IICRC WRT & ASD Updated Final Prep 2025/26 |
Correct Answers Included | A+ Score
Wearing PPE on a sewage damaged project shall be done because it - Is mandotary due
to natural law or regulatory requirement
technicians Should clean and dry affected materials because it is - component of the
accepted standard of care, but not mandatory.
If something is recommended, that means it is - Advised or suggested but not a
component of the standard of care
May means - Signifies permission but not a component of the standard of care
The word CAN means - The ability or possibility but not a component of the standard of
care
We need to leave buildings that have been damaged by water both - Clean and dry
The first concern of restorers on a project is - The health and safety of workers and
occupants
why is rapid response so important - Limits the potential for damages and can reduce
drying time
Attempting to identify safety issues should begin as soon as - The inspection process
you find sagging ceilings that are heavy and saturated with water what should you do? -
Drain the water, remove the saturated drywall and dispose of it
When water is evaporating and leaving a surface the surface - Cools
Air movers primarily aid in drying by increasing - The rate of evaporation
PPE is required by regulations so it shall be used according to the s500 - True
Thermal imaging cameras help find water that is evaporating because the surface is -
Cooler
Other than extraction what has the most effect on drying time - The rate of evaporation
what air temperature range is ideal for LGR dehumidifiers? - 70-90F
, This course is designed as a comprehensive safety course - False
For safety, drying equipment shall be equipped with a - Grounded plug
name 3 components of a respiratory protection program - Medical evaluation, fit testing,
and proper training
If you are cleaning up a sewer damaged project, at a minimum what PPE should be worn? -
Full face respiratory, water resistant suit and waterproof gloves and boots
This course is designed to teach you how to identify and handle hazardous material -
False
Name two hazardous materials that are more likely to be found in older building - Lead
and asbestos
What organization has safety and health courses specifically tailored to the restoration industry
- IICRC
According to the Hierarchy of controls what is the least effective control measure? - PPE
What is an IEP - Indoor Environmental Professional
What begins at 20% wood moister content or above? - Wood Root Fungi
What can begin at 16% wood moister content? - Non-destructive mold growth
Name 2 reasons why we should begin remediation as soon as possible. - Reduce
potential for damage and reduce potential for microbial growth
What antimicrobial provides the lowest level of microorganism reduction - Sanitizer
When you find mold on a water damage project, what are 3 things you should do? - Put
on appropriate PPE, initial barriers or containment and install ventilation
If you find mold growth, what equipment would you not install? - Air movers
what category of water is from a sanitary source and not likely to make you sick? - Cat 1
What category of water contains significant contamination and can make you sick? - Cat 2
When should a restorer consider bringing in an IEP on a Cat 2 or Cat 3 water intrusion? -
Where there are high risk individuals or situations
Correct Answers Included | A+ Score
Wearing PPE on a sewage damaged project shall be done because it - Is mandotary due
to natural law or regulatory requirement
technicians Should clean and dry affected materials because it is - component of the
accepted standard of care, but not mandatory.
If something is recommended, that means it is - Advised or suggested but not a
component of the standard of care
May means - Signifies permission but not a component of the standard of care
The word CAN means - The ability or possibility but not a component of the standard of
care
We need to leave buildings that have been damaged by water both - Clean and dry
The first concern of restorers on a project is - The health and safety of workers and
occupants
why is rapid response so important - Limits the potential for damages and can reduce
drying time
Attempting to identify safety issues should begin as soon as - The inspection process
you find sagging ceilings that are heavy and saturated with water what should you do? -
Drain the water, remove the saturated drywall and dispose of it
When water is evaporating and leaving a surface the surface - Cools
Air movers primarily aid in drying by increasing - The rate of evaporation
PPE is required by regulations so it shall be used according to the s500 - True
Thermal imaging cameras help find water that is evaporating because the surface is -
Cooler
Other than extraction what has the most effect on drying time - The rate of evaporation
what air temperature range is ideal for LGR dehumidifiers? - 70-90F
, This course is designed as a comprehensive safety course - False
For safety, drying equipment shall be equipped with a - Grounded plug
name 3 components of a respiratory protection program - Medical evaluation, fit testing,
and proper training
If you are cleaning up a sewer damaged project, at a minimum what PPE should be worn? -
Full face respiratory, water resistant suit and waterproof gloves and boots
This course is designed to teach you how to identify and handle hazardous material -
False
Name two hazardous materials that are more likely to be found in older building - Lead
and asbestos
What organization has safety and health courses specifically tailored to the restoration industry
- IICRC
According to the Hierarchy of controls what is the least effective control measure? - PPE
What is an IEP - Indoor Environmental Professional
What begins at 20% wood moister content or above? - Wood Root Fungi
What can begin at 16% wood moister content? - Non-destructive mold growth
Name 2 reasons why we should begin remediation as soon as possible. - Reduce
potential for damage and reduce potential for microbial growth
What antimicrobial provides the lowest level of microorganism reduction - Sanitizer
When you find mold on a water damage project, what are 3 things you should do? - Put
on appropriate PPE, initial barriers or containment and install ventilation
If you find mold growth, what equipment would you not install? - Air movers
what category of water is from a sanitary source and not likely to make you sick? - Cat 1
What category of water contains significant contamination and can make you sick? - Cat 2
When should a restorer consider bringing in an IEP on a Cat 2 or Cat 3 water intrusion? -
Where there are high risk individuals or situations
