PLUMBING 2024/2025 GRADED A+ TEST REVISION
QUESTIONS WITH 100% CORRECT ANSWERS
The modern word for plumber is derived from the Latin word for - A person
who works with lead
LEED applies to all areas of the profession, except - Renovation
Water that comes from laundry and bathtubs and reused in known as -
Graywater
Suggested national plumbing standards are called - Model codes
You are offered a job by another contractor before you have fulfilled your
current obligations. The professional response is to - Ask the contractor to wait
until you have met your obligations
Your supervisor points out that you forgot to complete a step in the assembly
of a drain in a DWV system. One of the apprentices that you are supervising
was a he person installing the drain. The responsible action is to - Take
responsibility for the work done under your supervision
People who develop, design, manufacture, and test mechanical devices are
called - Mechanical engineers
Project managers are responsible for - Controlling the scope and direction of a
plumbing business
The minimum standards for training programs in the United States are set by -
Office of Apprenticeship
,Participants in an NCCER training program receive all of the following except -
Certification as a master plumber
The non-profit_____________developed a system in 2000 they will certify a
building as "green" meaning it is energy efficient - United States Green Building
Council
Which of the following does not cause backflow - Insufficient levels of water
A student must complete_______hours of OJL per year, according to the office
of Apprenticeship - 2000
___________is the highest level of skill a craftsman can become in their craft
profession - Master craftsman
According to osha, a competent person is - A worker who can identify hazards
and is authorized to take prompt corrective measures
OHSA stands for - Occupational safety and health administration
One simple way to help ensure a safe work site is to - Check the job site
periodically and remove any clutter
When you wear a hard hat, the space between your head and the shell of the
hard hat should be - 1 inch
Air-purifying respirator cartridge absorbs certain toxic vapors from the through
- Charcoal
, The highest level of respiratory protection is provided by - Self-contained
breathing apparatus
To obtain the best protection from a respirator, you must perform a positive
and negative fit check - Every time you wear it
The SDS is a fact sheet prepared by - The product's manufacturer or importer
The most important things to look for on an SDS are the - Specific hazards,
personal protection requirements, handling procedures,first-aid information,
and the emergency-response telephone number
Section 4 of an SDS - List first aid measures
If your supervisor tells you to evacuate the worksite, you should - Go to a safe
location and wait until you are notified that conditions are safe
The sign or tag that is used to tell workers about potential hazards or unsafe
practices is a - Caution sign
The sign or tag that is used to tell workers about general information not
related to safety is an - Informational sign
The sign or tag that is used for general instructions and suggestions related to
safety measures is a - Safety instruction sign
The two types of protection for opening in walls, floors, or the ground are -
Guards and covers
QUESTIONS WITH 100% CORRECT ANSWERS
The modern word for plumber is derived from the Latin word for - A person
who works with lead
LEED applies to all areas of the profession, except - Renovation
Water that comes from laundry and bathtubs and reused in known as -
Graywater
Suggested national plumbing standards are called - Model codes
You are offered a job by another contractor before you have fulfilled your
current obligations. The professional response is to - Ask the contractor to wait
until you have met your obligations
Your supervisor points out that you forgot to complete a step in the assembly
of a drain in a DWV system. One of the apprentices that you are supervising
was a he person installing the drain. The responsible action is to - Take
responsibility for the work done under your supervision
People who develop, design, manufacture, and test mechanical devices are
called - Mechanical engineers
Project managers are responsible for - Controlling the scope and direction of a
plumbing business
The minimum standards for training programs in the United States are set by -
Office of Apprenticeship
,Participants in an NCCER training program receive all of the following except -
Certification as a master plumber
The non-profit_____________developed a system in 2000 they will certify a
building as "green" meaning it is energy efficient - United States Green Building
Council
Which of the following does not cause backflow - Insufficient levels of water
A student must complete_______hours of OJL per year, according to the office
of Apprenticeship - 2000
___________is the highest level of skill a craftsman can become in their craft
profession - Master craftsman
According to osha, a competent person is - A worker who can identify hazards
and is authorized to take prompt corrective measures
OHSA stands for - Occupational safety and health administration
One simple way to help ensure a safe work site is to - Check the job site
periodically and remove any clutter
When you wear a hard hat, the space between your head and the shell of the
hard hat should be - 1 inch
Air-purifying respirator cartridge absorbs certain toxic vapors from the through
- Charcoal
, The highest level of respiratory protection is provided by - Self-contained
breathing apparatus
To obtain the best protection from a respirator, you must perform a positive
and negative fit check - Every time you wear it
The SDS is a fact sheet prepared by - The product's manufacturer or importer
The most important things to look for on an SDS are the - Specific hazards,
personal protection requirements, handling procedures,first-aid information,
and the emergency-response telephone number
Section 4 of an SDS - List first aid measures
If your supervisor tells you to evacuate the worksite, you should - Go to a safe
location and wait until you are notified that conditions are safe
The sign or tag that is used to tell workers about potential hazards or unsafe
practices is a - Caution sign
The sign or tag that is used to tell workers about general information not
related to safety is an - Informational sign
The sign or tag that is used for general instructions and suggestions related to
safety measures is a - Safety instruction sign
The two types of protection for opening in walls, floors, or the ground are -
Guards and covers
