Carpentry Floor System (Module 5)
Exam Questions and Answers 100%
Solved
The type of construction where the floor of the structure is built as
an individual unit is? - ✔✔Platform Footings
For a building project, the type and quality of materials, methods
of construction, and location of the structure are included in the? -
✔✔Specifications
Which of the following would not be shown on the floor plan? -
✔✔Footings
Which of the following drawings show the location floor openings
for stairways? - ✔✔Floor Plan
When constructing wall panels for a platform framed structure, the
wall panels? - ✔✔Are all framed before the panel is raised.
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, After raising a wall panel for a platform frame, the panel should
first fastened to the? - ✔✔Subfloor
The sill plates are normally made of? - ✔✔2X8 Lumber
Building codes require any components in contact with the
ground, masonry, or concrete to be made of? - ✔✔Made from
treated lumber
For a given size, the type of support with the most strength is the?
- ✔✔Steel I-Beam
A rule of thumb for constructing burger pockets is that the pocket
should be at least 1 inch wider than the girder and the girder must
have a bearing on a wall of at least? - ✔✔4''
Which of the following is not an advantage of the metal web floor
truss - ✔✔They are more widely used than wood web trusses.
Before starting to install sill plates, check the foundation for? -
✔✔Squareness
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
Exam Questions and Answers 100%
Solved
The type of construction where the floor of the structure is built as
an individual unit is? - ✔✔Platform Footings
For a building project, the type and quality of materials, methods
of construction, and location of the structure are included in the? -
✔✔Specifications
Which of the following would not be shown on the floor plan? -
✔✔Footings
Which of the following drawings show the location floor openings
for stairways? - ✔✔Floor Plan
When constructing wall panels for a platform framed structure, the
wall panels? - ✔✔Are all framed before the panel is raised.
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, After raising a wall panel for a platform frame, the panel should
first fastened to the? - ✔✔Subfloor
The sill plates are normally made of? - ✔✔2X8 Lumber
Building codes require any components in contact with the
ground, masonry, or concrete to be made of? - ✔✔Made from
treated lumber
For a given size, the type of support with the most strength is the?
- ✔✔Steel I-Beam
A rule of thumb for constructing burger pockets is that the pocket
should be at least 1 inch wider than the girder and the girder must
have a bearing on a wall of at least? - ✔✔4''
Which of the following is not an advantage of the metal web floor
truss - ✔✔They are more widely used than wood web trusses.
Before starting to install sill plates, check the foundation for? -
✔✔Squareness
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
