Massachusetts 2A Hoisting License Questions and Answers Graded A+

Massachusetts 2A Hoisting License Questions and Answers Graded A+ A 2A license allows the license holder to operate what? excavators, backhoes and loaders, front-end loaders, compact hoisting machinery excluding classes 1, 3 & 4. Fine for operating without a license $500-$3000 and or 3 months in jail What law governs hoisting equipment? M.G.L. c. 146 section 53 What regulations govern hoisting equipment? 520 CMR 6 What organization enforces 520 CMR 6 Division of Professional Licensure, Office of Public Safety and Inspections. What regulations govern trenching? 520 CMR 14 - Jackie's Law OSHA regulations OSHA 1910 & 1926 ANSI American National Standards Institute ASME American Society of Mechanical Engineers Compact hoisting machinery hoisting machinery under 10,000 lbs DOT Department of Transportation Emergency Procedure Actions required to be taken when imminent danger may occur Property damage Damage to property exceeding $5000 Minimum age to obtain a 2A license 18 SAE Society of Automotive Engineers Hand signal rules for excavators SAE J Equipment that requires a license to operate 10' vertical lift, 1/4 yd bucket capacity, 500 lb lift capacity Continuing education credit hours are required for a 2A license 4 hrs Inactive status By request for 1 year for failure to obtain required credit hours. Cannot operate under license. Maintenance, repair, and refueling can be performed only when When machine is inoperable and secure OSHA required daily logs must include inspection of all parts subject to wear Inspection records must be kept with the hoisting machinery at all times Prior to starting the machinery the operator must make a complete walk-around (circle check), making sure the equipment is free of people and safe to operate. With regards to distractions, the operator shall not engage in any practice that will divert their attention. With regards to operating machinery with a rotating superstructure erection of barricades or warning lines to prevent entry into the swinging superstructure's radius. With regards to signaling operators are shall only respond to signal persons unless there is an emergency Securing unattended machinery is the responsibility of the operator prior to leaving the equipment Is walking under an loaded bucket permitted No way Minimum clearance from power lines 10 ft Dig safe and utilities not covered by them must be contacted prior to any excavation With regard to Dig Safe permitting operators must have a permit number, start date and time. With regards to operator exposure to the