F60 Fireguard test Exam Questions And Answers

F60 Fireguard test Exam Questions And Answers For hot work operation with citywide permit, the owner of the premises of the hot work operation areas must be notified in writing by the citywide permit holder ______ the hot work is to be started. - ANS at least 48 hours before The pre-hot work check must be conducted by the responsible person before hot work is authorized and __________ - ANS least once per day. The check reports must be kept at the work site during the work, made available for inspection by a representative of the FDNY, and maintained on the premises for a minimum of - ANS 48 hours after work is complete. A pre-hot work check must be conducted at least - ANS once per day Hot work operations involving cutting or welding shall be conducted at least - ANS 35 feet from combustible materials and combustible waste All other hot work operations shall be conducted at least - ANS 25 feet from combustible materials and combustible waste Sprinkler system protection ____________while hot work is performed. - ANS must not be shut off or impaired When should a Fire watch be maintained - ANS A fire watch must be maintained during any hot work operation. What other duties should the Fire Watch have while on hot water operations. - ANS The persons conducting a fire watch shall not have other duties. Where hose lines are required, they shall be connected, charged and ready for operation - ANS At least one portable fire extinguisher with a minimum 2-A:20-B:C How far away should one fire extinguisher be from any operation - ANS 30 feet The fire watch for torch operations conducted at the following three locations shall be conducted by at least one F-60 fire guard - ANS (1)Construction sites. (2)In any building or structure, when the torch operation is conducted by a person holding a citywide permit for torch operations. (3)On any rooftop, or in connection with any torch-applied roofing system operation.