NEIEP 500 Final Review @2024 Exam Questions With
Accurate Solutions.
Ground (515 pg. 26) - accurate answers-What does the symbol shown below
represent?
3 (555 pg. 26) - accurate answers-How many turns of safety rope must remain
on the safety drum after a rated load and rated speed test of a winding drum
operated safety?
rail jack bolts (555 pg. 16) - accurate answers-Proper adjustment of which of
the following can reduce the effects of building compression on an elevator
installation?
Liquid tight Flexible Metal Conduit (505 pg. 6) - accurate answers-What type
of flex would be used to pipe a switch in a wet location?
door clutch (530 pg. 30) - accurate answers-Which of the following
components is used to engage and couple the car door to the hoist way door
during opening and closing?
100 feet (510 pg. 10) - accurate answers-On high rise of raceways, the wires
must be supported at least how many feet?
#14 (505 pg. 36) - accurate answers-What is the minimum size wire allowed
be code for wiring 100 VAC lighting circuits to elevator cars?
raceway (505 pg. 1) - accurate answers-What is the metal enclosure that
furnishes protection for electrical wire called?
42 inches - accurate answers-What is the minimum height of a barricade
placed around as open hoist way?
360 degrees - accurate answers-When bending conduit, what is the maximum
number of bends in degrees between access points?
proximity devices (535 pg. 23) - accurate answers-Which of the following
would be used to automatically reopen the doors without physical contact of
power operated vertically sliding freight elevator doors?
, It must be tamper proof to prevent override of the door contacts (535 pg. 9) -
accurate answers-Which of the following is a requirement that must be met
when interlocks are installed on freight elevators?
The cam must apply a force that is double that required for normal interlock
operation (515 pg. 26) - accurate answers-When setting up a retiring cam for
a freight elevator, which of the following statements is correct?
keeper (535 pg. 19) - accurate answers-What device is installed to hold the
vertically sliding biparting freight doors mechanically closed?
They must be installed on all dumbwaiters (545 pg. 19) - accurate answers-
Which of the following statements is correct for dumbwaiter installations that
use mechanical locks and electrical contacts?
They are required at the terminal landings when the rise is 25 feet or greater
(545 pg.4) - accurate answers-What is the requirement for hoistway access
switches for dumbwaiters?
The 110 VAC lighting circuit (510 pg. 46) - accurate answers-What terminals
in the hoistway junctions box could most likely be hot even with the main line
disconnect open?
7 feet (510 pg. 21) - accurate answers-What is the minimum overhead
clearance for raceways mounted in the machine room overhead?
45 inches (515 pg. 8) - accurate answers-What is the minimum loop size for 1
1/2 inch traveling cable?
All splices must be accessible after installation is complete - accurate answers-
Which of the following is correct about splicing wires?
Isolated - accurate answers-What type of cab platform frame is required when
a platform load weighing system is being included?
The loop circuit is open (520 pg. 11) - accurate answers-If there is voltage at
the generator armature but not at the motor armature, what is most likely
wrong?
Accurate Solutions.
Ground (515 pg. 26) - accurate answers-What does the symbol shown below
represent?
3 (555 pg. 26) - accurate answers-How many turns of safety rope must remain
on the safety drum after a rated load and rated speed test of a winding drum
operated safety?
rail jack bolts (555 pg. 16) - accurate answers-Proper adjustment of which of
the following can reduce the effects of building compression on an elevator
installation?
Liquid tight Flexible Metal Conduit (505 pg. 6) - accurate answers-What type
of flex would be used to pipe a switch in a wet location?
door clutch (530 pg. 30) - accurate answers-Which of the following
components is used to engage and couple the car door to the hoist way door
during opening and closing?
100 feet (510 pg. 10) - accurate answers-On high rise of raceways, the wires
must be supported at least how many feet?
#14 (505 pg. 36) - accurate answers-What is the minimum size wire allowed
be code for wiring 100 VAC lighting circuits to elevator cars?
raceway (505 pg. 1) - accurate answers-What is the metal enclosure that
furnishes protection for electrical wire called?
42 inches - accurate answers-What is the minimum height of a barricade
placed around as open hoist way?
360 degrees - accurate answers-When bending conduit, what is the maximum
number of bends in degrees between access points?
proximity devices (535 pg. 23) - accurate answers-Which of the following
would be used to automatically reopen the doors without physical contact of
power operated vertically sliding freight elevator doors?
, It must be tamper proof to prevent override of the door contacts (535 pg. 9) -
accurate answers-Which of the following is a requirement that must be met
when interlocks are installed on freight elevators?
The cam must apply a force that is double that required for normal interlock
operation (515 pg. 26) - accurate answers-When setting up a retiring cam for
a freight elevator, which of the following statements is correct?
keeper (535 pg. 19) - accurate answers-What device is installed to hold the
vertically sliding biparting freight doors mechanically closed?
They must be installed on all dumbwaiters (545 pg. 19) - accurate answers-
Which of the following statements is correct for dumbwaiter installations that
use mechanical locks and electrical contacts?
They are required at the terminal landings when the rise is 25 feet or greater
(545 pg.4) - accurate answers-What is the requirement for hoistway access
switches for dumbwaiters?
The 110 VAC lighting circuit (510 pg. 46) - accurate answers-What terminals
in the hoistway junctions box could most likely be hot even with the main line
disconnect open?
7 feet (510 pg. 21) - accurate answers-What is the minimum overhead
clearance for raceways mounted in the machine room overhead?
45 inches (515 pg. 8) - accurate answers-What is the minimum loop size for 1
1/2 inch traveling cable?
All splices must be accessible after installation is complete - accurate answers-
Which of the following is correct about splicing wires?
Isolated - accurate answers-What type of cab platform frame is required when
a platform load weighing system is being included?
The loop circuit is open (520 pg. 11) - accurate answers-If there is voltage at
the generator armature but not at the motor armature, what is most likely
wrong?
