DANTE LEVEL 1 TEST PAPER UPDATED STUDY QUESTIONS
AND ANSWERS GRADED A+
✔✔How are devices added to a Dante network? - ✔✔Devices are automatically
discovered and displayed in Dante Controller
✔✔How are devices restored to a Dante network after power cycle? - ✔✔Devices and
connections are automatically restored
✔✔Dante devices with different sample rates can be on the same network and [ ... ]
subscribe channels between them. - ✔✔cannot
✔✔In the Dante Controller Routing tab, a green checkmark indicates: - ✔✔Subscription
successful
✔✔Dante is an example of [ ... ]. - ✔✔an audio over IP (AoIP) solution
✔✔On a Dante network, latency is: - ✔✔deterministic, set per device
✔✔The default Dante latency of 1 millisecond is: - ✔✔very low and suitable for the
majority of applications
✔✔A gigabit connection can handle [ ... ] channels of Dante audio at 48kHz sample rate
and 24-bit depth. - ✔✔512x512
✔✔A connection between Dante audio channels is called: - ✔✔a subscription
✔✔What are the steps to delete a subscription in Dante Controller? (drag to put steps in
the correct order) - ✔✔1) Open both transmitter and receiver to expose channels
2) Click green checkmark at intersection of channels you wish to unsubscribe
3) Wait for green checkmark to disappear
✔✔How are device names used in Dante? - ✔✔Subscriptions are made from name to
name
✔✔What is a LAN? - ✔✔A computer network that interconnects computers using a
common range of IP addresses
✔✔Do Dante devices require special IP configuration? - ✔✔No, all commonly supported
IP address methods are supported
✔✔Does a Dante network require special configuration for clocking? - ✔✔No. A Clock
Master is always automatically elected by Dante
AND ANSWERS GRADED A+
✔✔How are devices added to a Dante network? - ✔✔Devices are automatically
discovered and displayed in Dante Controller
✔✔How are devices restored to a Dante network after power cycle? - ✔✔Devices and
connections are automatically restored
✔✔Dante devices with different sample rates can be on the same network and [ ... ]
subscribe channels between them. - ✔✔cannot
✔✔In the Dante Controller Routing tab, a green checkmark indicates: - ✔✔Subscription
successful
✔✔Dante is an example of [ ... ]. - ✔✔an audio over IP (AoIP) solution
✔✔On a Dante network, latency is: - ✔✔deterministic, set per device
✔✔The default Dante latency of 1 millisecond is: - ✔✔very low and suitable for the
majority of applications
✔✔A gigabit connection can handle [ ... ] channels of Dante audio at 48kHz sample rate
and 24-bit depth. - ✔✔512x512
✔✔A connection between Dante audio channels is called: - ✔✔a subscription
✔✔What are the steps to delete a subscription in Dante Controller? (drag to put steps in
the correct order) - ✔✔1) Open both transmitter and receiver to expose channels
2) Click green checkmark at intersection of channels you wish to unsubscribe
3) Wait for green checkmark to disappear
✔✔How are device names used in Dante? - ✔✔Subscriptions are made from name to
name
✔✔What is a LAN? - ✔✔A computer network that interconnects computers using a
common range of IP addresses
✔✔Do Dante devices require special IP configuration? - ✔✔No, all commonly supported
IP address methods are supported
✔✔Does a Dante network require special configuration for clocking? - ✔✔No. A Clock
Master is always automatically elected by Dante
