,TMS3733 Assignment 5 (COMPLETE ANSWERS)
2024 - DUE September 2024 ; 100% TRUSTED
Complete, trusted solutions and explanations.
QUESTION 1 The design process step 3 is referred to as the
make stage. It is important to plan for this stage. Planning
includes those activities which are involved when working out,
in advance, how a product, process or system is to be produced
or realised before actually doing it. Make notes regarding the
materials needed by finding answers to the following questions:
a. What different types of material are needed? (2) b. What
should the quality of the different materials be? (2) c. What are
the sizes of the available raw materials? (3) d. Will the different
materials have to be cut to size? (5) e. Will the different
materials have to be shaped? (5) f. What does the final finish of
the product or prototype have to be? (3) [20]
Step 3: The Make Stage
The make stage involves careful planning to ensure that the
necessary materials, processes, and systems are ready for
production. Here are the notes on the materials needed:
a. What different types of material are needed? (2)
Raw materials: These are the primary materials required
to create the product, which may include wood, metal,
plastic, fabric, etc.
, Supporting materials: Additional items such as adhesives,
paints, screws, or nails needed to assemble or finish the
product.
b. What should the quality of the different materials be? (2)
High durability: Materials should be strong, durable, and
appropriate for the function of the product.
Consistency and uniformity: The materials should be
uniform in texture, strength, and appearance to ensure the
product's reliability.
c. What are the sizes of the available raw materials? (3)
Standard sizes: Materials are often available in industry-
standard dimensions (e.g., wood planks, metal sheets,
fabric rolls).
Custom sizes: Depending on the design, some raw
materials may need to be ordered in specific sizes.
Stock availability: Consider the material sizes available
from suppliers to avoid unnecessary waste.
d. Will the different materials have to be cut to size? (5)
Wood: Likely needs to be cut to specific lengths or shapes
for structural or aesthetic purposes.
Metal: May require cutting for precise fitting or shaping for
mechanical parts.
2024 - DUE September 2024 ; 100% TRUSTED
Complete, trusted solutions and explanations.
QUESTION 1 The design process step 3 is referred to as the
make stage. It is important to plan for this stage. Planning
includes those activities which are involved when working out,
in advance, how a product, process or system is to be produced
or realised before actually doing it. Make notes regarding the
materials needed by finding answers to the following questions:
a. What different types of material are needed? (2) b. What
should the quality of the different materials be? (2) c. What are
the sizes of the available raw materials? (3) d. Will the different
materials have to be cut to size? (5) e. Will the different
materials have to be shaped? (5) f. What does the final finish of
the product or prototype have to be? (3) [20]
Step 3: The Make Stage
The make stage involves careful planning to ensure that the
necessary materials, processes, and systems are ready for
production. Here are the notes on the materials needed:
a. What different types of material are needed? (2)
Raw materials: These are the primary materials required
to create the product, which may include wood, metal,
plastic, fabric, etc.
, Supporting materials: Additional items such as adhesives,
paints, screws, or nails needed to assemble or finish the
product.
b. What should the quality of the different materials be? (2)
High durability: Materials should be strong, durable, and
appropriate for the function of the product.
Consistency and uniformity: The materials should be
uniform in texture, strength, and appearance to ensure the
product's reliability.
c. What are the sizes of the available raw materials? (3)
Standard sizes: Materials are often available in industry-
standard dimensions (e.g., wood planks, metal sheets,
fabric rolls).
Custom sizes: Depending on the design, some raw
materials may need to be ordered in specific sizes.
Stock availability: Consider the material sizes available
from suppliers to avoid unnecessary waste.
d. Will the different materials have to be cut to size? (5)
Wood: Likely needs to be cut to specific lengths or shapes
for structural or aesthetic purposes.
Metal: May require cutting for precise fitting or shaping for
mechanical parts.
