Associate Safety Professional-Study Guide BCSP
Questions with Correct Answers 2024-2025.
Inspections - Correct Answer—
Identify or eliminate hazards
-Check compliance with organizational & regulatory standards.
-Determine the safety & health conditions in the work place.
-Assess safety programs
PDCA - Correct Answer-Plan, Do, Check, Act
Inspection Procedures - Correct Answer-
Purpose, Scope, Responsibilities & activities of inspection.
Hazard types - Correct Answer-
physical, chemical, biological & phycological
Audit - Correct Answer--Proactive
-Emphasizes prevention efforts more than loss experience.
Likert Scale - Correct Answer-Quantifiable score to show risk level of an audit.
Law & Ethics - Correct Answer-Law-Minimum standards set
Ethics-Highest standards set for a profession
BCSP Code of Ethics-HBIUACAS - Correct Answer-1.) HOLD paramount the safety and
health of people, the protection of the environment and protection of property in the
performance of professional duties.
2.) BE honest, fair, and impartial; act with responsibility and integrity
3.) ISSUE public statements only in an objective and truthful manner
,4.) UNDERTAKE assignments only when qualified by education or experience in the
specific technical fields involved.
5.) AVOID deceptive acts that falsify or misrepresent their academic or professional
qualifications
6.) CONDUCT their professional relations by the highest standards of integrity and avoid
compromise of their professional judgment by conflicts of interest.
7.) ACT in a manner free of bias, discrimination or harassment on the basis of race, color,
etc.
8.) SEEK opportunities to be of constructive service in civic affairs and work for the
advancement of the safety, health,
Machine Guarding-3 Main Parts - Correct Answer-1.) Point of operation-work is
performed on materials (Most Dangerous)
2.)Power transmission drive-all components that transmit energy
3.)Operating Controls
Machine Hazard Analysis - Correct Answer-Consider relationship between work, the
environment, the tools & the task at hand.
Lockout/Tagout-Hazardous Energy Controls Program - Correct Answer-A formal
procedure for taking equipment out of service and ensuring that it cannot be operated until
a qualified person has removed the lockout or tagout device (such as a lock or warning
tag).
Machine Protection Methods - Correct Answer--stopping machine
-restraining/withdrawing operators hand
-requiring both hands on machine to operate
-providing synchronized barrier.
photoelectric sensing safeguard - Correct Answer-light source, electric eye or curtain that
stops machine when the light field is broke.
,Radiofrequency safeguard - Correct Answer-radio beam, if broken will stop machine
Electromechanical Sensing safeguard - Correct Answer-probe or contact bar which
descends to the present distance and when obstructed shuts down machine.
Sound & Noise Measurements - Correct Answer-A-A sound level meter weighting that
makes its readings conform to a notional human hearing response. It is defined in various
international standards such as the IEC 61672, as well as in various national standards
such as ANSI S1.4.
C- looks more at the effect of low-frequency sounds on the human ear compared with the
A-weighting and is essentially flat or linear between 31.5Hz and 8kHz, the two - 3dB or
'half power' points.
Z- flat frequency response of 8Hz to 20kHz (+/- 1.5dB), this is the actual noise that is made
with no weighting at all for the human ear (Z for zero). Often used in octave band analysis
and for determining environmental noise.
Wave length - Correct Answer-Distance traveled by a sound wave during a sound cycle.
Measure in meters or feet.
Frequency - Correct Answer-measure the number of vibrations per second.
Measured in hertz (HZ) where one HZ equals one cycle per second.
decibles - Correct Answer-a measure of how loud a sound is (its intensity)
Sound Health Effects - Correct Answer--Noise induced threshold shifts.
-Acoustic trauma
-Tinnitus
Sound modification - Correct Answer-Process by which acoustic waves are received by
outer ear & are directed to the eardrum.
Process change
, Recommended Exposure Limit (REL) - Correct Answer-Exposure limit; generally a time-
weighted average; developed by NIOSH.
85 decibels at 8 hour average-World Wide Standard
90 decibels at 8 hours average-OSHA standard
Sound Exchange Rate - Correct Answer-For every 3 decibel increase in noise level, the
allowable exposure time is reduced by half.
Sound pressure level - Correct Answer-A designation used to indicate that the reference
pressure used for calculating a tone's decibel rating is set at 20 micropascals, near the
threshold in the most sensitive frequency range for hearing.
5 Hearing Safety Engineering Controls - Correct Answer-1.)Modification- Modify o replace
existing equipment
2.)Retrofit-Add sound protection to an existing operation.
3.)Relocation-relocate workers or high decibel equipment.
4/5.) Path & Receiver Treatment-PPE & Noise absorbing materials place in path of sound.
5 Performance Metrics (SMART) - Correct Answer-1.) Specific
2.) Measurable
3.) Attainable
4.) Relevant
5.) Time Based
Leading indicators (safety prevention) - Correct Answer-Safety meetings
supervisor training
reward recognition
observations/accident
Lagging indicators (consequences) - Correct Answer-Incident rates
lost time
director cost of incidents
Questions with Correct Answers 2024-2025.
Inspections - Correct Answer—
Identify or eliminate hazards
-Check compliance with organizational & regulatory standards.
-Determine the safety & health conditions in the work place.
-Assess safety programs
PDCA - Correct Answer-Plan, Do, Check, Act
Inspection Procedures - Correct Answer-
Purpose, Scope, Responsibilities & activities of inspection.
Hazard types - Correct Answer-
physical, chemical, biological & phycological
Audit - Correct Answer--Proactive
-Emphasizes prevention efforts more than loss experience.
Likert Scale - Correct Answer-Quantifiable score to show risk level of an audit.
Law & Ethics - Correct Answer-Law-Minimum standards set
Ethics-Highest standards set for a profession
BCSP Code of Ethics-HBIUACAS - Correct Answer-1.) HOLD paramount the safety and
health of people, the protection of the environment and protection of property in the
performance of professional duties.
2.) BE honest, fair, and impartial; act with responsibility and integrity
3.) ISSUE public statements only in an objective and truthful manner
,4.) UNDERTAKE assignments only when qualified by education or experience in the
specific technical fields involved.
5.) AVOID deceptive acts that falsify or misrepresent their academic or professional
qualifications
6.) CONDUCT their professional relations by the highest standards of integrity and avoid
compromise of their professional judgment by conflicts of interest.
7.) ACT in a manner free of bias, discrimination or harassment on the basis of race, color,
etc.
8.) SEEK opportunities to be of constructive service in civic affairs and work for the
advancement of the safety, health,
Machine Guarding-3 Main Parts - Correct Answer-1.) Point of operation-work is
performed on materials (Most Dangerous)
2.)Power transmission drive-all components that transmit energy
3.)Operating Controls
Machine Hazard Analysis - Correct Answer-Consider relationship between work, the
environment, the tools & the task at hand.
Lockout/Tagout-Hazardous Energy Controls Program - Correct Answer-A formal
procedure for taking equipment out of service and ensuring that it cannot be operated until
a qualified person has removed the lockout or tagout device (such as a lock or warning
tag).
Machine Protection Methods - Correct Answer--stopping machine
-restraining/withdrawing operators hand
-requiring both hands on machine to operate
-providing synchronized barrier.
photoelectric sensing safeguard - Correct Answer-light source, electric eye or curtain that
stops machine when the light field is broke.
,Radiofrequency safeguard - Correct Answer-radio beam, if broken will stop machine
Electromechanical Sensing safeguard - Correct Answer-probe or contact bar which
descends to the present distance and when obstructed shuts down machine.
Sound & Noise Measurements - Correct Answer-A-A sound level meter weighting that
makes its readings conform to a notional human hearing response. It is defined in various
international standards such as the IEC 61672, as well as in various national standards
such as ANSI S1.4.
C- looks more at the effect of low-frequency sounds on the human ear compared with the
A-weighting and is essentially flat or linear between 31.5Hz and 8kHz, the two - 3dB or
'half power' points.
Z- flat frequency response of 8Hz to 20kHz (+/- 1.5dB), this is the actual noise that is made
with no weighting at all for the human ear (Z for zero). Often used in octave band analysis
and for determining environmental noise.
Wave length - Correct Answer-Distance traveled by a sound wave during a sound cycle.
Measure in meters or feet.
Frequency - Correct Answer-measure the number of vibrations per second.
Measured in hertz (HZ) where one HZ equals one cycle per second.
decibles - Correct Answer-a measure of how loud a sound is (its intensity)
Sound Health Effects - Correct Answer--Noise induced threshold shifts.
-Acoustic trauma
-Tinnitus
Sound modification - Correct Answer-Process by which acoustic waves are received by
outer ear & are directed to the eardrum.
Process change
, Recommended Exposure Limit (REL) - Correct Answer-Exposure limit; generally a time-
weighted average; developed by NIOSH.
85 decibels at 8 hour average-World Wide Standard
90 decibels at 8 hours average-OSHA standard
Sound Exchange Rate - Correct Answer-For every 3 decibel increase in noise level, the
allowable exposure time is reduced by half.
Sound pressure level - Correct Answer-A designation used to indicate that the reference
pressure used for calculating a tone's decibel rating is set at 20 micropascals, near the
threshold in the most sensitive frequency range for hearing.
5 Hearing Safety Engineering Controls - Correct Answer-1.)Modification- Modify o replace
existing equipment
2.)Retrofit-Add sound protection to an existing operation.
3.)Relocation-relocate workers or high decibel equipment.
4/5.) Path & Receiver Treatment-PPE & Noise absorbing materials place in path of sound.
5 Performance Metrics (SMART) - Correct Answer-1.) Specific
2.) Measurable
3.) Attainable
4.) Relevant
5.) Time Based
Leading indicators (safety prevention) - Correct Answer-Safety meetings
supervisor training
reward recognition
observations/accident
Lagging indicators (consequences) - Correct Answer-Incident rates
lost time
director cost of incidents
