FRA Tier 1 (Part 213) Questions with Correct
Answers 100% Solved
Save
Terms in this set (52)
standard track gage 56 1/2 in
excepted track gage 58 1/4 in
if track is defective for out of service
more than 30 days, it is
_________
part 213 prescribes minimum safety requirements for railroad track that is
_____________________________ part of the general railroad system of transportation
______________________ track is excepted
not to be located within
30 feet of an adjacent
track which can be
subjected to simultaneous
use at speeds in excess of
10 miles per hour
How soon should the FRA at least 10 days
be advised prior to
removing a track from
excepted status?
CWR is rail length that 400
exceeds _____ feet
, Does rail installed as CWR No
change when a joint or
plug is installed into the
rail at a later time?
rail expands when heated; contracts
_________________ and
_______________ when cooled
temperature at which rail neutral temperature
CWR is neither in tension
or compression
location-specific rail target neutral temperature
neutral temperature for
CWR
target neutral temperature temperature differential
minus actual rail
temperature
gap distance rail moves when cut (in tension)
pull compressed rail pulled into shape
rail can be ____________________ de-stressed
by cutting out rail or re-
aligning a curve
what reference material Track Compliance Manual, Title 49 and BNSF EI
and resources are
available to you when you
need information about
the FRA Track Safety
Standards?
what information will you maximum allowable speed for freight and passenger
find in the class of track trains; section 213.9
table and where will you
find the table
Answers 100% Solved
Save
Terms in this set (52)
standard track gage 56 1/2 in
excepted track gage 58 1/4 in
if track is defective for out of service
more than 30 days, it is
_________
part 213 prescribes minimum safety requirements for railroad track that is
_____________________________ part of the general railroad system of transportation
______________________ track is excepted
not to be located within
30 feet of an adjacent
track which can be
subjected to simultaneous
use at speeds in excess of
10 miles per hour
How soon should the FRA at least 10 days
be advised prior to
removing a track from
excepted status?
CWR is rail length that 400
exceeds _____ feet
, Does rail installed as CWR No
change when a joint or
plug is installed into the
rail at a later time?
rail expands when heated; contracts
_________________ and
_______________ when cooled
temperature at which rail neutral temperature
CWR is neither in tension
or compression
location-specific rail target neutral temperature
neutral temperature for
CWR
target neutral temperature temperature differential
minus actual rail
temperature
gap distance rail moves when cut (in tension)
pull compressed rail pulled into shape
rail can be ____________________ de-stressed
by cutting out rail or re-
aligning a curve
what reference material Track Compliance Manual, Title 49 and BNSF EI
and resources are
available to you when you
need information about
the FRA Track Safety
Standards?
what information will you maximum allowable speed for freight and passenger
find in the class of track trains; section 213.9
table and where will you
find the table
