - Answers How do you know if you have control over the
iris of a camera?
When queued by the Director - Answers When should you bring the faders up and down?
Master is not tracked - Answers What does having a "dead board" mean?
PA - Answers During a Basketball Videoboard Show, what audio output should always be on?
Source faded and master - Answers What fader or faders should be up for a source to be heard?
Both a and b - Answers During an ACCNE show, music is important:
4 in, 2 out - Answers One DreamCatcher system has 6 in/out streams. How does Seminole
Productions configure these streams?
In, Out, Click - Answers What are the steps needed to save a clip?
Play button for full, t bar for variable, etc. - Answers Which of the following is true?
Datalink Server - Answers External data sources are fed into Xpression via:
Sequence - Answers Scenes are duplicated, modified, organized and sent to 'program' in
__________ view/mode.
All three clear graphics - Answers To clear all graphics from the program channels, you press:
