AVIXA CTS Sample Questions with
correct Answers
Use an RT60 meter - Correct Answers -What is the BEST way to determine how
reverberant a space is?
-Clap your hands and listen for an echo
-Ask the client if anyone has complained that the room is too noisy
-Use an RT60 meter
-Use a DB SPL meter
Site survey - Correct Answers -The correct time to discuss visible finishes for wall
plates, surface mount speakers, and wall mounted screen casings is during the:
-Ordering
-Installation
-Site survey
-Contract award
Speak with the client about getting more information on how to address the noise
source - Correct Answers -While surveying a conference room for a system upgrade, an
engineer measures 55 dB SPL A-wtd of ambient noise when the room is empty. How
should they proceed? -Add voice lift to the system proposal
-Add more loudspeakers to the system proposal
-Speak with the client about getting more information on how to address the noise
source
-Do nothing, this level of ambient noise is well within system tolerance
Divisible room - Correct Answers -A client needs to add videoconferencing functionality
for high-level, private meetings. Which of following planned space types should you
advise be ruled out?
-Divisible room
-Boardroom
-Conference room -Classroom
The Design Phase - Correct Answers -Which phase of an AV project comes
immediately AFTER the Program Phase? -The Design Phase
-Project Planning and Coordination Phase
-The Verification Phase
-The Documentation Phase
,Detailed list of equipment - Correct Answers -Which is NOT presented in the program
report: -Executive Summary -Detailed list of equipment -Budgets
-Infrastructure Considerations
An overview of the programming process including who was surveyed during the
process. - Correct Answers -When preparing an executive summary what should be
included for submittal to the client?
-A deep dive, including full technical specficiation, of all equipment to be used in the
design.
-An estimation of how many change orders might be required if the client doesn't use
your design.
-References to new and emerging technologies that should be considered for future
spaces.
-An overview of the programming process including who was surveyed during the
process.
Additive color system - Correct Answers -Which system is used to show colors from a
video display?
-Additive color system -Subtractive color system -Plus/minus color system -Recover
color system
25 db - Correct Answers -An installed audio system should be AT LEAST __________
above the ambient noise floor.
-5 dB
-25 dB
-45 dB
-75 dB
RS-232 - Correct Answers -A device is controlled using the pictured cable. What is the
MOST LIKELY method of controlling this device?
-IR
-RF
-RS-232
-Network
5:1 - Correct Answers -The minimum load safety rating for mounting audio visual
equipment is:
-3:1
-5:1
-8:1
-10:1
- Correct Answers -__ is the process of examining methods, techniques, and principles
from peer organizations and facilities. Schematic Design Punching a system
Benchmarking Schematic Design
, - Correct Answers -The document which is presented to the end user as a summary of
the need analysis and site survey is called the: Scope Review AV Guidelines Document
Program Report Customer Site Documentation Report
- Correct Answers -When establishing initial contact with a client, try to develop a
relationship early on with the: Chief operating officer Information technology manager
Stakeholders Purchasing manager
- Correct Answers -What document provides a detailed record of all repairs and service
work associated with the Audio Visual systems? Service Manual Repair Guide
Maintenance Log As Built Drawings
- Correct Answers -In the needs analysis pyramid what is used to define tasks that will
be used to define the scope of the project? Functions and Features End User Needs
Applications The Program Report
On Friday afternoons. - Correct Answers -As part of regular system maintenance, when
is the BEST time to update device firmware?
-On Friday afternoons.
-As soon as updates are available.
-Device firmware should never be updated after system sign-off.
-After coordination with the client, and when the system will be available for an
extended period of time
Black Level - Correct Answers -The brightness controls on a display adjusts which
level?
-Black Level
-Chroma Level
-Hue
-White Level
Spot Photometer - Correct Answers -When verifying a display system, which of the
following should be used to determine if it meets a specified contrast ratio?
-Multi-meter
-Histogram
-Lux Capacitor
-Spot Photometer
Design phase - Correct Answers -When working with a client to design an AV solution
for a new conference center, the client requests a detailed budget for the equipment
and installation. In what phase does this occur?
-Design phase
-Program phase
-Bidding phase
-Installation phase
correct Answers
Use an RT60 meter - Correct Answers -What is the BEST way to determine how
reverberant a space is?
-Clap your hands and listen for an echo
-Ask the client if anyone has complained that the room is too noisy
-Use an RT60 meter
-Use a DB SPL meter
Site survey - Correct Answers -The correct time to discuss visible finishes for wall
plates, surface mount speakers, and wall mounted screen casings is during the:
-Ordering
-Installation
-Site survey
-Contract award
Speak with the client about getting more information on how to address the noise
source - Correct Answers -While surveying a conference room for a system upgrade, an
engineer measures 55 dB SPL A-wtd of ambient noise when the room is empty. How
should they proceed? -Add voice lift to the system proposal
-Add more loudspeakers to the system proposal
-Speak with the client about getting more information on how to address the noise
source
-Do nothing, this level of ambient noise is well within system tolerance
Divisible room - Correct Answers -A client needs to add videoconferencing functionality
for high-level, private meetings. Which of following planned space types should you
advise be ruled out?
-Divisible room
-Boardroom
-Conference room -Classroom
The Design Phase - Correct Answers -Which phase of an AV project comes
immediately AFTER the Program Phase? -The Design Phase
-Project Planning and Coordination Phase
-The Verification Phase
-The Documentation Phase
,Detailed list of equipment - Correct Answers -Which is NOT presented in the program
report: -Executive Summary -Detailed list of equipment -Budgets
-Infrastructure Considerations
An overview of the programming process including who was surveyed during the
process. - Correct Answers -When preparing an executive summary what should be
included for submittal to the client?
-A deep dive, including full technical specficiation, of all equipment to be used in the
design.
-An estimation of how many change orders might be required if the client doesn't use
your design.
-References to new and emerging technologies that should be considered for future
spaces.
-An overview of the programming process including who was surveyed during the
process.
Additive color system - Correct Answers -Which system is used to show colors from a
video display?
-Additive color system -Subtractive color system -Plus/minus color system -Recover
color system
25 db - Correct Answers -An installed audio system should be AT LEAST __________
above the ambient noise floor.
-5 dB
-25 dB
-45 dB
-75 dB
RS-232 - Correct Answers -A device is controlled using the pictured cable. What is the
MOST LIKELY method of controlling this device?
-IR
-RF
-RS-232
-Network
5:1 - Correct Answers -The minimum load safety rating for mounting audio visual
equipment is:
-3:1
-5:1
-8:1
-10:1
- Correct Answers -__ is the process of examining methods, techniques, and principles
from peer organizations and facilities. Schematic Design Punching a system
Benchmarking Schematic Design
, - Correct Answers -The document which is presented to the end user as a summary of
the need analysis and site survey is called the: Scope Review AV Guidelines Document
Program Report Customer Site Documentation Report
- Correct Answers -When establishing initial contact with a client, try to develop a
relationship early on with the: Chief operating officer Information technology manager
Stakeholders Purchasing manager
- Correct Answers -What document provides a detailed record of all repairs and service
work associated with the Audio Visual systems? Service Manual Repair Guide
Maintenance Log As Built Drawings
- Correct Answers -In the needs analysis pyramid what is used to define tasks that will
be used to define the scope of the project? Functions and Features End User Needs
Applications The Program Report
On Friday afternoons. - Correct Answers -As part of regular system maintenance, when
is the BEST time to update device firmware?
-On Friday afternoons.
-As soon as updates are available.
-Device firmware should never be updated after system sign-off.
-After coordination with the client, and when the system will be available for an
extended period of time
Black Level - Correct Answers -The brightness controls on a display adjusts which
level?
-Black Level
-Chroma Level
-Hue
-White Level
Spot Photometer - Correct Answers -When verifying a display system, which of the
following should be used to determine if it meets a specified contrast ratio?
-Multi-meter
-Histogram
-Lux Capacitor
-Spot Photometer
Design phase - Correct Answers -When working with a client to design an AV solution
for a new conference center, the client requests a detailed budget for the equipment
and installation. In what phase does this occur?
-Design phase
-Program phase
-Bidding phase
-Installation phase
