BCTC Industrial
Maintenance
Technology AMTEC
(NOCTI Mechatronic)
Review Review Latest
Update.
,BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic)
BCTC Industrial Maintenance Technology AMTEC
(NOCTI Mechatronic) Review Latest Update.
If you inhale phenolic fumes what would happen to you? - ✔✔✔-Trouble breathing
A _________ fire extinguisher should be used on an electrical fire. - ✔✔✔-Class C
What does OSHA stand for? - ✔✔✔-Occupational Safety & Health Administration
This type of drawing represents a three-dimensional object using several two-
dimensional views of the object. - ✔✔✔-Orthographic
What are linear dimensions usually expressed in? - ✔✔✔-Decimal or Fractional
Units
What does a filled triangle represent in a fluid power diagram? - ✔✔✔-Hydraulic
Flow
What can happen if bolts and nuts are not properly torqued? - ✔✔✔-They wear
out quickly and can cause failure.
What safety practice is used to prevent equipment from being energized? - ✔✔✔-
Lockout/Tagout
A Safety Data Sheet (SDS) provides information about first aid measures, stability
and reactivity, and _____? - ✔✔✔-Handling and Storage
®™
, BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic)
Which of the following is not true of a title block? - ✔✔✔-Format is the same from
company to company.
A NFPA 70E is a regulation that provides guidelines and details for ___________? -
✔✔✔-Electrical safety
GFCI devices are used for what purpose? - ✔✔✔-To prevent a person from being
electrocuted.
A person with serious electrical injury should be moved only when _______. - ✔✔✔-
They are in immediate danger
What must be provided by chemical manufacturers, distributors, and importers to
anyone who will work with these potentially dangerous materials? - ✔✔✔-Safety
Data Sheet (SDS).
You come across a fellow employee who is being electrocuted by becoming
attached to a live electrical circuit, what is the first thing you should do? - ✔✔✔-
Shut off the circuit.
What would slippery floors and cluttered walkways be considered in the
workplace? - ✔✔✔-Physical hazards.
What tool is used to measure the turning force when tightening a fastener? -
✔✔✔-Torque Wrench
When working on an electrical, fluid power, or mechanical system a ____ procedure
should be performed to lock out the energy. - ✔✔✔-LOTO
®™
Maintenance
Technology AMTEC
(NOCTI Mechatronic)
Review Review Latest
Update.
,BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic)
BCTC Industrial Maintenance Technology AMTEC
(NOCTI Mechatronic) Review Latest Update.
If you inhale phenolic fumes what would happen to you? - ✔✔✔-Trouble breathing
A _________ fire extinguisher should be used on an electrical fire. - ✔✔✔-Class C
What does OSHA stand for? - ✔✔✔-Occupational Safety & Health Administration
This type of drawing represents a three-dimensional object using several two-
dimensional views of the object. - ✔✔✔-Orthographic
What are linear dimensions usually expressed in? - ✔✔✔-Decimal or Fractional
Units
What does a filled triangle represent in a fluid power diagram? - ✔✔✔-Hydraulic
Flow
What can happen if bolts and nuts are not properly torqued? - ✔✔✔-They wear
out quickly and can cause failure.
What safety practice is used to prevent equipment from being energized? - ✔✔✔-
Lockout/Tagout
A Safety Data Sheet (SDS) provides information about first aid measures, stability
and reactivity, and _____? - ✔✔✔-Handling and Storage
®™
, BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic)
Which of the following is not true of a title block? - ✔✔✔-Format is the same from
company to company.
A NFPA 70E is a regulation that provides guidelines and details for ___________? -
✔✔✔-Electrical safety
GFCI devices are used for what purpose? - ✔✔✔-To prevent a person from being
electrocuted.
A person with serious electrical injury should be moved only when _______. - ✔✔✔-
They are in immediate danger
What must be provided by chemical manufacturers, distributors, and importers to
anyone who will work with these potentially dangerous materials? - ✔✔✔-Safety
Data Sheet (SDS).
You come across a fellow employee who is being electrocuted by becoming
attached to a live electrical circuit, what is the first thing you should do? - ✔✔✔-
Shut off the circuit.
What would slippery floors and cluttered walkways be considered in the
workplace? - ✔✔✔-Physical hazards.
What tool is used to measure the turning force when tightening a fastener? -
✔✔✔-Torque Wrench
When working on an electrical, fluid power, or mechanical system a ____ procedure
should be performed to lock out the energy. - ✔✔✔-LOTO
®™
